journal article·2012-05

Osteoclast resorption of thermal spray hydoxyapatite coatings is influenced by surface topography

Karlis A. Gross, Dirk Muller, Helen Lucas, David R. Haynes

Acta Biomaterialia· Volume 8· Issue 5
Publisher page

Abstract

Coating characteristics such as composition, crystallite features and topography collectively impact the cell response. The influence from splats has not yet been assessed for hydroxyapatite (HAp) thermal spray coatings. The objective of this work is to (a) survey the topography on commercial implants, (b) ascertain topography formation from single splats, and (c) determine the osteoclast resorption pattern on a topographically refined coating compared to dentine. Coatings on dental implants, an orthopedic screw, a femoral stem and a knee implant were studied for reference. The effects of substrate pre-heat, roughness, spray distance and particle size on the coating roughness and topography were studied. Human-derived osteoclasts were placed on a coating with refined topography and compared to dentine, a polished coating and polished sintered HAp. A pre-heat of at least 200°C on titanium was required to form rounded splats. The greatest influence on coating roughness and topography arose from particle size. A 2-fold increase in the mean particle size from 30 to 72 μm produced a significant difference (P<0.001) in roughness from 4.8 and 9.7 μm. A model is shown to illustrate topography formation, nanostructure evolution on single splats, and the topography as seen in commercial implants. Osteoclasts showed a clear preference for activity on coatings with refined topography. A one-way ANOVA test revealed a significantly greater pit depth (P=0.022) for dentine (14 μm) compared to the as-sprayed and polished coating (5 μm). Coatings with topography display a similar number of resorption pits with dentine, but a 10-fold greater number than polished coatings, emphasizing the importance of flattened droplet topography on implant surfaces.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Dental materials and restorations · Dental Implant Techniques and Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. In vitro effects on MG63 osteoblast-like cells following contact with two roughness-differing fluorohydroxyapatite-coated titanium alloys10.1016/S0142-9612(02)00098-4 ↗
2. Gross KA. Surface modification of prostheses [Masters thesis]. Melbourne, Australia: Monash University; 1991.
3. Microstructure and mechanical properties of plasma sprayed HA/YSZ/T-6Al-4V composite coatings10.1016/j.biomaterials.2003.10.089 ↗
4. Design of novel plasma sprayed hydroxyapatite-bone coat bioceramic systems10.1361/105996399770350304 ↗
5. Laser-Raman and nuclear magnetic resonance (NMR) studies on plasma-sprayed hydroxyapatite: influence of bioinert bond coats on phase composition and resorption kinetics in simulated body fluid10.1002/mawe.200300705 ↗
6. Bouyer E, Gitzhofer, F, Boulos, MI. The suspension plasma spraying of bioceramics by induction plasma. J Met 1997;49:58–62.10.1007/BF02915483 ↗
7. In vivo comparison of the osseointegration of vacuum plasma sprayed titanium- and hydroxyapatite-coated implants10.1002/jbm.a.10508 ↗
8. Kinetics of hydrothermal crystallization under saturated steam pressure and the self-healing effect by nanocrystallite for hydroxyapatite coatings10.1016/j.actbio.2009.03.014 ↗
9. Relative contribution of chemistry and topography to the osseointegration of hydroxyapatite coatings10.1097/00003086-200212000-00004 ↗
10. Effect of surface roughness of hydroxyapatite on human bone marow cell adhesion, proliferation, differentiation and detachment strength10.1016/S0142-9612(00)00174-5 ↗
11. Structural influence from calcium phosphate coatings and its possible effect on enhanced bone integration10.1080/00016350903188325 ↗
12. Plasma sprayed coatings of hydroxyapatite10.1002/jbm.820211203 ↗
13. Sintered hydroxyfluorapatite. I. Sintering ability of precipitated solid solution powders10.1016/S0142-9612(03)00565-9 ↗
14. The correlation of RANK, RANKL and TNF alpha expression with bone loss volume and polyethylene waer debris around him implants10.1016/j.biomaterials.2006.05.054 ↗
15. Resorption of sintered synthetic hydroxyapatite by osteoclasts in vitro10.1016/0142-9612(93)90216-O ↗
16. Topographical control of cells10.1016/S0142-9612(97)00144-0 ↗
17. Histologic comparison of a thermal dual-etched implant surface to machined, TPS, and HA surfaces: bone contact in vivo in rabbits
18. Effect of micrometer-scale roughness on the surface of Ti6Al4V pedicle screws in vitro and in vivo10.2106/JBJS.G.00499 ↗
19. Nanoindentation reveals mechanical properties within thermally sprayed hydroxyapatite coatings10.1016/j.surfcoat.2008.12.025 ↗
20. Effect of surface-roughness of hydroxyapatite-coated titanium on the bone-implant interface shear-strength10.1016/0142-9612(94)90241-0 ↗
21. Surface microtopography design and manufacturing through topography descriptors: an application to prosthetic implant surfaces10.1016/j.cad.2005.02.007 ↗
22. In vitro behavior of HVOF sprayed calcium phosphate splats and coatings10.1016/S0142-9612(02)00404-0 ↗
23. Evaluation of commercial implants with nanoindentation defines future development needs for hydroxyapatite coatings10.1002/jbm.b.31537 ↗
24. Characterisation and wear performance of plasma sprayed WC–Co coatings10.1179/mst.1989.5.4.382 ↗
25. Thermal sprayed hydroxyapatite splats: nanostructures, pore formation mechanisms and TEM characterization10.1016/j.biomaterials.2003.10.051 ↗
26. Numerical analysis of partially molten splat during thermal spray process using the finite element method10.1016/j.apsusc.2009.12.158 ↗
27. Sampath S, Jiang X. Splat formation and microstructure development during plasma spraying: deposition temperature effects. Mat Sci Eng A 2004;3-4-306:144–50.10.1016/S0921-5093(00)01464-7 ↗
28. Knowledge concerning splat formation: an invited review10.1361/10599630419670 ↗
29. Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings10.1361/105996303770348249 ↗
30. Fukumoto M, Hayashi H, Yokoyama T. Relationship between particle’s splat pattern and coating adhesive strength of HVOF sprayed Cu-alloy. J Jpn Therm Spray Soc 1995;32–33:149–56 [in Japanese].
31. Phase transformation of plasma-sprayed hydroxyapatite coating with preferred crystalline orientation10.1016/j.biomaterials.2007.03.008 ↗
32. Identification and mapping of the amorphous phase in plasma sprayed hydroxyapatite coatings using scanning cathodoluminescence microscopy
33. Variability of hydroxyapatite coated dental implants
34. Analysis of retrieved hydroxyapatite-coated hip prostheses10.1361/10599630418112 ↗
35. Direct morphological comparison of vacuum plasma sprayed and detonation gun sprayed hydroxyapatite coatings for orthopaedic applications10.1016/S0142-9612(98)00166-5 ↗
36. Effect of glass phase on the dissolution of hydroxyapatite10.1166/jnn.2008.D246 ↗
37. AFM analysis of anisotropic dissolution in dense hydroxyapatite10.1016/j.ultramic.2008.04.091 ↗
38. Nanoscale variation in surface charge of synthetic hydroxyapatite detected by chemicallly and spatially specific high-resolution force spectroscopy10.1016/j.biomaterials.2004.02.053 ↗
39. Dissolution behaviour of sintered and thermally sprayed hydroxyfluorapatites
40. Characterization and dissolution of functionalized amorphous calcium phosphate biolayers using single-splat technology10.1016/j.actbio.2011.01.020 ↗
41. Characterization of surface biocompatibility of crystallographically aligned hydroxyapatite fabricated using magnetic field10.2320/matertrans.MI200712 ↗
42. Surface nanocrystallization of hydroxyapatite coating10.1016/j.actbio.2008.05.016 ↗
43. Protein adsorption on highly (001) oriented hydroxyapatite coating using rf-plasma spraying
44. Pretreatment of bone with osteoclasts affects phenotypic expression of osteoblast-like cells10.1016/S0736-0266(02)00261-9 ↗
45. Effects of surface topography on cell behaviour
46. Behaviour of osteoclasts in vitro: contact behaviour with osteoblast-like cells and networking of osteoclasts for 3D orientation