journal article·2019-08

Hierarchical assembly in PLA-PEO-PLA hydrogels with crystalline domains and effect of block stereochemistry

Xuechen Yin, David R.O. Hewitt, Alyssa N. Preston, Luke A. Heroux, Michael M. Agamalian, Suan P. Quah, Bingqian Zheng, Andrew J. Smith, Scott T. Laughlin, Robert B. Grubbs, Surita R. Bhatia

Publisher page

Abstract

Understanding the development of microstructure (e.g., structures with length scales roughly 0.5-500 μm) in hydrogels is crucial for their use in several biomedical applications. We utilize ultra-small-angle neutron scattering (USANS) and confocal microscopy to explore microstructure of poly(lactide)-poly(ethylene oxide)-poly(lactide) (PLA-PEO-PLA) triblock copolymer hydrogels with varying l/d-lactide ratio. We have previously found that these polymers self-assemble on the nanoscale into micelles. Here, we observe large-scale structures with diverse morphologies, including highly porous self-similar networks with characteristic sizes spanning approximately 120 nm-200 μm. These structural features give rise to power-law scattering indicative of fractal structures in USANS. Mass fractal and surface fractal structures are found for gels with l/d ratios of 80/20 and 50/50, respectively. Confocal microscopy shows microscale water-filled channels and pores that are more clearly evident in gels with a higher fraction of l-lactide in the PLA block as compared to the 50/50 hydrogels. Tuning block stereochemistry may provide a means of controlling the self-assembly and structural evolution at both the nanoscale and microscale, impacting application of these materials in tissue engineering and drug delivery.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogels: synthesis, properties, applications · Pickering emulsions and particle stabilization · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Designing hydrogels for controlled drug delivery10.1038/natrevmats.2016.71 ↗
2. Marrow-derived stem cell motility in 3D synthetic scaffold is governed by geometry along with adhesivity and stiffness10.1002/bit.23027 ↗
3. Synthetic light-curable polymeric materials provide a supportive niche for dental pulp stem cells10.1002/adma.201704486 ↗
4. Combinatorial discovery of polymers resistant to bacterial attachment10.1038/nbt.2316 ↗
5. Toxicity and antitumor-activity against solid tumors of micelle-forming polymeric anticancer drug and its extremely long circulation in blood
6. Pluronic (R) block copolymers in drug delivery: from micellar nanocontainers to biological response modifiers10.1615/CritRevTherDrugCarrierSyst.v19.i1.10 ↗
7. Nanoparticle-reinforced associative network hydrogels10.1021/la8015518 ↗
8. A phase 2 study of SP1049C, doxorubicin in P-glycoprotein-targeting pluronics, in patients with advanced adenocarcinoma of the esophagus and gastroesophageal junction10.1007/s10637-010-9399-1 ↗
9. Translational impact of nanoparticle-drug conjugate CRLX101 with or without bevacizumab in advanced ovarian cancer10.1158/1078-0432.CCR-14-2810 ↗
10. Tuning of sol-gel transition in the mixed polymer micelle solutions of copolymer mixtures consisting of enantiomeric diblock and triblock copolymers of polylactide and poly(ethylene glycol)10.1002/macp.201400581 ↗
11. End block design modulates the assembly and mechanics of thermoresponsive, dual-associative protein hydrogels10.1021/ma502494s ↗
12. Physical gels based on charge-driven bridging of nanoparticles by triblock copolymers10.1021/la301917e ↗
13. Stereocomplexed physical hydrogels with high strength and tunable crystallizability10.1039/C7SM01491K ↗
14. Self-assembly of pluronic F127 diacrylate in ethylammonium nitrate: structure, rheology, and ionic conductivity before and after photo-cross-linking10.1021/acs.macromol.6b00205 ↗
15. Neovascularization of synthetic membranes directed by membrane microarchitecture10.1002/jbm.820291208 ↗
16. Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: three-dimensional micro-CT based structural analyses of porous bioactive titanium implants10.1016/j.biomaterials.2006.08.013 ↗
17. Design of dental implants, influence on the osteogenesis and fixation10.1007/s10856-008-3421-6 ↗
18. Engineering synthetic hydrogel microenvironments to instruct stem cells10.1016/j.copbio.2013.03.009 ↗
19. Quantitative-analysis of neovascularization of different ptfe-implants10.1016/1010-7940(90)90003-I ↗
20. The effects of porosity on endothelialization of ePTFE implanted in subcutaneous and adipose tissue10.1002/(SICI)1097-4636(19970315)34:4<463::AID-JBM7>3.0.CO;2-I ↗
21. Engineering the tissue which encapsulates subcutaneous implants. 1. Diffusion properties10.1002/(SICI)1097-4636(19971205)37:3<401::AID-JBM11>3.0.CO;2-E ↗
22. Engineering the tissue which encapsulates subcutaneous implants. II. Plasma-tissue exchange properties10.1002/(SICI)1097-4636(19980615)40:4<586::AID-JBM10>3.0.CO;2-E ↗
23. Engineering the tissue which encapsulates subcutaneous implants. III. Effective tissue response times10.1002/(SICI)1097-4636(19980615)40:4<598::AID-JBM11>3.0.CO;2-C ↗
24. Characterization of soluble, salt-loaded, degradable PLGA films and their release of tetracycline10.1002/(SICI)1097-4636(199807)41:1<18::AID-JBM3>3.0.CO;2-T ↗
25. Degradable controlled-release polymers and polymeric nanoparticles: mechanisms of controlling drug release10.1021/acs.chemrev.5b00346 ↗
26. Critical evaluation of biodegradable polymers used in nanodrugs
27. Engineering microscale topographies to control the cell-substrate interface10.1016/j.biomaterials.2012.03.079 ↗
28. Tissue engineering at the micro-scale10.1023/A:1009949704750 ↗
29. Cell-size control10.1101/cshperspect.a019083 ↗
30. Ultra-small-angle scattering studies of complex fluids10.1016/j.cocis.2004.10.001 ↗
31. Correlations between structure, material properties and bioproperties in self-assembled beta-hairpin peptide hydrogels10.1039/b717616c ↗
32. In situ fabrication of Fiber reinforced three-dimensional hydrogel tissue engineering scaffolds10.1021/acsbiomaterials.7b00229 ↗
33. Secondary-structure-mediated hierarchy and mechanics in polyurea-peptide hybrids10.1021/acs.biomac.8b00762 ↗
34. Sponge-like heterogeneous gels: hierarchical structures in poly(N-isopropylacrylamide) chemical gels as observed by combined scattering and confocal microscopy method10.1021/ma800518t ↗
35. USANS study of porosity and water content in sponge-like hydrogels10.1016/j.polymer.2010.02.034 ↗
36. Fibrillar structure in aqueous methylcellulose solutions and gels10.1021/ma4021642 ↗
37. Microstructure characterization of alkali-glass particle and alkali-glass powder reacted gels with neutron scattering and imaging techniques10.1016/j.matchar.2017.07.006 ↗
38. Rheological and structural properties of coagulated milks reconstituted in D2O: comparison between rennet and a tamarillo enzyme (tamarillin)10.1016/j.foodhyd.2017.12.004 ↗
39. Morphological structure of Gluconacetobacter xylinus cellulose and cellulose-based organic-inorganic composite materials10.1088/1742-6596/848/1/012017 ↗
40. A mini review on the functional biomaterials based on poly (lactic acid) stereocomplex10.1080/15583724.2015.1111380 ↗
41. Micro- to nanoscale structure of biocompatible PLA-PEO-PLA hydrogels10.1021/la063390x ↗
42. Novel drug release profiles from micellar solutions of PLA-PEO-PLA triblock copolymers10.1016/j.jconrel.2005.12.024 ↗
43. Impact of stereochemistry on rheology and nanostructure of PLA-PEO-PLA triblocks: stiff gels at intermediate l/d-lactide ratios10.1039/C8SM01559G ↗
44. Preparation of curcumin loaded poly(vinyl alcohol)-poly(ethylene oxide)-carboxymethyl cellulose membranes for wound care application10.1166/jbt.2013.1092 ↗
45. Organic catalysis for ring-opening polymerization10.1021/mz3005956 ↗
46. Amidine-mediated zwitterionic polymerization of lactide10.1021/mz300276u ↗
47. Synthesis and rheological properties of polylactide/poly(ethylene glycol) multiblock copolymers10.1002/mabi.200500143 ↗
48. Controlled thermoresponsive hydrogels by stereocomplexed PLA-PEG-PLA prepared via hybrid micelles of pre-mixed copolymers with different PEG lengths10.1021/bm300325v ↗
49. Progress on the time-of-flight ultra small angle neutron scattering instrument at SNS
50. The suite of small-angle neutron scattering instruments at Oak Ridge National Laboratory10.1107/S1600576718001231 ↗
51. An iterative method of slit-correcting small angle X-ray data10.1107/S0365110X67002440 ↗
52. Structural characterization of PLA-PEO-PLA solutions and hydrogels: crystalline vs amorphous PLA domains10.1021/ma070634r ↗
53. Rheological characterization of biocompatible associative polymer hydrogels with crystalline and amorphous endblocks10.1557/jmr.2006.0261 ↗
54. Guanidine and amidine organocatalysts for ring-opening polymerization of cyclic esters10.1021/ma0619381 ↗
55. Thermal degradation of poly (l-lactide): accelerating effect of residual DBU-based organic catalysts10.1016/j.polymdegradstab.2011.02.014 ↗
56. Synthesis and stereocomplex formation of star-shaped stereoblock polylactides consisting of poly (l-lactide) and poly (d-lactide) arms10.1021/ma401375x ↗
57. Analysis of small angle neutron scattering spectra from polydisperse interacting colloids10.1063/1.446055 ↗
58. Solvent isotope effects on alkytrimethylammonium bromide micelles as a function of alkyl chain length10.1021/j100302a024 ↗
59. Hard-sphere interactions between spherical domains in diblock copolymers10.1021/ma00139a013 ↗
60. Small-angle X-ray-scattering investigation of submicroscopic porosity with fractal properties10.1103/PhysRevLett.53.596 ↗
61. The fractal geometry of nature—Mandelbrot, B.B10.1002/j.2326-1951.1983.tb02653.x ↗