Mimicking nature: Self-strengthening properties in a dental adhesive
Source abstract
Abstract
Chemical and enzymatic hydrolysis provoke a cascade of events that undermine methacrylate-based adhesives and the bond formed at the tooth/composite interface. Infiltration of noxious agents, e.g. enzymes, bacteria, and so forth, into the spaces created by the defective bond will ultimately lead to failure of the composite restoration. This paper reports a novel, synthetic resin that provides enhanced hydrolytic stability as a result of intrinsic reinforcement of the polymer network. The behavior of this novel resin, which contains γ-methacryloxyproyl trimethoxysilane (MPS) as its Si-based compound, is reminiscent of self-strengthening properties found in nature. The efforts in this paper are focused on two essential aspects: the visible-light irradiation induced (photoacid-induced) sol-gel reaction and the mechanism leading to intrinsic self-strengthening. The FTIR band at 2840cm(-1) corresponding to CH3 symmetric stretch in -Si-O-CH3 was used to evaluate the sol-gel reaction. Results from the real-time FTIR indicated that the newly developed resin showed a limited sol-gel reaction (<5%) during visible-light irradiation, but after 48h dark storage, the reaction was over 65%. The condensation of methoxysilane mainly occurred under wet conditions. The storage moduli and glass transition temperature of the copolymers increased in wet conditions with the increasing MPS content. The cumulative amounts of leached species decreased significantly when the MPS-containing adhesive was used. The results suggest that the polymethacrylate-based network, which formed first as a result of free radical initiated polymerization, retarded the photoacid-induced sol-gel reaction. The sol-gel reaction provided a persistent, intrinsic reinforcement of the polymer network in both neutral and acidic conditions. This behavior led to enhanced mechanical properties of the dental adhesives under conditions that simulate the wet, oral environment. Statement of significance A self-strengthening dental adhesive system was developed through a dual curing process, which involves the free radical photopolymerization followed by slow hydrolysis and condensation (photoacid-induced sol-gel reaction) of alkoxylsilane groups. The concept of "living" photoacid-induced sol-gel reaction with visible-light irradiation was confirmed in the polymer. The sol-gel reaction was retarded by the polymethacrylate network, which was generated first; the network extended the life and retained the activity of silanol groups. The self-strengthening behavior was evaluated by monitoring the mechanical properties of the hybrid copolymers under wet conditions. The present research demonstrates the sol-gel reaction in highly crosslinked network as a potentially powerful strategy to prolong the functional lifetime of engineered biomaterials in wet environments.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Photopolymerization techniques and applications · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Prolonged curing time reduces the effects of simulated pulpal pressure on the bond strength of one-step self-etch adhesives10.2341/12-180-L ↗
2. Hydrolytic stability of self-etching adhesive systems
3. Hygroscopic and hydrolytic effects in dental polymer networks10.1016/j.dental.2005.05.005 ↗
4. Strategies to prevent hydrolytic degradation of the hybrid layer-A review10.1016/j.dental.2013.07.016 ↗
5. Influence of pH environment on polymer based dental material properties10.1016/j.jdent.2004.08.004 ↗
6. Adhesive/dentin interface: the weak link in the composite restoration10.1007/s10439-010-9969-6 ↗
7. Enzymatic biodegradation of HEMA/BisGMA adhesives formulated with different water content10.1002/jbm.b.31095 ↗
8. Enzyme-catalyzed hydrolysis of dentin adhesives containing a new urethane-based trimethacrylate monomer10.1002/jbm.b.31430 ↗
9. Salivary esterase activity and its association with the biodegradation of dental composites10.1177/154405910408300105 ↗
10. Degradation of methacrylate monomers in human saliva10.4012/dmj.25.241 ↗
11. The stability of methacrylate biomaterials when enzyme challenged: kinetic and systematic evaluations10.1002/1097-4636(20011215)57:4<522::AID-JBM1198>3.0.CO;2-9 ↗
12. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins10.1016/S0142-9612(02)00380-0 ↗
13. Water sorption and solubility of experimental dental composites
14. Effect of photoinitiators on the in vitro performance of a dentin adhesive exposed to simulated oral environment10.1016/j.dental.2008.09.011 ↗
15. New polymer-chemical developments in clinical dental polymer materials: enamel–dentin adhesives and restorative composites10.1002/pola.26260 ↗
16. Prolonged exposure times of one-step self-etch adhesives on adhesive properties and durability of dentine bonds10.1016/j.jdent.2012.09.003 ↗
17. A physico-chemical explanation of the post-polymerization shrinkage in dental resins10.1016/j.dental.2005.04.030 ↗
18. Effect of chemical structure on degree of conversion in light-cured dimethacrylate-based dental resins10.1016/S0142-9612(01)00308-8 ↗
19. Zinc-inhibited MMP-mediated collagen degradation after different dentine demineralization procedures10.1159/000337315 ↗
20. MMP-2 assay within the hybrid layer created by a two-step etch-and-rinse adhesive: Biochemical and immunohistochemical analysis10.1016/j.jdent.2011.04.004 ↗
21. The requirement of zinc and calcium ions for functional MMP activity in demineralized dentin matrices10.1016/j.dental.2010.07.006 ↗
22. The critical barrier to progress in dentine bonding with the etch-and-rinse technique10.1016/j.jdent.2010.12.009 ↗
23. Mechanical properties and characteristics of developmental copolymers incorporating catechin or chlorhexidine10.1016/j.dental.2012.03.003 ↗
24. Direct preparation of silica hollow spheres in a water in oil emulsion system: The effect of pH and viscosity10.1016/j.jnoncrysol.2006.02.045 ↗
25. Hydrolysis and condensation of silicates – effects on structure10.1016/0022-3093(88)90005-1 ↗
26. Interfacial fabrication of silica hollow particles in a reverse emulsion system10.1246/cl.2005.1314 ↗
27. The use of chairside silica coating for different dental applications: a clinical report10.1067/mpr.2002.124365 ↗
28. Insights on ceramics as dental materials. Part I: ceramic material types in dentistry10.1007/s12633-011-9078-7 ↗
29. Should silane coupling agents be used when bonding brackets to composite restorations? An in vitro study10.1093/ejo/cjn106 ↗
30. Aspects of silane coupling agents and surface conditioning in dentistry: an overview10.1016/j.dental.2012.02.009 ↗
31. F.J. Fox, R.W. Noren, G.E. Krankkala, Catalyst for condensation of hydrolyzable silanes and storage stable compositions thereof. United States Patent 4101513, Minnesota Mining and Manufacturing Company (St. Paul, MN) USA, 1978.
32. The discovery and development of onium salt cationic photoinitiators10.1002/(SICI)1099-0518(19991201)37:23<4241::AID-POLA1>3.0.CO;2-R ↗
33. Photoacid catalyzed sol–gel process10.1039/b508212a ↗
34. Preparation and characterization of hybrid nanocomposite coatings by photopolymerization and sol–gel process10.1016/j.polymer.2005.09.062 ↗
35. Hybrid nanocomposites containing silica and PEO segments: preparation through dual-curing process and characterization10.1016/j.polymer.2005.02.045 ↗
36. Concomitant Organic–inorganic UV-curing catalyzed by photoacids10.1021/ma801017k ↗
37. Tuning and transcription of the supramolecular organization of a fluorescent silsesquioxane precursor into silica-based materials through direct photochemical hydrolysis-polycondensation and micropatterning10.1002/adfm.200801387 ↗
38. Synthesis and evaluation of novel dental monomer with branched carboxyl acid group10.1002/jbm.b.33126 ↗
39. Development of methacrylate/silorane hybrid monomer system: relationship between photopolymerization behavior and dynamic mechanical properties
40. Synthesis and evaluation of novel siloxane-methacrylate monomers used as dentin adhesives10.1016/j.dental.2014.06.004 ↗
41. Effect of photoinitiator system and water content on dynamic mechanical properties of a light-cured bisGMA/HEMA dental resin10.1002/jbm.a.32617 ↗
42. Dynamic mechanical analysis and esterase degradation of dentin adhesives containing a branched methacrylate10.1002/jbm.b.31374 ↗
43. Macroporous organosilica films via a template-free photoinduced sol–gel process10.1039/c0jm00791a ↗
44. Brinker · 1990
45. Insights into photoinduced sol–gel polymerization: an in situ infrared spectroscopy study10.1021/jp212386e ↗
46. Radical-promoted visible light photoinitiated cationic polymerization of epoxides10.1080/10601320902797707 ↗
47. Visible light initiated free radical promoted cationic polymerization using acylgermane based photoinitiator in the presence of onium salts10.1021/ma801208n ↗
48. A visible-light initiating system for free-radical promoted cationic polymerization10.1021/ma00092a001 ↗
49. Bridged polysilsesquioxane films via photoinduced sol–gel chemistry10.1039/b9nj00763f ↗
50. Autoacceleration in free-radical polymerization10.1103/PhysRevLett.73.1723 ↗
51. Design and synthesis of photoacid generating systems10.2494/photopolymer.21.493 ↗
52. Polymerization of hybrid sol–gel materials catalyzed by photoacids generation10.2494/photopolymer.23.129 ↗
53. Effect of comonomer concentration and functionality on photopolymerization rates, mechanical properties and heterogeneity of the polymer10.1002/(SICI)1521-3935(19980601)199:6<1043::AID-MACP1043>3.0.CO;2-Z ↗
54. The effect of resin formulation on the degree of conversion and mechanical-properties of dental restorative resins10.1002/jbm.820200111 ↗
55. Relationship of solvent to the photopolymerization process, properties, and structure in model dentin adhesives10.1002/jbm.a.30890 ↗
56. Viscoelastic and fatigue properties of model methacrylate-based dentin adhesives10.1002/jbm.b.31712 ↗
57. Viscoelastic properties of collagen-adhesive composites under water-saturated and dry conditions10.1002/jbm.a.35204 ↗
58. Effect of soaking solution with different pH on the solubility of cements
59. The effect of an acidic food-simulating environment on the shear bond strength of self-ligating brackets with different base designs10.1155/2014/689536 ↗
60. Influence of organic acids present in the oral biofilm on the microtensile bond strength of adhesive systems to human dentin10.1002/jbm.b.32506 ↗
61. Modifying nanoscale silica with itself: a method to control surface properties of silica aerogels independently of bulk structure10.1016/S0022-3093(01)00428-8 ↗
62. Mechanical properties of substances of high molecular weight. 19. the temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
63. Aklonis · 2005
64. Bioactive poly(2-hydroxyethylmethacrylate)/silica gel hybrid nanocomposites prepared by sol–gel process10.1002/jbm.b.30993 ↗
65. Viscosity, particle size distribution, and structural investigation of tetramethyloxysilane/2-hydroxyethyI methacrylate sols during the sol–gel process with acid and base catalysts10.1002/polb.20224 ↗