Rapid isothermal substrate microfabrication of a biocompatible thermoplastic elastomer for cellular contact guidance
Source abstract
Abstract
The use of microstructured substrates to study and influence cell orientation, which plays an important role in tissue functionality, has been of great interest lately. Silicon and poly(dimethylsiloxane) substrates have typically been used, but long processing times and exogenous protein surface coating, required to enhance cell viability, limit their use as large-scale platforms. There is thus a need for a non-biodegradable biocompatible substrate that allows rapid and low cost microfabrication. In this paper a styrene-(ethylene/butylene)-styrene block co-polymer (SEBS) microstructured by a rapid replication technique using low pressure an isothermal hot embossing approach has been demonstrated. SEBS substrates were treated with oxygen plasma to enhance cell adhesion and sterilized using ethylene oxide gas. While cell adhesion to and proliferation on these substrates was as good as on tissue culture polystyrene, cellular alignment on microstructured SEBS was also very high (97.7±0.5%) when calculated within a 10° angle variation from the longitudinal axis. Furthermore, tissue sheets on microstructured SEBS have been produced and exhibited cellular alignment within the engineered tissue. In addition, these results were obtained without coating the material with exogenous proteins. Such substrates should be helpful in the culture of tissue engineered substitutes with an intrinsic orientation and to elucidate questions in cell biology.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Nanofabrication and Lithography Techniques · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A completely biological tissue-engineered human blood vessel10.1096/fasebj.12.1.47 ↗
2. The cultivation of tissues in extraneous media as a method of morpho-genetic study10.1002/ar.1090060404 ↗
3. A new hypothesis of contact guidance in tissue cells10.1016/0014-4827(76)90405-5 ↗
4. Fibroblasts on micromachined substrata orient hierarchically to grooves of different dimensions10.1016/0014-4827(86)90450-7 ↗
5. Epithelial contact guidance on well-defined micro- and nanostructured substrates10.1242/jcs.00383 ↗
6. Corneal collagens10.1016/S0369-8114(01)00144-4 ↗
7. Effects on collagen orientation in the cornea after trephine injury
8. Computational modeling of mechanical anisotropy in the cornea and sclera10.1016/j.jcrs.2004.10.048 ↗
9. Effect of fiber orientation and strain rate on the nonlinear uniaxial tensile material properties of tendon10.1115/1.1614819 ↗
10. Modeling the tensile behavior of human Achilles tendon
11. The three-dimensional micro- and nanostructure of the aortic medial lamellar unit measured using 3D confocal and electron microscopy imaging10.1016/j.matbio.2007.10.008 ↗
12. Determination of layer-specific mechanical properties of human coronary arteries with nonatherosclerotic intimal thickening and related constitutive modeling10.1152/ajpheart.00934.2004 ↗
13. Orthogonal scaffold of magnetically aligned collagen lamellae for corneal stroma reconstruction10.1016/j.biomaterials.2007.05.024 ↗
14. Guidance of liver and kidney organotypic cultures inside rectangular silicone microchannels10.1016/j.biomaterials.2006.03.031 ↗
15. Growth behavior of fibroblasts on microgrooved polystyrene10.1016/S0142-9612(98)00093-3 ↗
16. Soft lithography10.1002/(SICI)1521-3773(19980316)37:5<550::AID-ANIE550>3.0.CO;2-G ↗
17. Soft lithography in biology and biochemistry10.1146/annurev.bioeng.3.1.335 ↗
18. In vitro study of the intrinsic toxicity of synthetic surfaces to cells10.1002/jbm.820280603 ↗
19. Early spreading events of fibroblasts on microgrooved substrates10.1002/1097-4636(20000905)51:3<529::AID-JBM30>3.0.CO;2-R ↗
20. Surface characterization of poly(methyl methacrylate) microgrooved for contact guidance of mammalian cells10.1016/S0142-9612(00)00321-5 ↗
21. Modeling and optimization of the hot embossing process for micro- and nanocomponent fabrication10.1007/s00542-006-0124-0 ↗
22. Optimization of control parameters in micro hot embossing10.1007/s00542-007-0497-8 ↗
23. Tissue-engineered human vascular media with a functional endothelin system10.1161/01.CIR.0000153850.53419.50 ↗
24. Nanoembossing of thermoplastic polymers for microfluidic applications10.1063/1.1479202 ↗
25. High fidelity, high yield production of microfluidic devices by hot embossing lithography: rheology and stiction10.1039/b600584e ↗
26. Microfabrication of poly(glycerol-sebacate) for contact guidance applications10.1016/j.biomaterials.2005.11.029 ↗
27. Evaluation of cell affinity on poly(l-lactide) and poly(epsilon-caprolactone) blends and on PLLA-b-PCL diblock copolymer surfaces10.1002/jbm.a.31796 ↗
28. The guidance of human mesenchymal stem cell differentiation in vitro by controlled modifications to the cell substrate10.1016/j.biomaterials.2006.05.001 ↗
29. Tissue engineering of a genitourinary tubular tissue graft resistant to suturing and high internal pressures10.1089/ten.tea.2007.0303 ↗
30. Impact of cell source on human cornea reconstructed by tissue engineering10.1167/iovs.08-2001 ↗
31. Development of tissue-engineered human periodontal ligament constructs with intrinsic angiogenic potential10.1159/000213247 ↗
32. Steady-shear rheology of block copolymer melts: zero-shear viscosity and shear disordering in body-centered-cubic systems10.1021/ma011522h ↗
33. Steady-shear rheology of block copolymer melts and concentrated solutions: disordering stress in body-centered-cubic systems10.1021/ma011523+ ↗
34. Roy E, Geissler M, Galas JC, Veres T. Rapid prototyping of microfluidic systems using a commercial thermoplastic elastomer. Microfluid Nanofluid, accepted for publication.
35. Stretching the stamp: a flexible approach for fabricating miniaturized DNA microarrays10.1002/smll.200900862 ↗
36. Dynamic mechanical conditioning of collagen–gel blood vessel constructs induces remodeling in vitro10.1114/1.275 ↗
37. A novel method of dynamic culture surface expansion improves mesenchymal stem cell proliferation and phenotype10.1634/stemcells.2008-0674 ↗