Time-dependent corrosion response of cobalt alloy implants to hyaluronic acid–phospholipid vesicles
Source abstract
Abstract
Cobalt-chromium-molybdenum (CoCrMo) alloys are widely used in orthopedic implants, where their long-term performance depends on maintaining corrosion resistance in the complex synovial joint environment. While phospholipids are well known for their lubricating properties, their direct influence on electrochemical reactivity of implant alloys remains largely unexplored. This study investigates the corrosion behavior of CoCrMo in a biomimetic medium containing hyaluronic acid-phospholipid vesicles, compared with a standard cell culture solution, across immersion times of 1, 5, 24, 120, and 168 hours. Electrochemical tests, including open circuit potential, anodic polarization, and electrochemical impedance spectroscopy, were complemented by scanning electron microscopy to evaluate surface changes. Results show that phospholipids exert a time-dependent, ambivalent effect: at short immersion times, vesicle adsorption perturbs the passive oxide film, reducing corrosion resistance; with longer exposures, vesicle self-assembly stabilizes the surface, increases capacitance, and enhances the protective nature of the passive layer. This study demonstrates that phospholipids at CoCrMo implant surfaces influence electrochemical behavior locally and dynamically rather than uniformly across the implant's surface. Clinically, these findings highlight that phospholipid adsorption may transiently limit corrosion and reduce metal ion release immediately after implantation, though mechanical loading could disrupt the protective coverage and promote localized tribocorrosion. These insights expand the understanding of implant-biomolecule interactions and suggest new directions for surface engineering and the design of advanced coatings or synthetic synovial fluids to improve implant longevity. STATEMENT OF SIGNIFICANCE: Phospholipids in synovial fluid are widely recognized for their lubricating role, yet their direct electrochemical interactions with metal alloys remain poorly understood. This work is the first to demonstrate the time-dependent, ambivalent influence of hyaluronic acid-phospholipid vesicles on the corrosion resistance of cobalt-chromium-molybdenum (CoCrMo) alloys. Unlike traditional corrosion studies that rely on simple saline or buffer solutions, our approach employs a biomimetic medium to capture clinically relevant interactions. The finding that phospholipids can both destabilize and later stabilize the alloy surface challenges current assumptions and opens a new research direction in implant science. This study provides mechanistic insights with broad implications for implant longevity, surface engineering, and the design of next-generation biomaterials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. The physiological function of hyaluronic acid in synovial fluid; viscous, elastic and lubricant properties10.1113/jphysiol.1953.sp004842 ↗
2. Synovial extracellular vesicles: structure and role in synovial fluid tribological performances10.3390/ijms231911998 ↗
3. Lubrication and wear properties of grafted polyelectrolytes, hyaluronan and hylan, measured in the surface forces apparatus10.1002/jbm.a.30123 ↗
4. Influence of protein and lipid concentration of the test lubricant on the wear of ultra high molecular weight polyethylene10.1016/j.triboint.2007.11.010 ↗
5. The effects of lubricant composition on in vitro wear testing of polymeric acetabular components10.1002/jbm.b.10077 ↗
6. IL-1β inhibits the lubricating mechanisms of articular cartilage10.1016/j.joca.2016.01.652 ↗
7. Viscoelastic shear properties of articular cartilage and the effects of glycosidase treatments10.1002/jor.1100110602 ↗
8. The molecular structure of lubricating glycoprotein-I, the boundary lubricant for articular cartilage10.1016/S0021-9258(19)69297-5 ↗
9. The isolation and properties of a second glycoprotein (LGP-II) from the articular lubricating fraction from bovine synovial fluid10.1042/bj1790465 ↗
10. Surface-active phospholipid as the lubricating component of lubricin10.1093/rheumatology/37.1.21 ↗
11. Multiscale analysis of the tribological role of the molecular assemblies of synovial fluid. Case of a healthy joint and implants10.1016/j.triboint.2007.02.008 ↗
12. Tribological properties of fluid phase phospholipid bilayers10.1016/j.triboint.2011.08.015 ↗
13. Boundary lubrication of joints: characterization of surface-active phospholipids found on retrieved implants10.1080/17453670710013852 ↗
14. Surface-active phospholipid in total hip arthroplasty10.1097/00003086-200203000-00020 ↗
15. Berrien SLJ. Biotribology: studies of the effects of biochemical environments on the wear and damage of articular cartilage 1999.
16. Role of nanomechanical properties in the tribological performance of phospholipid biomimetic surfaces10.1021/la8005234 ↗
17. Surfactants identified in synovial fluid and their ability to act as boundary lubricants10.1136/ard.43.4.641 ↗
18. Phospholipid composition of articular cartilage boundary lubricant10.1016/S0736-0266(00)00064-4 ↗
19. Sliding friction analysis of phosphatidylcholine as a boundary lubricant for articular cartilage10.1243/PIME_PROC_1993_207_268_02 ↗
20. Phospholipids as boundary lubricants in wear tests of prosthetic joint materials10.1016/S0043-1648(96)07482-0 ↗
21. The effect of surface-active phospholipids on the lubrication of osteoarthritic sheep knee joints: friction10.1023/B:TRIL.0000015209.68635.3b ↗
22. The effect of hyaluronic acid and phospholipid based lubricants on friction within a human cartilage damage model10.1016/j.biomaterials.2006.04.018 ↗
23. Passive and transpassive behaviour of CoCrMo in simulated biological solutions10.1016/j.electacta.2003.12.043 ↗
24. Electrochemical characterisation of biomedical alloys for surgical implants in simulated body fluids10.1016/j.corsci.2008.04.002 ↗
25. The composition of the surface passive film formed on CoCrMo alloy in simulated physiological solution10.1016/S0013-4686(03)00396-7 ↗
26. Induction of apoptosis and necrosis by metal ions in vitro10.1016/j.arth.2004.09.011 ↗
27. In vitro degradation of pure Mg in response to glucose10.1038/srep13026 ↗
28. Characterization of the surface oxide film of a Co-Cr-Mo alloy after being located in quasi-biological environments using XPS10.1016/S0169-4332(01)00551-7 ↗
29. The effects of calcium phosphate deposition upon corrosion of CoCr alloys and the potential for implant failure10.1002/jbm.a.30430 ↗
30. Electrodissolution of cobalt in carbonate/bicarbonate media10.1016/S0013-4686(02)00542-X ↗
31. The electrochemical dissolution of cobalt in carbonate-bicarbonate solutions from EIS and steady polarization data10.1016/j.corsci.2007.07.001 ↗
32. Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. I. Mechanically polished samples
33. Interactive effects of albumin and phosphate ions on the corrosion of CoCrMo implant alloy10.1149/1.2764238 ↗
34. Hyaluronic acid stimulates the formation of calcium phosphate on CoCrMo alloy in simulated physiological solution10.1007/s10856-012-4827-8 ↗
35. Cobalt-based alloys for orthopaedic applications studied by electrochemical and XPS analysis10.1023/B:JMSM.0000030204.08616.3d ↗
36. Electrochemical behavior of metals in the biological milieu
37. Role of the biomolecular interactions in the structure and tribological properties of synovial fluid10.1016/j.triboint.2012.06.015 ↗
38. The role of SAPL as a boundary lubricant in prosthetic joints10.1016/j.triboint.2005.11.006 ↗
39. Phospholipid vesicles in media for tribological studies against live cartilage10.3390/lubricants6010019 ↗
40. Phospholipid composition of articular cartilage boundary lubricant10.1016/S0736-0266(00)00064-4 ↗
41. Lubrication of articular cartilage10.1146/annurev-bioeng-081514-123305 ↗
42. Lubrication and cartilage
43. Sliding friction analysis of phosphatidylcholine as a boundary lubricant for articular cartilage10.1243/PIME_PROC_1993_207_268_02 ↗
44. Phospholipid vesicles in media for tribological studies against live cartilage10.3390/lubricants6010019 ↗
45. Surfactants identified in synovial fluid and their ability to act as boundary lubricants10.1136/ard.43.4.641 ↗
46. Lipid composition of the tissues of human knee joints. II. Synovial fluid in trauma10.1097/00003086-198411000-00052 ↗
47. Hyaluronic acid in synovial fluid. I. Molecular parameters of Hyaluronic acid in normal and arthritic Human fluids10.1002/art.1780100407 ↗
48. Characterization of implant materials in fetal bovine serum and sodium sulfate by electrochemical impedance spectroscopy. I. Mechanically polished samples
49. Molecular dynamic analysis of hyaluronic acid and phospholipid interaction in tribological surgical adjuvant design for osteoarthritis10.3390/molecules22091436 ↗
50. Tribological properties of fluid phase phospholipid bilayers10.1016/j.triboint.2011.08.015 ↗
51. Role of nanomechanical properties in the tribological performance of phospholipid biomimetic surfaces10.1021/la8005234 ↗
52. Evaluation of articular cartilage wear against pyrolytic carbon in the context of spherical interposition shoulder arthroplasty
53. Interactive effects of albumin and phosphate ions on the corrosion of CoCrMo implant alloy10.1149/1.2764238 ↗
54. Effect of electrochemical corrosion on the subsurface microstructure evolution of a CoCrMo alloy in albumin containing environment10.1016/j.apsusc.2017.02.152 ↗
55. Articular joint lubricants during osteoarthritis and rheumatoid arthritis display altered levels and molecular species10.1371/journal.pone.0125192 ↗
56. Tribological properties of fluid phase phospholipid bilayers10.1016/j.triboint.2011.08.015 ↗
57. Metal ion levels and functional results after either resurfacing hip arthroplasty or conventional metal-on-metal hip arthroplasty10.3109/17453674.2011.625533 ↗
58. Mechanical and spectroscopic analysis of retrieved/failed dental implants10.3390/coatings7110201 ↗
59. High prevalence of biofilms on retrieved implants from aseptic pseudarthrosis cases10.22603/ssrr.2020-0147 ↗
60. Tribolayer formation in a metal-on-metal (MoM) hip joint: an electrochemical investigation10.1016/j.jmbbm.2013.08.018 ↗
61. Jacobs JJ, Gilbert JL, Urban RM. Current concepts review - corrosion of metal orthopaedic implants. vol. 80. 1998.10.2106/00004623-199802000-00015 ↗
62. Pyrolytic carbon arthroplasty versus suspensionplasty for trapezial-metacarpal arthritis10.1055/s-0036-1593735 ↗
63. Pyrocarbon hemiarthroplasty for the treatment of shoulder osteoarthritis in young, active patients: survival and risk factors for revision
64. Pyrocarbon small joint arthroplasty of the extremities
65. In vitro comparison of wear characteristics of PyroCarbon and metal on bone: shoulder hemiarthroplasty10.1177/1758573218796837 ↗
66. Pyrolytic carbon arthroplasty versus suspensionplasty for trapezial-metacarpal arthritis10.1055/s-0036-1593735 ↗