journal article·2016-01Open access

Oxygen nonstoichiometry, defect equilibria, and thermodynamic characterization of LaMnO3 perovskites with Ca/Sr A-site and Al B-site doping

M. Takacs, M. Hoes, M. Caduff, T. Cooper, J.R. Scheffe, A. Steinfeld

Acta Materialia· Volume 103

Abstract

This work encompasses the thermodynamic characterization of four doped lanthanum manganites, namely La0.6 A0.4Mn1−yAlyO3 (A = Ca, Sr and y = 0, 0.4), all showed to be promising redox materials for the solar thermochemical splitting of H2O and CO2 to H2 and CO. We present oxygen nonstoichiometry measurements in the temperature range T = 1573 K–1773 K and oxygen partial pressure range pO2 = 4.5066 × 10−2 bar–9.9 × 10−5 bar. For a given T and pO2, oxygen nonstoichiometry is found to be higher when replacing the divalent dopant Sr in La0.6Sr0.4MnO3 by the divalent Ca but also increases significantly when additionally doping 40 mol-% Al to the Mn-site. La0.6Ca0.4Mn0.6Al0.4O3 revealed the highest mass specific oxygen release, 0.290 mol O2 per kg metal oxide at T = 1773 K and pO2 = 2.360 × 10−3 bar and 0.039 mol kg−1 at T = 1573 K and pO2 = 4.5066 × 10−2 bar. It is shown that the chemical defect equilibrium of all four perovskites can be accurately described by the two simultaneous redox couples Mn4+/Mn3+ and Mn3+/Mn2+. Thermodynamic properties, namely partial molar enthalpy, entropy and Gibbs free energy are consequently extracted from the defect models. Partial molar enthalpy decreases with increasing oxygen nonstoichiometry for the Al-doped perovskites whereas the opposite trend is observed for the others. The enthalpy falls within the range 260–300 kJ mol−1 for all the materials. Equilibrium hydrogen yields upon oxidation with H2O are determined as a function of redox conditions. Although reduction extents of the perovskites are greater compared to CeO2, oxidation with H2O and CO2 is thermodynamically less favorable. This leads to lower mass specific fuel productivity compared to CeO2 under most conditions relevant for solar thermochemical cycles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Chemical Looping and Thermochemical Processes · Advancements in Solid Oxide Fuel Cells · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. A thermochemical study of ceria: exploiting an old material for new modes of energy conversion and CO2 mitigation10.1098/rsta.2010.0114 ↗
2. Thermal ZnO dissociation in a rapid aerosol reactor as part of a solar hydrogen production cycle10.1016/j.ijhydene.2007.10.021 ↗
3. Two-step water splitting using mixed-metal ferrites: thermodynamic analysis and characterization of synthesized materials10.1021/ef8005004 ↗
4. A two-step thermochemical water splitting by iron-oxide on stabilized zirconia10.1115/1.1878852 ↗
5. Oxygen exchange materials for solar thermochemical splitting of H2O and CO2: a review10.1016/j.mattod.2014.04.025 ↗
6. Thermodynamic analysis of cerium-based oxides for solar thermochemical fuel production10.1021/ef201875v ↗
7. Oxygen nonstoichiometry and thermodynamic characterization of Zr doped ceria in the 1573–1773 K temperature range10.1039/C4CP04916K ↗
8. Synthesis, characterization, and thermochemical redox performance of Hf4+, Zr4+, and Sc3+ doped ceria for splitting CO210.1021/jp4050572 ↗
9. Investigation of reactive cerium-based oxides for H2 production by thermochemical two-step water-splitting10.1007/s10853-010-4506-4 ↗
10. Structural characterization and oxygen nonstoichiometry of ceria-zirconia (Ce1−xZrxO2−δ) solid solutions10.1016/j.actamat.2013.04.001 ↗
11. Thermogravimetric analysis of zirconia-doped ceria for thermochemical production of solar fuel10.4236/ajac.2013.410A1005 ↗
12. Ceria–zirconia solid solutions (Ce1–xZrxO2−δ, x ≤ 0.2) for solar thermochemical water splitting: a thermodynamic study10.1021/cm503131p ↗
13. Reactivity of CeO2-based ceramics for solar hydrogen production via a two-step water-splitting cycle with concentrated solar energy10.1016/j.ijhydene.2011.07.089 ↗
14. Lanthanum–strontium–manganese perovskites as redox materials for solar thermochemical splitting of H2O and CO210.1021/ef301923h ↗
15. Oxygen nonstoichiometry and defect equilibrium in the perovskite-type oxides La1−xSrxMnO3+δ10.1016/S0167-2738(99)00323-9 ↗
16. Thermodynamic and kinetic assessments of strontium-doped lanthanum manganite perovskites for two-step thermochemical water splitting10.1039/C4TA02694B ↗
17. Sr-and Mn-doped LaAlO3−δ for solar thermochemical H2 and CO production10.1039/c3ee41372a ↗
18. Noteworthy performance of La1-xCaxMnO3 perovskites in generating H2 and CO by the thermochemical splitting of H2O and CO210.1039/C4CP04578E ↗
19. Ln0.5A0.5MnO3 (Ln=Lanthanide, A= Ca, Sr) perovskites exhibiting remarkable performance in the thermochemical generation of CO and H2 from CO2 and H2O10.1002/chem.201500442 ↗
20. Investigation of perovskite structures as oxygen-exchange redox materials for hydrogen production from thermochemical two-step water-splitting cycles10.1021/jp5034849 ↗
21. Lanthanum manganite perovskites with Ca/Sr A-site and Al B-site doping as effective oxygen exchange materials for solar thermochemical fuel production10.1002/ente.201500226 ↗
22. Perovskite La0.6Sr0.4Cr1-xCoxO3-δ solid solutions for solar-thermochemical fuel production: strategies to lower the operation temperature10.1039/C5TA02519B ↗
23. Physico-chemical changes in Ca, Sr and Al-doped La-Mn-O perovskites upon thermochemical splitting of CO2 via redox cycling10.1039/C4CP05898D ↗
24. Oxidation-reduction behavior of undoped and Sr-doped LaMnO3 nonstoichiometry and defect structure10.1016/0022-4596(89)90053-4 ↗
25. A new defect model to describe the oxygen deficiency in perovskite-type oxides10.1016/0022-4596(91)90290-X ↗
26. Defect chemistry of (La,Sr)MnO310.1111/j.1151-2916.1998.tb02297.x ↗
27. Oxygen nonstoichiometry and defect structure analysis of B-site mixed perovskite-type oxide (La, Sr)(Cr, M)O3−δ (M=Ti, Mn and Fe)10.1016/j.jssc.2008.08.015 ↗
28. Oxygen nonstoichiometry, defect structure and defect-induced expansion of undoped perovskite LaMnO3±δ10.1016/j.ssi.2010.02.024 ↗
29. Thermodynamic properties, defect analysis, and electrical conductivity of the La0.8Sr0.2ScxMn1-xO3−δ infiltrated into YSZ scaffolds10.1149/2.043111jes ↗
30. Relations between the concentrations of imperfections in crystalline solids10.1016/S0081-1947(08)60135-6 ↗
31. Evaluation of manganese and oxygen content in La0.7Sr0.3MnO3−δ and correlation with the thermodynamic data10.1007/s10008-010-1093-x ↗
32. Influence of composition and particle size on spin dynamics and thermodynamic properties of magnetoresistive perovskites10.1166/jnn.2008.D127 ↗
33. Smith · 2005
34. Production of hydrogen by direct thermal decomposition of water10.1016/0360-3199(83)90175-1 ↗
35. Demonstration of the entire production chain to renewable kerosene via solar thermochemical splitting of H2O and CO210.1021/acs.energyfuels.5b00351 ↗