The influence of scaffold fibre architecture on tenocyte tissue production under intermittent dynamic culture
Source abstract
Abstract
Surgical intervention involving grafts is often required to treat ruptured Achilles tendons. Synthetic grafts for this purpose have a number of advantages but have yet to be translated to clinic, due to an inability to reproduce the complex architecture and thus biomechanics of the native collagen fibre structure. This study examined the influence of scaffold fibre architecture in combination with intermittent dynamic culture on the composition of extracellular matrix (ECM) deposited by isolated rabbit tenocytes. Scaffolds were prepared using melt electrowriting having fibre patterns similar to those reported for tendon tissue, with either bi-directionally crimped fibres or unidirectionally crimped with orthogonal linear fibres. The bi-directionally crimped scaffolds were designed such that they had a negative Poisson's ratio (auxetic nature) similar to that reported for the human Achilles tendon (AT). The scaffolds were seeded with rabbit tenocytes, precultured under static conditions for one week, then either dynamically stimulated in intermittent uniaxial tension (4 % strain, 1 Hz, 1 h/day) or maintained in static culture for 2 weeks. Dynamic intermittent stimulation promoted increased cell proliferation and ECM synthesis on both scaffold architectures in comparison to static controls. However, the tenocytes cultured on the bi-directional, auxetic scaffolds produced more total collagen and less sulfated glycosaminoglycans (sGAG) per cell with an overall collagen:sGAG ratio within the range reported for healthy human tissue at 10:1 in contrast to the 4:1 ratio of the ECM deposited on the scaffolds with the unidirectional crimped, non-auxetic fibre pattern. The increase in collagen content on the auxetic scaffolds was also reflected in a higher tensile modulus. These findings demonstrate the impact of fibre crimp unfolding on tenocyte response to mechanical loading and highlight the benefits of replicating the complexity of the AT fibre architecture in developing grafts for surgical repair of ruptured ATs. STATEMENT OF SIGNIFICANCE: Synthetic grafts for Achilles tendon (AT) repair have predominantly used a uniaxial crimped fibre architecture. However, the collagen fibre architecture of the AT is more complex, having multidimensional fibre crimping. This crimp pattern is considered responsible for the auxetic nature of the human AT, and tenocyte response to scaffolds with multidimensional fibre architectures has not been explored to date. Our findings demonstrate the importance of replicating the multidimensional nature of fibre architecture and suggest the benefits of incorporating an auxetic response in graft designs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tendon Structure and Treatment · Cellular Mechanics and Interactions · Skin and Cellular Biology Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. Tendon biomechanics and mechanobiology-a minireview of basic concepts and recent advancements10.1016/j.jht.2011.07.004 ↗
2. The seasonal variation of Achilles tendon ruptures in Vancouver, Canada: a retrospective study10.1136/bmjopen-2013-004320 ↗
3. Mechanical and biochemical stimulation of 3d multilayered scaffolds for tendon tissue engineering10.1021/acsbiomaterials.8b01647 ↗
4. Tendon injury and repair - A perspective on the basic mechanisms of tendon disease and future clinical therapy10.1016/j.actbio.2017.08.032 ↗
5. The clinical strategies for tendon repair with biomaterials: a review on rotator cuff and Achilles tendons10.1002/jbm.b.34525 ↗
6. Tendon and ligament healing and current approaches to tendon and ligament regeneration10.1002/jor.24475 ↗
7. Engineering the tenogenic niche in vitro with microenvironmental tools
8. Cyclic uniaxial tensile strain enhances the mechanical properties of engineered, scaffold-free tendon fibers10.1089/ten.tea.2018.0028 ↗
9. Riggin · 2015 · 149
10. Achilles tendon ruptures10.1007/s12178-013-9185-8 ↗
11. Mechanobiology of tendon10.1016/j.jbiomech.2005.05.011 ↗
12. Structure of the tendon connective tissue10.1034/j.1600-0838.2000.010006312.x ↗
13. Collagen structure of tendon relates to function10.1100/tsw.2007.92 ↗
14. The 3D structure of crimps in the rat Achilles tendon10.1016/j.matbio.2005.07.006 ↗
15. Collagen fibres of the spontaneously ruptured human tendons display decreased thickness and crimp angle10.1016/j.orthres.2004.04.003 ↗
16. Negative Poisson’s ratios in tendons: an unexpected mechanical response10.1016/j.actbio.2015.06.018 ↗
17. Dynamic loading and tendon healing affect multiscale tendon properties and ECM stress transmission10.1038/s41598-018-29060-y ↗
18. Dynamic load model systems of tendon inflammation and mechanobiology10.3389/fbioe.2022.896336 ↗
19. A crimp-like microarchitecture improves tissue production in fibrous ligament scaffolds in response to mechanical stimuli10.1016/j.actbio.2012.06.016 ↗
20. Electrospun microcrimped fibers with nonlinear mechanical properties enhance ligament fibroblast phenotype
21. Development and maintenance of tendons and ligaments10.1242/dev.186916 ↗
22. Synergistic effects of mechanical stimulation and crimped topography to stimulate natural collagen development for tendon engineering10.1016/j.actbio.2022.04.026 ↗
23. Thermodynamics of fusion of poly-β-propiolactone and poly-ϵ-caprolactone. Comparative analysis of the melting of aliphatic polylactone and polyester chains10.1016/0014-3057(72)90109-7 ↗
24. Falla · 2024
25. Scaffolds and cells for tissue regeneration: different scaffold pore sizes-different cell effects10.1007/s10616-015-9895-4 ↗
26. Effect of pore size on cell behavior using melt electrowritten scaffolds10.3389/fbioe.2021.629270 ↗
27. A systematic approach to identify cellular auxetic materials
28. A review on auxetic structures and polymeric materials
29. Melt electrospinning of nanofibers from medical-grade poly (ε-Caprolactone) with a modified nozzle10.1002/smll.202003471 ↗
30. Melt electrowriting below the critical translation speed to fabricate crimped elastomer scaffolds with non-linear extension behaviour mimicking that of ligaments and tendons10.1016/j.actbio.2018.03.023 ↗
31. Additive manufacturing of a photo-cross-linkable polymer via direct melt electrospinning writing for producing high strength structures10.1021/acs.biomac.5b01316 ↗
32. Printomics: the high-throughput analysis of printing parameters applied to melt electrowriting10.1088/1758-5090/aafc41 ↗
33. Programmable melt electrowriting to engineer soft connective tissues with prescribed, biomimetic biaxial mechanical properties
34. Melt electrospinning writing of poly-hydroxymethylglycolide-co-ε-caprolactone-based scaffolds for cardiac tissue engineering
35. Rabbit Achilles tendon full transection model–wound healing, adhesion formation and biomechanics at 3, 6 and 12 weeks post-surgery10.1242/bio.020644 ↗
36. Regeneration of Achilles’ tendon: the role of dynamic stimulation for enhanced cell proliferation and mechanical properties10.1163/092050609X12471222313524 ↗
37. Culture and characterization of juvenile rabbit tenocytes10.1023/B:CBTO.0000010395.51944.2a ↗
38. Fibronectin functionalized electrospun fibers by using benign solvents: best way to achieve effective functionalization10.3389/fbioe.2019.00068 ↗
39. Polymers for melt electrowriting
40. Mechanical and microstructural properties of polycaprolactone scaffolds with 1-D, 2-D, and 3-D orthogonally oriented porous architectures produced by selective laser sintering10.1016/j.actbio.2010.02.002 ↗
41. Bulk mechanical properties of thermoplastic poly-e-caprolactone
42. Fascicle-scale loading and failure behavior of the Achilles tendon10.1115/1.4000696 ↗
43. Specialization of tendon mechanical properties results from interfascicular differences10.1098/rsif.2012.0362 ↗
44. Viscoelastic behaviour and flow instabilities of biodegradable poly (ε-caprolactone) polyesters10.1007/s00397-011-0586-6 ↗
45. On the viscosity-temperature behavior of polymer melts10.1007/BF00396562 ↗
46. Direct writing by way of melt electrospinning10.1002/adma.201103482 ↗
47. Accurate prediction of melt electrowritten laydown patterns from simple geometrical considerations10.1002/admt.202000772 ↗
48. Designing outside the box: unlocking the geometric freedom of melt electrowriting using microscale layer shifting10.1002/adma.202001874 ↗
49. Optimization of flexor tendon tissue engineering with a cyclic strain bioreactor10.1016/j.jhsa.2008.04.019 ↗
50. Effects of uniaxial stretching on tenocyte migration behaviour10.1515/cdbme-2018-0076 ↗
51. Rouxhet · J. Biomater. Sci. Polym. Ed. · 1998 · 9 · 127910.1163/156856298X00398 ↗
52. Surface chemistry modulates fibronectin conformation and directs integrin binding and specificity to control cell adhesion10.1002/jbm.a.10537 ↗
53. The role of mechanobiology in tendon healing10.1016/j.jse.2011.11.002 ↗
54. Biology and physiology of tendon healing10.1016/j.jbspin.2024.105696 ↗
55. β1 integrin, ILK and mTOR regulate collagen synthesis in mechanically loaded tendon cells10.1038/s41598-020-69267-6 ↗
56. Self-crimping, biodegradable, electrospun polymer microfibers10.1021/bm101078c ↗
57. Electrospun poly(L-lactide-co-acryloyl carbonate) fiber scaffolds with a mechanically stable crimp structure for ligament tissue engineering10.1021/bm401813j ↗
58. The effect of melt electrospun writing fiber orientation onto cellular organization and mechanical properties for application in Anterior Cruciate Ligament tissue engineering10.1016/j.jmbbm.2020.103631 ↗
59. The role of mechanical loading in tendon development, maintenance, injury, and repair10.2106/JBJS.L.01004 ↗
60. Mechanobiology in tendon, ligament, and skeletal muscle tissue engineering10.1115/1.4050035 ↗
61. Intermittent cyclic stretch of engineered ligaments drives hierarchical collagen fiber maturation in a dose-and organizational-dependent manner10.1016/j.actbio.2024.07.025 ↗
62. Achilles tendinosis: changes in biochemical composition and collagen turnover rate10.1177/0363546507301885 ↗
63. Achilles tendon compositional and structural properties are altered after unloading by botox10.1038/s41598-017-13107-7 ↗
64. Tendon biomechanics and mechanobiology—A minireview of basic concepts and recent advancements10.1016/j.jht.2011.07.004 ↗
65. Species variations in tenocytes’ response to inflammation require careful selection of animal models for tendon research10.1038/s41598-021-91914-9 ↗
66. In vitro loading models for tendon mechanobiology10.1002/jor.23752 ↗
67. The role of material structure and mechanical properties in cell-matrix interactions10.1039/c3tb21604g ↗
68. Mechanics and functional consequences of nuclear deformations10.1038/s41580-022-00480-z ↗
69. Tendon decellularized matrix modified fibrous scaffolds with porous and crimped microstructure for Tendon regeneration10.1021/acsabm.4c00565 ↗