Technical Note: Concepts for protection of EUVL masks from particle contamination
Source abstract
Abstract
Extreme ultraviolet lithography (EUVL) is a leading lithography technology for the next generation of semiconductor chips. Due to the lack of any useable common membrane pellicles, different approaches have to be considered in order to protect the EUV photomasks from particle contamination during all handling steps, i.e. during shipping and storage at atmospheric pressure as well as during exposure in dedicated lithography tools at low pressure (e.g. 50 mTorr). In this manuscript we present the evolution of schemes for protecting the very valuable EUVL masks from nanoparticle contamination. The proposed protection schemes are (1) maintaining the critical mask surface upside down to avoid gravitational settling of particles onto the mask; (2) use of a cover plate to reduce the volume from where particles might reach the surface; (3) apply thermal and/or electrical gradient to expose particles to a repelling thermophoretic and/or electrophoretic force and (4) use of a particle trap, surrounding the mask.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Particle Dynamics in Fluid Flows · Recycling and Waste Management Techniques · Aerosol Filtration and Electrostatic Precipitation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Asbach C., Kim J.H., Yook S.J., Pui D.Y.H., Ramamoorthy A., Orvek K., Fissan H. (2005) Analytical modeling of particle stopping distance at low pressure to evaluate protection schemes for EUVL masks. Appl. Phys. Lett. 87: 234,111
2. Choi S.J., Rader D.J., Geller A.S. (1996) Massively parallel simulations of Brownian dynamics particle transport in low pressure parallel-plate reactors. J. Vac. Sci. Technol. A 14(2): 660–66510.1116/1.580120 ↗
3. Dedrick D.E., Beyer E.W., Rader D.J., Klebanoff L.E., Leung A.H. (2005). Verification studies of thermophoretic protection for extreme ultraviolet masks. J. Vac. Sci. Technol. B 23(1): 307–31710.1116/1.1856463 ↗
4. Fissan H. (2003) Zwischen Killerpartikeln und molekularer Kontamination. Reinraumtechnik 01/2003: 38–42
5. Hector S., Mangat P. (2001) Review of progress in extreme ultraviolet lithography masks. J. Vac. Sci. Technol. B 19(6): 2612–261610.1116/1.1408957 ↗
6. Kim J.H., Asbach C., Yook S.J., Fissan H., Orvek K., Ramamoorthy A., Yan P.Y., Pui D.Y.H. (2005a) Protection schemes for critical surfaces in vacuum environment. J. Vac. Sci. Technol. A 23(5): 1319–132410.1116/1.1978890 ↗
7. Kim J.H., C. Asbach, S.J. Yook, K. Orvek, A. Ramamoorthy, H. Fissan & D.Y.H. Pui, 2005b. Investigation of thermophoretic protection with speed-controlled particles at 100 mTorr, 50 mTorr and 25 mTorr. J. Vac. Sci. Technol. A (submitted)10.1116/1.2190660 ↗
8. Klebanoff L. & D.J. Rader, 2000. Protection of Lithographic Components from Particle Contamination, Patent No.: 6,153,044, USA.
9. Klebanoff L. & D.J. Rader, 2001. Method for Protection of Lithographic Components from Particle Contamination, US Patent No.: 6,253,464 B1, USA.
10. Opiolka S., Fissan H. (1990) Reduzierung des Partikeltransportes auf Oberflächen. Reinraumtechnik 4: 85–88
11. Peterson T.W., Stratmann F., Fissan H. (1989) Particle deposition on wafers: a comparison between two modeling approaches. J. Aerosol Sci. 20(6): 683–69310.1016/0021-8502(89)90057-8 ↗
12. Pozzetta (2006) Series PZT600 information material: http://www.pozzetta.com/products/photomask/PZTOverview.htm
13. Schmidt F., Fissan H., Schmidt K.G. (1996). Transport of submicron particles from a leak to a perpendicular surface in a chamber at reduced pressure. J. Aerosol Sci. 27(5): 739–75010.1016/0021-8502(96)00023-7 ↗
14. Waldmann L. (1959). Über die Kraft eines inhomogenen Gases auf kleine suspendierte Kugeln. Zeitschrift für Naturforschung 14a(7): 589–59910.1515/zna-1959-0701 ↗
15. Ye Y., Liu B.Y.H., Pui D.Y.H. (1993). Condensation-induced particle formation during vacuum pump down. J. Electrochem. Soc. 140(5): 1463–146810.1149/1.2221580 ↗
16. Ye Y., Pui D.Y.H., Liu B.Y.H., Opiolka S., Blumhorst S., Fissan H. (1991) Thermophoretic effect of particle deposition on a free standing semiconductor wafer in a clean room. J. Aerosol Sci. 22(1): 63–7210.1016/0021-8502(91)90093-W ↗
17. Zhao J., 1990. Thermodynamics and particle formation during vacuum pump-down. PhD Thesis, University of Minnesota, Minneapolis.