journal article·2024-01-01Open access

Light power resource availability for energy harvesting photovoltaics for self-powered IoT

Krishna Seunarine, Zaid Haymoor, Michael Spence, Gregory Burwell, Austin Kay, Paul Meredith, Ardalan Armin, Matt Carnie

Journal of Physics: Energy· Volume 6· Issue 1

Abstract

Abstract As the Internet of Things (IoT) expands, the need for energy-efficient, self-powered devices increases and so a better understanding of the available energy resource is necessary. We examine the light power resource availability for energy harvesting photovoltaics (PV) in various environments and its potential for self-powered IoT applications. We analyse light sources, considering spectral distribution, intensity, and temporal variations, and evaluate the impact of location, seasonal variation, and time of day on light power availability. Additionally, we discuss human and building design factors, such as occupancy, room aspect, sensor placement, and décor, which influence light energy availability and therefore power for IoT electronics. We propose a best-case and non-ideal scenario in terms of light resource for energy-harvesting, and using a commercially available organic PV cell, show that the energy yield generated and available to the IoT electronics, can be anywhere between 0.7 mWh and 75 mWh per day, depending on the lighting conditions.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Energy Harvesting in Wireless Networks · Green IT and Sustainability · Innovative Energy Harvesting Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (82)

Show source-provided references
1. Technology and market perspective for indoor photovoltaic cells10.1016/j.joule.2019.03.026 ↗
2. Dye-sensitized solar cell for indoor applications: a mini-review10.1007/s11664-021-08854-3 ↗
3. High-efficiency indoor organic photovoltaics with a band-aligned interlayer10.1016/j.joule.2020.05.010 ↗
4. Halide perovskites for indoor photovoltaics: the next possibility10.1021/acsenergylett.2c02268 ↗
5. Will the internet of things be perovskite powered? Energy yield measurement and real-world performance of perovskite solar cells in ambient light conditions10.3390/iot3010006 ↗
6. Smart household environment illumination dimming and control10.1109/JDT.2015.2455152 ↗
7. Preferred lighting levels: variability among settings, behaviors, and individuals10.1177/0013916587196003 ↗
8. Relationship between window-to-floor area ratio and single-point daylight factor in varied residential rooms in Malaysia10.17485/ijst/2016/v9i33/86216 ↗
9. Preferred luminous conditions in open-plan offices: implications for lighting quality recommendations10.1177/096032710003200404 ↗
10. Energy efficient lighting in plant factories: addressing utilance10.3390/agronomy11122570 ↗
11. A study on the various light source radiation conditions and use of LED illumination for plant factory10.5207/JIEIE.2011.25.10.014 ↗
12. Modern technologies for improving cleaning and disinfection of environmental surfaces in hospitals10.1186/s13756-016-0111-x ↗
13. Hospital lighting and its association with sleep, mood and pain in medical inpatients10.1111/jan.12282 ↗
14. Colour and lighting in hospital design10.1016/j.optlastec.2005.06.040 ↗
15. The efficiency, energy intensity and visual impact of the accent lighting in the retail grocery stores10.5219/398 ↗
16. Effects of color and lighting on retail impression and identity10.1016/j.jenvp.2016.04.015 ↗
17. Expressive lighting for interactive entertainment10.1109/ICME.2003.1220945 ↗
18. A study on light intensity in public-use underground carpark10.1109/ISPCE-CN51288.2020.9321816 ↗
19. Natural lighting in the hall of two hundred. A proposal for exhibition of its ancient tapestries10.1016/j.culher.2009.02.005 ↗
20. Lighting design in museums: exhibition vs. preservation10.2495/STR110171 ↗
21. Natural light design for an ancient building: a case study10.1016/j.culher.2007.07.007 ↗
22. Colourising daylight in buildings: visual responses in a daylit room supplemented with colour-changing light-emitting diode luminaires10.1177/1420326X16666387 ↗
23. Affective ambiences created with lighting for older people10.1177/1477153514560423 ↗
24. The effects of dressing room lighting on consumers’ perceptions of self and environment10.1111/j.1939-1668.2009.01037.x ↗
25. A fully-integrated 71 nW CMOS temperature sensor for low power wireless sensor nodes10.1109/JSSC.2014.2325574 ↗
26. An ultra low power CMOS motion detector10.1109/TCE.2009.5373819 ↗
27. Low-power organic light sensor array based on active-matrix common-gate transimpedance amplifier on foil for imaging applications10.1109/JSSC.2020.2993732 ↗
28. A review of nanostructure-based gas sensors in a power consumption perspective10.1016/j.snb.2022.132612. ↗
29. A low power humidity sensor with CMOS compatible for wireless sensor network10.1109/ICSENS.2009.5398415 ↗
30. Scaling considerations for organic photovoltaics for indoor applications10.1002/sol.202200315 ↗
31. Interlaboratory comparison of solar cell measurements under low indoor lighting conditions10.1109/JPHOTOV.2021.3104144 ↗
32. Light level, visual comfort and lighting energy savings potential in a green-certified high-rise building10.1016/j.jobe.2020.101198 ↗
33. Blue-enriched white light in the workplace improves self-reported alertness, performance and sleep quality10.5271/sjweh.1268 ↗
34. An assessment of a hybrid lighting system that employs ultraviolet-A for mitigating healthcare-associated infections in a newborn intensive care unit10.1177/1477153520904107 ↗
35. The evening light environment in hospitals can be designed to produce less disruptive effects on the circadian system and improve sleep10.1093/sleep/zsaa194 ↗
36. Effect of retail display illumination and headspace oxygen concentration on cured boiled sausages10.1016/j.fpsl.2014.04.003 ↗
37. Role of white light intensity and photoperiod during retail in broccoli shelf-life10.1016/j.postharvbio.2020.111121 ↗
38. The impact of retail light source on greening of russet burbank potato tubers10.1007/s12230-017-9616-y ↗
39. While continuous white LED lighting increases chlorophyll content (SPAD), green LED light reduces the infection rate of lettuce during storage and shelf-life conditions10.1111/jfpp.13266 ↗
40. Indoor photovoltaics: photoactive material selection, greener ink formulations, and slot-die coated active layers10.1021/acsami.9b19549 ↗
41. Over 30% efficient indoor organic photovoltaics enabled by morphological modification using two compatible non-fullerene acceptors10.1002/aenm.202200275 ↗
42. Engineering the Hole extraction interface enables single-crystal MAPbI3 perovskite solar cells with efficiency exceeding 22% and superior indoor response10.1002/aenm.202103241 ↗
43. Enhancement of exciton separation in indoor perovskite photovoltaics by employing conjugated organic chromophores10.1016/j.jpowsour.2021.230785 ↗
44. Enhanced hole-carrier selectivity in wide bandgap halide perovskite photovoltaic devices for indoor internet of things applications10.1002/adfm.202008908 ↗
45. Trap state induced recombination effects on indoor organic photovoltaic cells10.1021/acsenergylett.1c01336 ↗
46. Dopant-free polymer HTM-based CsPbI2Br solar cells with efficiency over 17% in sunlight and 34% in indoor light10.1002/adfm.202103614 ↗
47. Accurate photovoltaic measurement of organic cells for indoor applications10.1016/j.joule.2021.03.029 ↗
48. Indoor organic photovoltaics: optimal cell design principles with synergistic parasitic resistance and optical modulation effect10.1002/aenm.202003103 ↗
49. Organic photovoltaic cells with high efficiencies for both indoor and outdoor applications10.1039/D0QM00633E ↗
50. All-polymer indoor photovoltaic modules10.1016/j.isci.2021.103104 ↗
51. Indoor light-harvesting dye-sensitized solar cells surpassing 30% efficiency without co-sensitizers10.1039/D1MA00829C ↗
52. A highly crystalline non-fullerene acceptor enabling efficient indoor organic photovoltaics with high EQE and fill factor10.1016/j.joule.2021.03.020 ↗
53. Impermeable inorganic ‘walls’ sandwiching perovskite layer toward inverted and indoor photovoltaic devices10.1016/j.nanoen.2021.106286 ↗
54. The effects of crystal structure on the photovoltaic performance of perovskite solar cells under ambient indoor illumination10.1016/j.solener.2021.01.052 ↗
55. All-polymer indoor photovoltaics based on polymer acceptors with various bandgap10.1016/j.orgel.2021.106134 ↗
56. Recent progress in indoor organic photovoltaics10.1039/D0NR00816H ↗
57. In-depth analysis of defects in TiO2 compact electron transport layers and impact on performance and hysteresis of planar perovskite devices at low light10.1016/j.solmat.2020.110448 ↗
58. Evaluation of indoor photovoltaic power production under directional and diffuse lighting conditions10.1016/j.solmat.2019.110010 ↗
59. Tailoring triple-anion perovskite material for indoor light harvesting with restrained halide segregation and record high efficiency beyond 36%10.1002/aenm.201901980 ↗
60. Bandgap engineering enhances the performance of mixed-cation perovskite materials for indoor photovoltaic applications10.1002/aenm.201901863 ↗
61. Organic photovoltaic cells-promising indoor light harvesters for self-sustainable electronics10.1039/C7TA10875C ↗
62. Outstanding indoor performance of perovskite photovoltaic cells—effect of device architectures and interlayers10.1002/solr.201800207 ↗
63. A large, ultra-black, efficient and cost-effective dye-sensitized solar module approaching 12% overall efficiency under 1000 lux indoor light10.1039/C7TA09322E ↗
64. Dye-sensitized solar cells for efficient power generation under ambient lighting10.1038/nphoton.2017.60 ↗
65. Development of an indoor photovoltaic energy harvesting module for autonomous sensors in building air quality applications10.1109/JIOT.2017.2754981 ↗
66. Toward high-performance polymer photovoltaic devices for low-power indoor applications10.1002/solr.201700174 ↗
67. Mesoporous perovskite solar cells and the role of nanoscale compact layers for remarkable all-round high efficiency under both indoor and outdoor illumination10.1016/j.nanoen.2016.10.030 ↗
68. Is organic photovoltaics promising for indoor applications?10.1063/1.4954268 ↗
69. GaAs solar cells for indoor light harvesting10.1109/PVSC.2014.6924971. ↗
70. Characterization of photovoltaic modules for low-power indoor application10.1016/j.apenergy.2012.07.001 ↗
71. Photovoltaic sample-and-hold circuit enabling MPPT indoors for low-power systems10.1109/TCSI.2011.2173393 ↗
72. Flexible, long-lived, large-area, organic solar cells10.1016/j.solmat.2006.10.013 ↗
73. 100 cm2 organic photovoltaic cells with 23% efficiency under indoor illumination10.1007/s10118-022-2761-x ↗
74. Lighting of work places—Part 1: Indoor Work Places. European Standard10.3403/BSEN12464 ↗
75. Modelling of the temperature and current dependence of LED spectra10.2150/jlve.32.288 ↗
76. Color-temperature performance of perovskite solar cells under indoor illumination10.1016/j.solmat.2023.112284 ↗
77. Detailed balance limit of efficiency of p‐n junction solar cells10.1063/1.1736034 ↗
78. The thermodynamic limit of indoor photovoltaics based on energetically-disordered semiconductors10.1002/solr.202300277 ↗
79. Influence of light reflection from the wall and ceiling due to color changes in the indoor environment of the selected hall10.3390/app12105154 ↗
80. Development of a simplified light reflectance value assessment tool for indoor surface coverings10.1177/1420326X20925138 ↗
81. Maximum efficiencies of indoor photovoltaic devices10.1109/JPHOTOV.2012.2225023 ↗
82. International Electrotechnical Commission