journal article·2014-06

Biodegradable poly(ester urethane) urea scaffolds for tissue engineering: Interaction with osteoblast-like MG-63 cells

Joanna Podporska-Carroll, Josephine W.Y. Ip, Sylwester Gogolewski

Acta Biomaterialia· Volume 10· Issue 6
Publisher page

Abstract

Porous three-dimensional scaffolds with potential for application as cancellous bone graft substitutes were prepared from aliphatic segmented poly(ester urethane) urea using the phase-inverse technique. Proton nuclear magnetic resonance, size-exclusion chromatography, electron spectroscopy for chemical analysis, secondary ion mass spectrometry, infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, computed tomography and mechanical tests were carried out, to characterize the scaffolds' physicochemical properties. Human osteosarcoma MG-63 cells were seeded into the scaffolds for 1, 2, 3 and 4weeks to evaluate their potential to support attachment, growth and proliferation of osteogenic cells. The scaffold-cell interaction was assessed by analysis of DNA content, total protein amount, alkaline phosphatase activity and WST-1 assay. The scaffolds supported cell attachment, growth and proliferation over the whole culture period of 4weeks (DNA, total protein amount). There was, however, a reduction in the WST-1 assay values at 4weeks, which might suggest a reduction in the rate of cell proliferation at this time.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · biodegradable polymer synthesis and properties · Electrospun Nanofibers in Biomedical Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Gogolewski S, Rahn B, Wieling R. Bone regeneration in critical-size segmental defects in the tibiae using bioresorbable polymeric bone substitut. In: Abstracts. Orthopaedic Trauma Association 17th Annual Meeting, San Diego, CA; 2001. p. 218–19.
2. Clinical application of resorbable polymers in guided bone regeneration10.1002/masy.200750721 ↗
3. Synthesis and characterization of biodegradable poly(ε-caprolactone urethanes). The effect of the polyol molecular weight, catalyst and the chain extender on the molecular and physical characteristics10.1002/pola.10096 ↗
4. Gorna K, Gogolewski S. Novel biodegradable polyurethanes for medical applications. In: Agrawal CM, Parr JE, Lin ST, editors. Synthetic bioresorbable polymers for implants, ASTM STP 1396, West Conshohocken; PA: ASTM; 2000. p. 39–56.10.1520/STP15299S ↗
5. In vitro degradation of novel medical biodegradable aliphatic polyurethanes based on ε-caprolactone and Pluronics® with various hydrophilicities10.1016/S0141-3910(01)00210-5 ↗
6. Biodegradable polyurethanes for implants. II. In vitro degradation and calcification of materials from poly(ε-caprolactone)–poly(ethylene oxide) diols and various chain extenders10.1002/jbm.10100 ↗
7. Preparation, degradation and calcification of biodegradable polyurethane foams for bone graft substitutes10.1002/jbm.a.10148 ↗
8. Gogolewski S, Gorna K, Wieling R. Biodegradable polyurethane cancellous bone graft substitutes in the treatment of critical-size segmental diaphyseal defects in the sheep tibiae. In: Abstracts, 49th annual meeting orthopaedic research society, New Orleans, LA, 2003; p. 464.
9. Porous biodegradable polyurethane scaffolds for tissue repair and regeneration10.1002/jbm.a.30708 ↗
10. Regeneration of bicortical defects in the ilium of estrogen deficient sheep using new biodegradable polyurethane cancellous bone graft substitutes. A pilot study10.1002/jbm.a.30669 ↗
11. Biodegradable polyurethane cancellous bone graft substitutes in the treatment of iliac crest defects10.1002/jbm.a.30834 ↗
12. Osteogenesis of osteoblast seeded polyurethane–hydroxyapatite scaffolds in nude mice10.1002/masy.200750713 ↗
13. Interaction of sheep bone marrow stromal cells with biodegradable polyurethane bone substitutes10.1002/masy.200750723 ↗
14. Structure–property relations and cytotoxicity of isosorbide-based biodegradable polyurethane scaffolds for tissue repair and regeneration10.1002/jbm.a.31481 ↗
15. Degradable vascular prosthesis from segmented polyurethanes10.1007/BF01410635 ↗
16. Polyurethane vascular prosthesis in pigs10.1007/BF01418452 ↗
17. Long-term patency of regenerated neoaortic wall following the implant of a fully biodegradable polyurethane prosthesis: experimental lipid diet model in pigs10.1016/S0890-5096(07)60031-4 ↗
18. Prevention of platelet aggregation by dietary polyunsaturated fatty acids in the biodegradable polyurethane vascular prosthesis: an experimental model in pigs
19. Polyurethane microporous membranes as pericardial substitutes10.1007/BF01412399 ↗
20. Implantations chroniques de membranes et prothèses en polyurethanes
21. Gogolewski S. Biomedical Polyurethanes. In: Arshady R, editor. Desk Reference of functional polymers. Syntheses and applications. Washington, DC: American Chemical Society, 1997; p. 657–98.
22. Synthesis of biocompatible segmented polyurethanes from aliphatic diisocyanates and diurea diol chain extenders10.1016/j.actbio.2005.02.007 ↗
23. Synthesis, characterization and cytocompatibility of polyurethane urea elastomers with designed elastase sensitivity10.1021/bm0503322 ↗
24. Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications10.1016/j.biomaterials.2004.10.018 ↗
25. Synthesis and characterization of segmented poly(esterurethane urea) elastomers for bone tissue engineering10.1016/j.actbio.2007.02.001 ↗
26. Biodegradable polyurethanes: synthesis and applications in regenerative medicine10.1089/teb.2007.0133 ↗
27. Biodegradable and bioactive porous polyurethanes scaffolds for bone tissue engineering10.4236/jbise.2009.21007 ↗
28. Tailoring the degradation kinetics of poly(ester carbonate urethane)urea thermoplastic elastomers for tissue engineering scaffolds10.1016/j.biomaterials.2010.02.005 ↗
29. Synthesis, characterization, and remodeling of weight-bearing allograft bone/polyurethane composites in the rabbit10.1016/j.actbio.2010.01.030 ↗
30. A sustained release of lovastatin from biodegradable, elastomeric polyurethane scaffolds for enhanced bone regeneration10.1089/ten.tea.2009.0585 ↗
31. Degradable segmented polyurethane elastomers for bone tissue engineering: effect of polycaprolactone content10.1163/156856212X624985 ↗
32. Fibroblast growth on polymer surfaces and biosynthesis of collagen10.1002/jbm.820280705 ↗
33. Interaction of human chondrocytes and NIH/3T3 fibroblasts on chloric acid-treated biodegradable polymer surfaces10.1163/156856202317414375 ↗
34. American Type Culture Collection, (ATCC). Passage number effects in cell lines. Tech. Bull 2010; 7 (TB-0910-0.1-022007): 1–3.
35. Infrared studies of segmented polyurethane elastomers. I. Hydrogen bonding10.1021/ma60017a021 ↗
36. Bellamy · 1975
37. Interpretation of infrared spectra, a practical approach
38. Infrared frequencies of amide, urea, and urethane groups10.1021/j100552a026 ↗
39. Infrared thermal analysis of polyurethane block polymers10.1080/00222347808212599 ↗
40. Segmented copolyethers with urethane and urea or semicarbazide systems II10.1002/apmc.1979.050820110 ↗
41. Infrared analysis of the photochemical behaviour of segmented polyurethanes. 1. Aliphatic poly(ester-urethane)10.1016/S0032-3861(96)00984-6 ↗
42. Studies on the effect of virtual crosslinking on the hydrolytic stability of novel aliphatic polyurethane ureas for blood contact applications
43. The effect of virtual cross linking on the oxidative stability and lipid uptake of aliphatic poly(urethane urea)10.1016/S0142-9612(01)00106-5 ↗
44. Morphology, electrical resistance, electromagnetic interference shielding and mechanical properties of functionalized MWNT and poly(urea urethane) nanocomposites10.1002/polb.20766 ↗
45. Synthesis and characterization of segmented polyurethanes based on amphiphilic polyether diols10.1016/0142-9612(96)00056-7 ↗
46. SIMS and XPS studies of polyurethane surfaces. 1. Preliminary studies10.1021/ma00188a011 ↗
47. An Investigation of the surface chemistry of a polyetherurethaneurea biomaterial using XPS10.1116/1.1247809 ↗
48. Beamson · 1992
49. XPS and SIMS characterisation of segmented polyether polyurethanes containing two different soft segments10.1016/S0032-3861(97)00533-8 ↗
50. Variations between Biomer™ lots. Significant differences in the surface chemistry of two lots of a commercial poly(ether urethane)10.1002/jbm.820260302 ↗
51. Structural characterization of model polyester polyurethanes using time-of-flight secondary ion mass spectrometry10.1021/ma00220a020 ↗
52. Structural characterization of model polyester polyurethanes using time-of-flight secondary ion mass spectrometry
53. Leute A, Feld H, Rading D, Benninghoven A, Surface analysis by SIMS and PDMS. A comparison for polymers, in: Secondary Ion Mass Spectrometry, SIMS VIII. Chichester: Wiley; 1992. p. 589–92.
54. Surface organization of polyurethanes observed by static secondary ion mass-spectrometry10.1016/0032-3861(95)93107-W ↗
55. Characterization of polyester polyurethanes by time-of-flight secondary-ion mass spectrometry10.1021/ma00120a027 ↗
56. A time-of-flight secondary ion mass spectrometry study of sequential polymers with a well-defined segmental length10.1016/S0032-3861(01)00153-7 ↗
57. Klobes P, Klaus Meyer K, Munro RG. Porosity and Specific Surface Area Measurements for Solid Materials. Spec Publ 2006;960–17:1–89 [Natl Inst Sci Technology Admin, US Dept. of Commerce].
58. Swelling-induced crystallization of segmented polyurethanes10.1007/BF01499408 ↗
59. Liquid-induced crystallization and annealing of polyester-urethane elastomers10.1007/BF01544325 ↗