Synthesis of silicon nanocomposite for printable photovoltaic devices on flexible substrate
Source abstract
Abstract
Renewed interest has been established in the preparation of silicon nanoparticles for electronic device applications. In this work, we report on the production of silicon powders using a simple ball mill and of silicon nanocomposite ink for screen-printable photovoltaic device on a flexible substrate. Bulk single crystalline silicon was milled for 25 h in the ball mill. The structural properties of the produced silicon nanoparticles were investigated using X-ray diffraction (XRD) and transmission electron microscopy. The results show that the particles remained highly crystalline, though transformed from their original single crystalline state to polycrystalline. The elemental composition using energy dispersive X-ray florescence spectroscopy (EDXRF) revealed that contamination from iron (Fe) and chromium (Cr) of the milling media and oxygen from the atmosphere were insignificant. The size distribution of the nanoparticles follows a lognormal pattern that ranges from 60 nm to about 1.2 μm and a mean particle size of about 103 nm. Electrical characterization of screen-printed PN structures of the nanocomposite formed by embedding the powder into a suitable water-soluble polymer on Kapton sheet reveals an enhanced photocurrent transport resulting from photo-induced carrier generation in the depletion region with energy greater that the Schottky barrier height at the metal-composite interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanowire Synthesis and Applications · TiO2 Photocatalysis and Solar Cells · Nanotechnology research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Abdus Salam S, Suman Kalyan P (2015) Exponentially distributed trap-controlled space charge limited conduction in graphene oxide films. J Phys D Appl Phys 48:445501–44550610.1088/0022-3727/48/44/445501 ↗
2. Ajaal T, Smith RW, Yen WT (2002) The development and characterization of a ball mill for mechanical alloying. Can Metall Q 41:7–1410.1179/cmq.2002.41.1.7 ↗
3. Alizadeh M, Sharifianjazi F, Haghshenasjazi E, Aghakhani M, Rajabi L (2015) Production of nanosized boron oxide powder by high-energy ball milling. Synth React Inorg, Met-Org, Nano-Met Chem 45:11–1410.1080/15533174.2013.797438 ↗
4. Ando M, Miyamoto H, Naito H, Kanemitsu Y (2002) Photoelectric properties of printed thin films of silicon nanocrystals dispersed in polymer binder. J Non-Cryst Solids 1084:299–302
5. Baig MI, Ingole PG, Choi WK, Jeon J-D, Jang B, Moon JH, Lee HK (2017) Synthesis and characterization of thin film nanocomposite membranes incorporated with surface functionalized silicon nanoparticles for improved water vapor permeation performance. Chem Eng J 308:27–3910.1016/j.cej.2016.09.033 ↗
6. Boukennous Y, Benyahia B, Charif MR, Elamrani A, Moussa MF (2007) Integral screen printed solar cells panel. Rev Energ Renouv 10:119–125
7. Britton DT, Odo EA, Harting M (2007) THICK FILM SEMICONDUCTING INKS. WO/2007/072162. USA patent application PCT/IB2006/003666
8. Britton DT, Odo EA, Harting M (2009) INKJET PRINTING OF NANOPARTICULATE FUNCTIONAL INKS. WO/2009/147619. USA patent application PCT/IB2009/052317
9. Cheng Y-B, Pascoe A, Huang F, Peng Y (2016) Print flexible solar cells. Nature 539:488–48910.1038/539488a ↗
10. De Castro CL, Mitchell BS. (2002) Nanoparticles from mechanical attrition. In: Baraton MI, editor. Synthesis, Functionalization, and Surface Treatment of Nanoparticles. American Scientific Publisher, Valencia, pp. 1–15
11. Dιaz-Guerra C, Montone A, Piqueras J, Cardellini F (2001) Structural and cathodoluminescence study of mechanically milled silicon. Semicond Sci Technol 17:77–8210.1088/0268-1242/17/1/312 ↗
12. El-Barry AMA (2007) Photoinduced crystallization and space charge limited current through Au/Se92.7S7.3/Au thin films. Phys B Condens Matter 396:49–5610.1016/j.physb.2007.03.004 ↗
13. El-Sayed SM (2002) Space-charge-limited current, trap distribution and optical energy gap in amorphous (In13Se87 and In20Se80) thin films. Vacuum 65:177–18410.1016/S0042-207X(01)00479-1 ↗
14. Fu J, Wei C, Wang W, Wei JL, Lv J (2015) Studies of structure and properties of graphene oxide prepared by ball milling. Mater res Innov 19:S1-277–S1-28010.1179/1432891715Z.0000000001486 ↗
15. Gaffet E, Harmelin M (1990) Crystal-amorphous phase transition induced by ball-milling in silicon. J Less-Common Met 157:201–22210.1016/0022-5088(90)90176-K ↗
16. Goswami R, Chowdhury B, Ray S (2008) Solid phase crystallization of protocrystalline silicon films: changes in structural and optical properties. Thin Solid Films 51610.1016/j.tsf.2007.08.092 ↗
17. Hoth CN, Schilinsky P, Choulis SA, Balasubramanian S, Brabec CJ (2013) Solution-processed organic photovoltaics. In: Cantator E (ed) Applications of Organic and Printed Electronics. Springer, USA10.1007/978-1-4614-3160-2_2 ↗
18. Hoz Z, Reichard R, Kim JS (2002) Application and design of drum mills. Proceedings of the World Congress on Powder Metallurgy & Particulate Materials, 16–21 June 2002 Orlando, FL, USA
19. Jacoby M (2016) The future of low-cost solar cells. Chemical and Engineering News. 94(18) 30-35pp10.1021/cen-09418-cover ↗
20. Joung D, Chunder A, Zhai L, Khondaker SI (2010) Space charge limited conduction with exponential trap distribution in reduced graphene oxide sheets. Appl Phys Lett 97:09310510.1063/1.3484956 ↗
21. Jung S, Sou A, Banger K, Ko D-H, Chow PCY, Mcneill CR, Sirringhaus H (2014) All-inkjet-printed, all-air-processed solar cells. Adv Energy Mater 4:140043210.1002/aenm.201400432 ↗
22. Kelsall R, Hamley I, Geoghegan M (2005) Nanoscale science and technology. John Wiley and Sons Ltd, West Sussex10.1002/0470020873 ↗
23. Koole R, Groeneveld E, Vanmaekelbergh D, Meijerink A, Donegá CM (2014) Size effects on semiconductor nanoparticles. Springer, Verlag Berlin Heidelberg
24. Kruis FE, Goossens A, Fissan H (1996) Synthesis of semiconducting nanoparticles. J Aerosol Sci 27:165–16610.1016/0021-8502(96)00155-3 ↗
25. Kuang L, Mitchell BS, Fink MJ (2015) Silicon nanoparticles synthesised through reactive high-energy ball milling: enhancement of optical properties from the removal of iron impurities. J Exp Nanosci 10:1214–122210.1080/17458080.2014.989552 ↗
26. Laera AM, Resta V, Ferrara MC, Schioppa M, Piscopiello E, Tapfer L (2011) Synthesis of hybrid organic–inorganic nanocomposite materials based on CdS nanocrystals for energy conversion applications. J Nanopart res 13:5705–571710.1007/s11051-011-0304-4 ↗
27. Lin H, Huang CP, Li W, Ni C, Shah SI, Tseng Y-H (2006) Size dependency of nanocrystalline TiO2 on its optical property and photocatalytic reactivity exemplified by 2-chlorophenol. Appl Catal B Environ 68:1–1110.1016/j.apcatb.2006.07.018 ↗
28. Liu R (2014) Hybrid organic/inorganic nanocomposites for photovoltaic cells. Materials 7:2747–277110.3390/ma7042747 ↗
29. Momeni A, Mahdieh MH (2016) Photoluminescence analysis of colloidal silicon nanoparticles in ethanol produced by double-pulse ns laser ablation. J Lumin 176:136–14310.1016/j.jlumin.2016.03.029 ↗
30. Muniz FTLO, Miranda MALR, Santos CSMD, Sasaki JM (2016) The Scherrer equation and the dynamical theory of X-ray diffraction. Acta Crystallogr A A72:385–39010.1107/S205327331600365X ↗
31. Murty B, Ranganathan S (1998) Novel materials synthesis by mechanical alloying/milling. Int Mater rev 43:101–11410.1179/imr.1998.43.3.101 ↗
32. Nissinen T, Ikonen T, Lama M, Riikonen J, Lehto V-P (2016) Improved production efficiency of mesoporous silicon nanoparticles by pulsed electrochemical etching. Powder Technol 288:360–36510.1016/j.powtec.2015.11.015 ↗
33. Odo EA, Britton DT, Gonfa GG, Harting M (2012a) Mechanism of DC conduction in silicon nanoparticles network. Afr Rev Phys 7:389–400
34. Odo EA, Britton DT, Gonfa GG, Harting M (2012b) Structure and characterization of silicon nanoparticles produced using a vibratory disc mill. Afr Rev Phys 7:45–56
35. Odo EA, Britton DT, Harting M (2017) Sub-oxide passivation of silicon nanoparticles through rapid mechanical attrition. Powder Technol 317:230–23510.1016/j.powtec.2017.03.037 ↗
36. Rossetti R, Brus L (1982) Electron-hole recombination emission as a probe of surface chemistry in aqueous cadmium sulfide colloids. J Phys Chem 86:4470–447210.1021/j100220a003 ↗
37. Sato Y, Tanaka T, Oba F, Yamamoto T, Ikuhara Y, Sakuma T (2003) Non-linear current–voltage characteristics related to native defects in SrTiO3 and ZnO bicrystals. Sci Technol Adv Mater 4:605–61110.1016/j.stam.2003.10.031 ↗
38. Schneider M, Romer M, Tschudin M, Bolio H (2011) Sustainable cement production—present and future. Cem Concr res 41:642–65010.1016/j.cemconres.2011.03.019 ↗
39. Sharma P, Sharma S, Khanduja D (2015) On the use of ball milling for the production of ceramic powders. Mater Manuf Process 30:1370–137610.1080/10426914.2015.1037904 ↗
40. Suryanarayana C (2001) Mechanical alloying and milling. Prog Mater Sci 46:1–18410.1016/S0079-6425(99)00010-9 ↗
41. Svrcek V, Rehspringer JL, Gaffet E, Slaoui A, Muller JC (2005) Unaggregated silicon nanocrystals obtained by ball milling. J Cryst Growth 275:589–59710.1016/j.jcrysgro.2004.12.012 ↗
42. Wills BA, Napier-Munn TJ (2006) Mineral processing technology:an Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery. Butterworth-Heinemann (Elsevier), Burlington10.1016/B978-075064450-1/50003-5 ↗
43. Yang D-Q, Gillet J-N, Meunier M, Sacher E (2005) Room temperature oxidation kinetics of Si nanoparticles in air, determined by x-ray photoelectron spectroscopy. J Appl Phys 97:024303–02430610.1063/1.1835566 ↗