Macro-prepared Cs4PbBr6/CsPbBr3 perovskite screen printing inks
Source abstract
Abstract
Perovskite has shown attractive optoelectronic performances and is a potential material in lighting, anti-counterfeiting, sensor, and other optoelectronic devices. Recently, spin-coating has been widely used in fabricating high-performance perovskite films, but it is difficult to process and apply in practice. In this paper, the CsPbBr3/Cs4PbBr6 composite perovskite quantum dots with photoluminescence quantum yield of 36% and high storage stability were prepared by using room temperature ligand-assisted precipitation method and controlling the proportion of CsBr/PbBr2. In addition, the composite perovskite was ground and dispersed in the inks system. After adjusting the composition and ratio of the resin components, the inks were suitable for screen printing with a viscosity of 2439 mPa•s, an initial dryness of 25 mm/30 s, and a thorough dryness of 100 s/100 μm. By printing, the perovskite films exhibited high coverage, strong green emission, and outstanding fluorescence recovery ability after exposure to water. Screen printing perovskite inks have the characteristic of being patternable, which provides a solution for preparing a perovskite film in the application.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Akkerman QA, Abdelhady AL, Manna L (2018) Zero-dimensional cesium lead halides: history, properties, and challenges. J Phys Chem Lett 9(9):2326–2337. https://doi.org/10.1021/acs.jpclett.8b0057210.1021/acs.jpclett.8b00572 ↗
2. Cai J, Gu K, Zhu Y, Zhu J, Wang Y, Shen J, Trinchi A, Li C, Wei G (2018) Highly stable CsPbBr 3@SiO2 nanocomposites prepared via confined condensation for use as a luminescent ink. Chem Commun (camb) 54(58):8064–8067. https://doi.org/10.1039/c8cc04130j10.1039/c8cc04130j ↗
3. Choi SH, Kim BY, Kang BK, Kwon SB, Jeong HJ, Han GS, Kim WH, Kim JP, Yoon DH, Song YH (2021) Innovative rapid synthesis design of water-stable solid-state Cs4PbBr6 perovskite luminescence materials for next generation display technology. Appl Surf Sci 542https://doi.org/10.1016/j.apsusc.2020.14869610.1016/j.apsusc.2020.148696 ↗
4. Dutta NS, Noel NK, Arnold CB (2020) Crystalline nature of colloids in methylammonium lead halide perovskite precursor inks revealed by cryo-electron microscopy. J Phys Chem Lett 11(15):5980–5986. https://doi.org/10.1021/acs.jpclett.0c0197510.1021/acs.jpclett.0c01975 ↗
5. Gan Z, Zheng F, Mao W, Zhou C, Chen W, Bach U, Tapping P, Kee TW, Davis JA, Jia B, Wen X (2019) The optical properties of Cs4PbBr 6-CsPbBr3 perovskite composites. Nanoscale 11(31):14676–14683. https://doi.org/10.1039/c9nr04787e10.1039/c9nr04787e ↗
6. Ge W, Shi J, Tian Y, Xu M, Wu Y, Li Y (2021) Core-shell CsPbBr3@Cs4PbBr6 nanocrystals dispersed in thermoplastic polyurethane as writeable heat-resistant fluorescent inks. J Alloys Compd 865. https://doi.org/10.1016/j.jallcom.2021.15876810.1016/j.jallcom.2021.158768 ↗
7. Ghosh J, Hossain M, Giri PK (2020) Origin and tunability of dual color emission in highly stable Mn doped CsPbCl3 nanocrystals grown by a solid-state process. J Colloid Interface Sci 564:357–370. https://doi.org/10.1016/j.jcis.2019.12.06610.1016/j.jcis.2019.12.066 ↗
8. Huang K, Peng L, Liu B, Li D, Ma Q, Zhang M, Xie R, Wang D, Yang W (2018) Water-borne perovskite quantum dot-loaded, polystyrene latex ink. Front Chem 6:453. https://doi.org/10.3389/fchem.2018.0045310.3389/fchem.2018.00453 ↗
9. Jiang G, Guhrenz C, Kirch A, Sonntag L, Bauer C, Fan X, Wang J, Reineke S, Gaponik N, Eychmuller A (2019) Highly LUMINESCENT AND WATER-RESISTANT CsPbBr 3-CsPb2Br5 perovskite nanocrystals coordinated with partially hydrolyzed poly(methyl methacrylate) and polyethylenimine. ACS Nano 13(9):10386–10396. https://doi.org/10.1021/acsnano.9b0417910.1021/acsnano.9b04179 ↗
10. Jin G, Zhang D, Pang P, Ye Z, Liu T, Xing G, Chen J, Ma D (2021) Boosting the performance of CsPbBr 3-based perovskite light-emitting diodes via constructing nanocomposite emissive layers. J Mater Chem C 9(3):916–924. https://doi.org/10.1039/d0tc05227b10.1039/d0tc05227b ↗
11. Kang B, Biswas K (2018) Exploring polaronic, excitonic structures and luminescence in Cs4PbBr 6/CsPbBr3. J Phys Chem Lett 9(4):830–836. https://doi.org/10.1021/acs.jpclett.7b0333310.1021/acs.jpclett.7b03333 ↗
12. Kang CY, Lin CH, Lin CH, Li TY, Huang Chen SW, Tsai CL, Sher CW, Wu TZ, Lee PT, Xu X, Zhang M, Ho CH, He JH, Kuo HC (2019) Highly efficient and stable white light‐emitting diodes using perovskite quantum dot paper. Adv Sci 1902230. https://doi.org/10.1002/advs.20190223010.1002/advs.201902230 ↗
13. Liang C, Li P, Gu H, Zhang Y, Li F, Song Y, Shao G, Mathews N, Xing G (2018) One‐step inkjet printed perovskite in air for efficient light harvesting. Solar RRL 2 (2). https://doi.org/10.1002/solr.20170021710.1002/solr.201700217 ↗
14. Ling Y, Tan L, Wang X, Zhou Y, Xin Y, Ma B, Hanson K, Gao H (2017) Composite perovskites of cesium lead bromide for optimized photoluminescence. J Phys Chem Lett 8(14):3266–3271. https://doi.org/10.1021/acs.jpclett.7b0130210.1021/acs.jpclett.7b01302 ↗
15. Li M, Zhang X, Yang P (2021b) Controlling the growth of a SiO2 coating on hydrophobic CsPbBr 3 nanocrystals towards aqueous transfer and high luminescence. Nanoscale 13(6):3860–3867. https://doi.org/10.1039/d0nr08325a10.1039/d0nr08325a ↗
16. Li P, Liang C, Bao B, Li Y, Hu X, Wang Y, Zhang Y, Li F, Shao G, Song Y (2018) Inkjet manipulated homogeneous large size perovskite grains for efficient and large-area perovskite solar cells. Nano Energy 46:203–211. https://doi.org/10.1016/j.nanoen.2018.01.04910.1016/j.nanoen.2018.01.049 ↗
17. Li R, Cai L, Zou Y, Xu H, Tan Y, Wang Y, Li J, Wang X, Li Y, Qin Y, Liang D, Song T, Sun B (2020b) High-efficiency perovskite light-emitting diodes with improved interfacial contact. ACS Appl Mater Interfaces 12(32):36681–36687. https://doi.org/10.1021/acsami.0c0751410.1021/acsami.0c07514 ↗
18. Li X, Wu Y, Zhang S, Cai B, Gu Y, Song J, Zeng H (2016) CsPbX3 quantum dots for lighting and displays: room-temperature synthesis, photoluminescence superiorities, underlying origins and white light-emitting diodes. Adv Func Mater 26(15):2435–2445. https://doi.org/10.1002/adfm.20160010910.1002/adfm.201600109 ↗
19. Li Y, Ma F, Zhao D, Lu F, Wang J, Cao S, Qian J, Zhou Y (2020a) Convenient synthesis of high-quality, all-inorganic lead halide perovskite nanocrystals for high purity monochrome QLED. Mater Technol 1–10. https://doi.org/10.1080/10667857.2020.178678210.1080/10667857.2020.1786782 ↗
20. Li Y, Qian J, Zhao D, Song R (2021a) Preparation of perovskite CsPb(BrxI1−x)3 quantum dots at room temperature. RSC Adv 11(30):18432–18439. https://doi.org/10.1039/d1ra02772g10.1039/d1ra02772g ↗
21. Li Z, Li P, Chen G, Cheng Y, Pi X, Yu X, Yang D, Han L, Zhang Y, Song Y (2020c) Ink engineering of inkjet printing perovskite. ACS Appl Mater Interfaces 12(35):39082–39091. https://doi.org/10.1021/acsami.0c0948510.1021/acsami.0c09485 ↗
22. Liu M, Zhao J, Luo Z, Sun Z, Pan N, Ding H, Wang X (2018) Unveiling solvent-related effect on phase transformations in CsBr–PbBr 2 system: coordination and ratio of precursors. Chem Mater 30(17):5846–5852. https://doi.org/10.1021/acs.chemmater.8b0053710.1021/acs.chemmater.8b00537 ↗
23. Pan A, Li Y, Wu Y, Yan K, Jurow MJ, Liu Y, He L (2019) Stable luminous nanocomposites of CsPbX3 perovskite nanocrystals anchored on silica for multicolor anti-counterfeit ink and white-LEDs. Mater Chem Front 3(3):414–419. https://doi.org/10.1039/c8qm00591e10.1039/c8qm00591e ↗
24. Pan A, Wang J, Jurow MJ, Jia M, Liu Y, Wu Y, Zhang Y, He L, Liu Y (2018) General strategy for the preparation of stable luminous nanocomposite inks using chemically addressable CsPbX3 peroskite nanocrystals. Chem Mater 30(8):2771–2780. https://doi.org/10.1021/acs.chemmater.8b0058710.1021/acs.chemmater.8b00587 ↗
25. Pan A, Yan L, Ma X, Wu Y, Zhang Y, Zhou G, He L (2020) Strongly luminescent and highly stable core-shell suprastructures from in-situ growth of CsPbBr3 perovskite nanocrystals in multidentate copolymer micelles. J Alloys Compd 844. https://doi.org/10.1016/j.jallcom.2020.15610210.1016/j.jallcom.2020.156102 ↗
26. Protesescu L, Yakunin S, Bodnarchuk MI, Krieg F, Caputo R, Hendon CH, Yang RX, Walsh A, Kovalenko MV (2015) Nanocrystals of cesium lead halide perovskites (CsPbX3, X = Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color gamut. Nano Lett 15(6):3692–3696. https://doi.org/10.1021/nl504877910.1021/nl5048779 ↗
27. Qin Z, Dai S, Hadjiev VG, Wang C, Xie L, Ni Y, Wu C, Yang G, Chen S, Deng L, Yu Q, Feng G, Wang ZM, Bao J (2019) Revealing the origin of luminescence center in 0D Cs4PbBr 6 perovskite. Chem Mater 31(21):9098–9104. https://doi.org/10.1021/acs.chemmater.9b0342610.1021/acs.chemmater.9b03426 ↗
28. Sun C, Gao Z, Liu H, Wang L, Deng Y, Li P, Li H, Zhang Z-H, Fan C, Bi W (2019) One stone, two birds: high-efficiency blue-emitting perovskite nanocrystals for LED and security ink applications. Chem Mater 31(14):5116–5123. https://doi.org/10.1021/acs.chemmater.9b0101010.1021/acs.chemmater.9b01010 ↗
29. Su Y, Zeng Q, Chen X, Ye W, She L, Gao X, Ren Z, Li X (2019) Highly efficient CsPbBr 3 perovskite nanocrystals induced by structure transformation between CsPbBr3 and Cs4PbBr6 phases. J Mater Chem C 7(25):7548–7553. https://doi.org/10.1039/c9tc01763a10.1039/c9tc01763a ↗
30. Su S, Shen J, Sun H, Tao J, Xu D, Wei T, Fan C, Wang Z, Sun C, Bi W (2021) Shape-controlled synthesis of Ag/Cs4PbBr6 Janus nanoparticles. Nanotechnology 32 (7). https://doi.org/10.1088/1361-6528/abb90510.1088/1361-6528/abb905 ↗
31. Tan Y, Zou Y, Wu L, Huang Q, Yang D, Chen M, Ban M, Wu C, Wu T, Bai S, Song T, Zhang Q, Sun B (2018) Highly luminescent and stable perovskite nanocrystals with octylphosphonic acid as a ligand for efficient light-emitting diodes. ACS Appl Mater Interfaces 10(4):3784–3792. https://doi.org/10.1021/acsami.7b1716610.1021/acsami.7b17166 ↗
32. Wang H, Yin X, Wang L (2018) Highly stable perovskite nanogels as inks for multicolor luminescent authentication applications. J Mater Chem C 6(43):11569–11574. https://doi.org/10.1039/c8tc04420a10.1039/c8tc04420a ↗
33. Wu Z, Wang P, Wu J, Wei J, Sun Y, Wang N, Zhao Z (2020) Ultra-stable phosphor of h-BN white graphene-loaded all-inorganic perovskite nanocrystals for white LEDs. J Lumin 219. https://doi.org/10.1016/j.jlumin.2019.11694110.1016/j.jlumin.2019.116941 ↗
34. Xu J, Huang W, Li P, Onken DR, Dun C, Guo Y, Ucer KB, Lu C, Wang H, Geyer SM, Williams RT, Carroll DL (2017) Imbedded nanocrystals of CsPbBr3 in Cs4 PbBr6 : kinetics, enhanced oscillator strength, and application in light-emitting diodes. Adv Mater 29 (43). https://doi.org/10.1002/adma.20170370310.1002/adma.201703703 ↗
35. Yang X, Li M, Jiang J, Ma L, Tang W, Xu C, Cai HL, Zhang FM, Wu XS (2021) Fabrication of CsPbBr3 films with high quality using a simple method. J Phys D Appl Phys 54 (15). https://doi.org/10.1088/1361-6463/abd71210.1088/1361-6463/abd712 ↗
36. Yoon YJ, Lee KT, Lee TK, Kim SH, Shin YS, Walker B, Park SY, Heo J, Lee J, Kwak SK, Kim G-H, Kim JY (2018) Reversible, full-color luminescence by post-treatment of perovskite nanocrystals. Joule 2(10):2105–2116. https://doi.org/10.1016/j.joule.2018.07.01210.1016/j.joule.2018.07.012 ↗
37. Zhang F, Shi Z, Li S, Ma Z, Li Y, Wang L, Wu D, Tian Y, Du G, Li X, Shan C (2019) Synergetic effect of the surfactant and silica coating on the enhanced emission and stability of perovskite quantum dots for anticounterfeiting. ACS Appl Mater Interfaces 11(31):28013–28022. https://doi.org/10.1021/acsami.9b0751810.1021/acsami.9b07518 ↗
38. Zeng P, Wei L, Zhao H, Zhang R, Chen H, Liu M (2020) Crystalline phase-controlled synthesis of regular and stable endotaxial cesium lead halide nanocrystals. J Mater Chem C 8(27):9358–9365. https://doi.org/10.1039/d0tc01604g10.1039/d0tc01604g ↗
39. Zeng Q, Du Y, Jiang J, Yu Q, Li Y (2021) Revealing the aging effect of metal-oleate precursors on the preparation of highly luminescent CsPbBr 3 nanoplatelets. J Phys Chem Lett 12(10):2668–2675. https://doi.org/10.1021/acs.jpclett.1c0030010.1021/acs.jpclett.1c00300 ↗
40. Zhihai W, Jiao W, Yanni S, Jun W, Yafei H, Pan W, Nengping W, Zhenfu Z (2019) Air-stable all-inorganic perovskite quantum dot inks for multicolor patterns and white LEDs. J Mater Sci 54(9):6917–6929. https://doi.org/10.1007/s10853-019-03382-210.1007/s10853-019-03382-2 ↗