journal article·2015-07

Structural and optical characterization of CuInS2 quantum dots synthesized by microwave-assisted continuous flow methods

Robert C. Fitzmorris, Richard P. Oleksak, Zheng Zhou, Benjamin D. Mangum, Juanita N. Kurtin, Gregory S. Herman

Journal of Nanoparticle Research· Volume 17· Issue 7
Publisher page

Abstract

Semiconductor quantum dots (QDs) have recently been incorporated into consumer displays and lighting technologies. Now that these materials are being produced on industrial scales, it is important to investigate scalable synthetic methods and less toxic materials and chemistries. To achieve these goals, we have synthesized cadmium-free, visible light-emitting QDs using a microwave-assisted continuous flow reactor. After synthesis, the CuInS2 QD cores underwent a near-complete Zn cation exchange reaction in a batch reactor, followed by the growth of a ZnS shell. Analysis of X-ray diffraction, transmission electron microscopy, and Raman spectroscopy data indicate that the crystal structure changes from CuInS2 (chalcopyrite) to ZnS (zincblende) during the cation exchange reaction. Compositional analysis indicated that the core/shell QDs were ~98 % ZnS, with Cu and In present at much lower concentrations. The photoluminescence (PL) peak position was blue shifted for longer cation exchange reactions, and it was found that the ZnS shell was necessary for improved PL stability. The synthesized QDs have a PL down conversion efficiency of ~65 % when using a blue LED source.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films · Advanced Photocatalysis Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Akkerman QA et al (2015) From binary Cu2S to ternary Cu-In-S and quaternary Cu-In-Zn-S nanocrystals with tunable composition via partial cation exchange. ACS Nano 9:521–53110.1021/nn505786d ↗
2. Bergamelli F, Iannelli M, Marafie JA, Moseley JD (2010) A commercial continuous flow microwave reactor evaluated for scale-up. Org Process Res Dev 14:926–93010.1021/op100082w ↗
3. Bilecka I, Niederberger M (2010) Microwave chemistry for inorganic nanomaterials synthesis. Nanoscale 2:1358–137410.1039/b9nr00377k ↗
4. Castro SL, Bailey SG, Raffaelle RP, Banger KK, Hepp AF (2004) Synthesis and characterization of colloidal CuInS2 nanoparticles from a molecular single-source precursor. J Phys Chem B 108:12429–1243510.1021/jp049107p ↗
5. Cooper JK, Gul S, Lindley S, Yano J, Zhang JZ (2015) Tunable photoluminescent core/shell Cu+-doped ZnSe/ZnS quantum dots codoped with Al3+, Ga3+, or In3+. ACS Appl Mater Interfaces 7:10055–1006610.1021/acsami.5b02860 ↗
6. Dabbousi BO et al (1997) (CdSe) ZnS core- shell quantum dots: synthesis and characterization of a size series of highly luminescent nanocrystallites. J Phys Chem B 101:9463–947510.1021/jp971091y ↗
7. De Trizio L et al (2012) Strongly fluorescent quaternary Cu–In–Zn–S nanocrystals prepared from Cu1−xInS2 nanocrystals by partial cation exchange. Chem Mater 24:2400–240610.1021/cm301211e ↗
8. Du X et al (2015) Fabrication of a flexible amperometric glucose sensor using additive processes. ECS J Solid State Sci Technol 4:P3069–P307410.1149/2.0101504jss ↗
9. Ekimov A, Onushchenko A (1981) Quantum size effect in three-dimensional microscopic semiconductor crystals. ZhETF Pisma Redaktsiiu 34:363
10. Elinder C (1991) Cadmium as an environmental hazard. IARC scientific publications, Lyon, pp 123–132
11. Fitzmorris RC, Pu Y-C, Cooper JK, Lin Y-F, Hsu Y-J, Li Y, Zhang JZ (2013) Optical properties and exciton dynamics of alloyed core/shell/shell CdxZn1−xSe/ZnSe/ZnS quantum dots. ACS Appl Mater Interfaces 5:2893–290010.1021/am303149r ↗
12. Glasnov TN, Kappe CO (2007) Microwave-assisted synthesis under continuous-flow conditions. Macromol Rapid Commun 28:395–41010.1002/marc.200600665 ↗
13. Hostetler EB et al (2014) Synthesis of colloidal PbSe nanoparticles using a microwave-assisted segmented flow reactor. Mater Lett 128:54–5910.1016/j.matlet.2014.04.089 ↗
14. Joo J et al (2003) Generalized and facile synthesis of semiconducting metal sulfide nanocrystals. J Am Chem Soc 125:11100–1110510.1021/ja0357902 ↗
15. Kim K-J et al (2014) A continuous microwave-assisted gas-liquid segmented flow reactor for controlled nucleation and growth of nanocrystals. Cryst Growth Des 14:5349–535510.1021/cg500959m ↗
16. Kim BH et al (2015) High-resolution patterns of quantum dots formed by electrohdrodynamic jet printing for light-emitting diodes. Nano Lett 15:969–97310.1021/nl503779e ↗
17. Li L, Pandey A, Werder DJ, Khanal BP, Pietryga JM, Klimov VI (2011) Efficient synthesis of highly luminescent copper indium sulfide-based core/shell nanocrystals with surprisingly long-lived emission. J Am Chem Soc 133:1176–117910.1021/ja108261h ↗
18. Lu S, Huang H, Wang Y, Chen T, Wang A, Zheng D (2015) (ZnS)x(Cu0.1InS1.55) heteronanocrystals with broadband emission as a single component for potential WLEDs. Appl Surf Sci 355:263–26810.1016/j.apsusc.2015.06.132 ↗
19. Marre S, Park J, Rempel J, Guan J, Bawendi MG, Jensen KF (2008) Supercritical continuous-microflow synthesis of narrow size distribution quantum dots. Adv Mater 20:4830–483410.1002/adma.200801579 ↗
20. Nam D-E, Song W-S, Yang H (2011) Noninjection, one-pot synthesis of Cu-deficient CuInS2/ZnS core/shell quantum dots and their fluorescent properties. J Colloid Interface Sci 361:491–49610.1016/j.jcis.2011.05.058 ↗
21. Ohrendorf F, Haeuseler H (1999) Lattice dynamics of chalcopyrite type compounds. Part I. Vibrational frequencies. Cryst Res Technol 34:339–34910.1002/(SICI)1521-4079(199903)34:3<339::AID-CRAT339>3.0.CO;2-E ↗
22. Omata T, Nose K, Kurimoto K, Kita M (2014) Electronic transition responsible for size-dependent photoluminescence of colloidal CuInS2 quantum dots. J Mater Chem C 2:6867–687210.1039/C4TC01144A ↗
23. Park J, Kim S-W (2011) CuInS2/ZnS core/shell quantum dots by cation exchange and their blue-shifted photoluminescence. J Mater Chem 21:3745–375010.1039/c0jm03194a ↗
24. Peng ZA, Peng X (2002) Nearly monodisperse and shape-controlled CdSe nanocrystals via alternative routes: nucleation and growth. J Am Chem Soc 124:3343–335310.1021/ja0173167 ↗
25. Rossetti R, Nakahara S, Brus L (1983) Quantum size effects in the redox potentials, resonance Raman spectra, and electronic spectra of CdS crystallites in aqueous solution. J Chem Phys 79:1086–108810.1063/1.445834 ↗
26. Spehar RL, Anderson RL, Fiandt JT (1978) Toxicity and bioaccumulation of cadmium and lead in aquatic invertebrates Environmental Pollution (1970) 15:195–20810.1016/0013-9327(78)90065-4 ↗
27. Speranskaya ES et al (2014) Hydrophilic, bright CuInS2 quantum dots as Cd-free fluorescent labels in quantitative immunoassay. Langmuir 30:7567–757510.1021/la501268b ↗
28. Talapin DV, Steckel J (2013) Quantum dot light-emitting devices. MRS Bull 38:685–69110.1557/mrs.2013.204 ↗
29. Trachsel F, Günther A, Khan S, Jensen KF (2005) Measurement of residence time distribution in microfluidic systems. Chem Eng Sci 60:5729–573710.1016/j.ces.2005.04.039 ↗
30. Uehara M, Watanabe K, Tajiri Y, Nakamura H, Maeda H (2008) Synthesis of CuInS2 fluorescent nanocrystals and enhancement of fluorescence by controlling crystal defect. J Chem Phys 129:13470910.1063/1.2987707 ↗
31. Van Embden J, Jasieniak J, Gómez DE, Mulvaney P, Giersig M (2007) Review of the synthetic chemistry involved in the production of core/shell semiconductor nanocrystals. Aust J Chem 60:457–47110.1071/CH07046 ↗
32. Wiles C, Watts P (2008) Continuous flow reactors, a tool for the modern synthetic chemist Eur. J Org Chem 2008:1655–1671
33. Wu K, Wang D (2011) Temperature-dependent Raman investigation of CuInS2 with mixed phases of chalcopyrite and CuAu. Phys Status Solidi (a) 208:2730–273610.1002/pssa.201127262 ↗
34. Yen BK, Stott NE, Jensen KF, Bawendi MG (2003) A continuous-flow microcapillary reactor for the preparation of a size series of CdSe nanocrystals. Adv Mater 15:1858–186210.1002/adma.200305162 ↗
35. Yu K et al (2013) Low-temperature approach to highly emissive copper indium sulfide colloidal nanocrystals and their bioimaging applications. ACS Appl Mater Interfaces 5:2870–288010.1021/am302951k ↗
36. Yuan Y, Riehle F-S, Gu H, Thomann R, Urban G, Krüger M (2010) Critical parameters for the scale-up synthesis of quantum dots. J Nanosci Nanotechnol 10:6041–604510.1166/jnn.2010.2564 ↗
37. Zhang JZ, Cooper JK, Gul S (2014) Rational codoping as a strategy to improve optical properties of doped semiconductor quantum dots. J Phys Chem Lett 5:3694–370010.1021/jz501739v ↗
38. Zhong H, Lo SS, Mirkovic T, Li Y, Ding Y, Li Y, Scholes GD (2010) Noninjection gram-scale synthesis of monodisperse pyramidal CuInS2 nanocrystals and their size-dependent properties. ACS Nano 4:5253–526210.1021/nn1015538 ↗
39. Zhong H, Bai Z, Zou B (2012) Tuning the luminescence properties of colloidal I-III–VI semiconductor nanocrystals for optoelectronics and biotechnology applications. J Phys Chem Lett 3:3167–317510.1021/jz301345x ↗