Self-joining of zirconia/hydroxyapatite composites using plastic deformation process
Source abstract
Abstract
A plastic deformation process was demonstrated to self-join 3 mol.% yttria partially stabilized zirconia (3Y-TZP)/hydroxyapatite (HA) composites. The 3Y-TZP/40 vol.% HA composites were fabricated by conventional ceramic processing by cold pressing premixed 3Y-TZP and HA powders into pellets. Densification ( approximately 90%) of composites was achieved by sintering composite powder compacts at 1450 degrees C for 5h. Optimum self-joining of 3Y-TZP/40 vol.% HA composites was obtained at 1300 degrees C for a strain rate of 5 x 10(-5)/s. The flow stress during joining was 40 MPa. Microstructural and mechanical characterizations of the joint interface demonstrated that there were no discernible differences between the joint and the composite material away from the interface.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Advanced materials and composites · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Bioceramics: from concept to clinic10.1111/j.1151-2916.1991.tb07132.x ↗
2. Hench · 1993
3. Review: some physiochemical aspects of hydroxyapatite10.1007/BF00355120 ↗
4. Calcium phosphate ceramics as bone substitutes
5. Porous hydroxyapatite as a bonegraft substitute in alveolar ridge augumentation: a histometric study10.1016/S0901-5027(87)80059-0 ↗
6. Surface activity of bioglass, alumina and titanium oxide in a living environment
7. Hydroxyapatite-reinforced polyethylene as an analogous material for bone replacement10.1111/j.1749-6632.1988.tb38510.x ↗
8. Microstructural and mechanical study of zirconio-hydroxyapatite (ZH) composite ceramics for biomedical applications10.1016/S0266-3538(00)00222-0 ↗
9. Joining of Y-TZP parts10.1016/0956-716X(95)00206-B ↗
10. Joining of yttria-tetragonal stabilized zirconia polycrystals using nanocrystals10.1016/S1359-6462(99)00190-6 ↗
11. Joining alumina/zirconia ceramics10.1016/S0921-5093(02)00212-5 ↗
12. Joining of advanced materials by plastic deformation10.1002/9780470291184.ch15 ↗
13. Diffusion bonding of ceramics
14. Superplasticity of hot isostatically pressed hydroxyapatite10.1111/j.1151-2916.1990.tb06537.x ↗
15. Plastic deformation of hydroxyapatites and its application to joining10.1111/j.1744-7402.2005.02024.x ↗
16. Superplasticity of yttria-stabilized tetragonal ZrO2 polycrystals10.1111/j.1551-2916.1986.tb00026.x ↗
17. Underwood · 1970
18. Van Wazer · 1958 · Vol. 1 · 527
19. Preparation and properties of sintered hydroxylapatite10.1016/0390-5519(78)90122-9 ↗
20. Deformation and grain growth of low-temperature-sintered high-purity alumina10.1111/j.1151-2916.1990.tb06489.x ↗
21. Superplasticity of yttria-stabilized tetragonal zirconia10.1111/j.1551-2916.1986.tb00026.x ↗
22. Superplasticity in advanced materials10.1016/0927-796X(93)90009-R ↗
23. The characteristics of superplastic-like flow in ceramics
24. Growth of interface defects and its effect on crack deflection and toughening criteria10.1016/S1359-6454(96)00068-7 ↗
25. Hydroxyapatite-doped zirconia for preparation of biomedical composites ceramics10.1016/j.ssi.2004.01.054 ↗
26. Bioceramic bone graft substitutes: influence of porosity and chemistry10.1111/j.1744-7402.2005.02020.x ↗
27. Phenotypic expression of bone-related genes in osteoblasts grown on calcium phosphate ceramics with different phase compositions10.1016/j.biomaterials.2003.09.035 ↗
28. Control of phase composition in hydroxyapatite/tetracalcium phosphate biphasic thin coatings for biomedical applications10.1007/s10856-005-4430-3 ↗
29. Resorbable bioceramics based on stabilized calcium phosphates. Part I: rational design, sample preparation and material characterization10.1016/S0142-9612(99)00086-1 ↗
30. Joining of ceramics of different biofunction by hot isostatic pressing10.1111/j.1151-2916.1993.tb04002.x ↗
31. Fabrication of structure-controlled hydroxyapatite/zirconia composite10.1016/j.jeurceramsoc.2005.07.047 ↗
32. The effect of zirconia reinforcing agents on the microstructure and mechanical properties of hydroxyapatite-based nanocomposites10.1111/j.1551-2916.2005.00636.x ↗
33. Biological response of neonatal rat calvarial osteoblasts on plasma-sprayed HA/ ZrO2 composite coating10.1023/A:1014010901423 ↗
34. Comparison of plasma-sprayed hydroxyapatite coatings and zirconia-reinforced hydroxyapatite composite coatings: in vivo study10.1002/jbm.a.30190 ↗
35. Characterization of porous β-tricalcium phosphate films formed on alumina ceramics by spray-pyrolysis technique and their in vitro evaluations using osteoblasts10.2109/jcersj.113.245 ↗
36. Calcium phosphate and glass phosphate coatings on zirconia for enhanced biocompatability10.1016/j.biomaterials.2003.10.094 ↗
37. Mechanical and biological of calcium phosphate coatings on porous bone scaffold10.1111/j.1151-2916.2004.tb06371.x ↗