journal article·2014-08

Resisting protein adsorption on biodegradable polyester brushes

Xinfang Hu, Christopher B. Gorman

Acta Biomaterialia· Volume 10· Issue 8
Publisher page

Abstract

The protein adsorption and degradation behaviors of poly(lactic acid), poly(glycolic acid) (PGA) and poly(ε-caprolactone) (PCL) brushes and their co-polymer brushes with oligo(ethylene glycol) (OEG) were studied. Both brush structure and relative amount of OEG and polyester were found to be important to the protein resistance of the brushes. A protein-resisting surface can be fabricated either by using OEG as the top layer of a copolymer brush or by increasing the amount of OEG relative to polyester when using a hydroxyl terminated OEG (OEG-OH) and a methoxy terminated OEG (OEG-OMe) mixture as the substrate layer. The degradation of single polyester brushes and their co-polymer brushes using OEG-OH as a substrate layer or using OEG as a top layer was hindered. This phenomenon was rationalized by the inhibition of the proposed back-biting process as the hydroxy end groups of polyester were blocked by OEG molecules. Among these brushes tested, PGA co-polymer brushes using the methoxy/hydroxyl OEG mixture as the substrate layer proved to be both protein-resistant and degradable due to the relatively large amount of OEG moieties and the good biodegradability of PGA.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Polymer Surface Interaction Studies · Hemostasis and retained surgical items

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Ohya, Y., Takahashi, A., Nagahama, K. Biodegradable polymeric assemblies for biomedical materials. In: S. Kunugi, T. Yamaoka, editor. Polymer Nanomedicine, vol. 247, 2012, p. 65–114. ISBN: 0065-3195\n978-3-642-27855-6.10.1007/12_2011_160 ↗
2. Poly(lactic acid) modifications10.1016/j.progpolymsci.2009.12.003 ↗
3. Biodegradable polymers as biomaterials10.1016/j.progpolymsci.2007.05.017 ↗
4. Synthesis of functionalized biodegradable polyesters10.1039/b614342n ↗
5. Properties of lactic acid based polymers and their correlation with composition10.1016/S0079-6700(02)00012-6 ↗
6. Chemical syntheses of biodegradable polymers10.1016/S0079-6700(01)00039-9 ↗
7. The manufacturing techniques of various drug loaded biodegradable poly(lactide-co-glycolide) (PLGA) devices10.1016/S0142-9612(00)00115-0 ↗
8. Synthetic polymer scaffolds for tissue engineering10.1039/b811392k ↗
9. Freier, T. Biopolyesters in tissue engineering applications. In: Werner, C., Eisseeff, J.H., Fischbach, C., Freier, T., Garcia, A.J., Mooney, D.J. et al. editors. Polymers for Regenerative Medicine 2006, p. 1–61. ISBN: 0065-3195.10.1007/12_073 ↗
10. In pursuit of zero: polymer brushes that resist the adsorption of proteins10.1002/adma.200900383 ↗
11. Blood compatibility of surfaces with superlow protein adsorption10.1016/j.biomaterials.2008.07.039 ↗
12. Oligo(ethylene glycol) containing polymer brushes as bioselective surfaces10.1021/la047574s ↗
13. Surface modification using silanated poly(ethylene glycol)s10.1016/S0142-9612(99)00224-0 ↗
14. Antibacterial and antifouling catheter coatings using surface grafted PEG-b-cationic polycarbonate diblock copolymers10.1016/j.biomaterials.2012.06.001 ↗
15. High throughput atmospheric pressure plasma-induced graft polymerization for identifying protein-resistant surfaces10.1016/j.biomaterials.2011.11.001 ↗
16. Mixed poly (ethylene glycol) and oligo (ethylene glycol) layers on gold as nonfouling surfaces created by backfilling10.1116/1.3647506 ↗
17. Blood compatibility of surfaces with superlow protein adsorption10.1016/j.biomaterials.2008.07.039 ↗
18. Impedance and QCM analysis of the protein resistance of self-assembled PEGylated alkanethiol layers on gold10.1016/j.biomaterials.2004.10.038 ↗
19. Protein adsorption on oligo(ethylene glycol)-terminated alkanethiolate self-assembled monolayers: the molecular basis for nonfouling behavior10.1021/jp0473321 ↗
20. Factors that determine the protein resistance of oligoether self-assembled monolayers – internal hydrophilicity, terminal hydrophilicity, and lateral packing density10.1021/ja034820y ↗
21. Ultrasensitive probing of the protein resistance of PEG surfaces by secondary ion mass spectrometry10.1016/S0142-9612(02)00228-4 ↗
22. Reactive coupling of poly(ethylene glycol) on electroactive polyaniline films for reduction in protein adsorption and platelet adhesion10.1016/S0142-9612(01)00184-3 ↗
23. Study of the air–water interfacial properties of biodegradable polyesters and their block copolymers with poly(ethylene glycol)10.1021/la300810q ↗
24. Circulation kinetics and biodistribution of dual-labeled polymersomes with modulated surface charge in tumor-bearing mice: comparison with stealth liposomes10.1016/j.jconrel.2011.07.028 ↗
25. Core−shell molecular bottlebrushes with helical polypeptide backbone: synthesis, characterization, and solution conformations10.1021/ma1025994 ↗
26. Synthesis and self-assembly of amphiphilic semi-brush and dual brush block copolymers in solution and on surfaces10.1039/C0PY00200C ↗
27. Preparation of hairy particles and antifouling films using brush-type amphiphilic block copolymer surfactants in emulsion polymerization10.1021/ma9027257 ↗
28. Evaluation of polymeric micelles from brush polymer with poly(epsilon-caprolactone)-b-poly(ethylene glycol) side chains as drug carrier10.1021/bm900345m ↗
29. Tuning gold nanoparticle-poly(2-hydroxyethyl methacrylate) brush interactions: from reversible swelling to capture and release10.1021/nn800822c ↗
30. Polymerization of oligo(ethylene glycol) (meth)acrylates: toward new generations of smart biocompatible materials10.1002/pola.22706 ↗
31. Effect of PEG conformation and particle size on the cellular uptake efficiency of nanoparticles with the HepG2 cells10.1016/j.jconrel.2006.11.028 ↗
32. Core−shell structure of PLA−PEG nanoparticles used for drug delivery10.1021/la020911h ↗
33. Freeze-drying and lyopreservation of diblock and triblock poly(lactic acid)-poly(ethylene oxide) (PLA-PEO) copolymer nanoparticles10.1081/PDT-100102031 ↗
34. Collective dynamics of polymer brushes10.1021/ma9909051 ↗
35. Interfacial friction and adhesion of polymer brushes10.1021/la201396m ↗
36. Facile synthesis and responsive behavior of PDMS-b-PEG diblock copolymer brushes via photoinitiated “thiol-ene” click reaction10.1002/pola.25985 ↗
37. Effects of temperature and pH on the degradation of poly(lactic acid) brushes10.1021/ma2000948 ↗
38. Poly(lactic acid) brushes grow longer at lower temperatures10.1002/pola.24120 ↗
39. Comparison of the growth and degradation of poly(glycolic acid) and poly(epsilon-caprolactone) brushes10.1002/pola.26885 ↗
40. Principles of protein adsorption
41. Anti-biofouling properties of an amphoteric polymer brush constructed on a glass substrate10.1016/j.colsurfb.2011.07.029 ↗
42. Effect of polyelectrolyte structure on protein-polyelectrolyte coacervates: coacervates of bovine serum albumin with poly(diallyidimethylammonium chloride) versus chitosan10.1021/bm700645t ↗
43. Mixed self-assembled monolayers (SAMs) consisting of methoxy-tri(ethylene glycol)-terminated and alkyl-terminated dimethylchlorosilanes control the non-specific adsorption of proteins at oxidic surfaces10.1016/j.jcis.2005.10.005 ↗