Ultrahigh electric field-induced asymmetric strain in Mn-doped KNN piezoceramics sintered in reducing atmosphere
Source abstract
Abstract
Piezoelectric actuators are widely used industrial electronic devices. In recent years, driven by environmental concerns, lead-free piezoelectric materials, particularly KNN-based ceramics, have gained increasing attention. In this study, Mn-doped KNN piezoelectric ceramics were synthesized by the conventional solid-state reaction method and sintered in a reducing atmosphere. By employing a synergistic strategy involving defect dipoles and ferroelectric domain switching, a giant converse piezoelectric coefficient ( d 33 ∗ ) of 2676 pm/V and a strain of 0.67% are achieved in the KNNM ceramics under an electric field of 2.5 kV/mm. In our ceramic samples, no obvious strain enhancement attributable to electrobending is observed. The ceramic exhibits excellent thermal stability, with performance degradation of less than 10% from room temperature to 170 °C, and maintains favorable performance after 2 million fatigue cycles. Considering the combination of excellent piezoelectric properties, high temperature stability, superior fatigue resistance, and reduction resistance, KNNM ceramics are expected to facilitate the development of lead-free piezoelectric actuators compatible with base-metal internal electrodes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Requirements for the transfer of lead-free piezoceramics into application10.1016/j.jmat.2018.02.001 ↗
2. Isolated-oxygen-vacancy hardening in lead-free piezoelectrics10.1002/adma.202202558 ↗
3. Excellent strain properties in (K,Na)NbO3-based piezoceramics induced by lamination composite strategy10.1016/j.cej.2023.144763 ↗
4. Applications of lead-free piezoelectric materials10.1557/mrs.2018.180 ↗
5. Giant electric field-induced strain in lead-free piezoceramics10.1126/science.ade2964 ↗
6. Contribution of irreversible non-180° domain to performance for multiphase coexisted potassium sodium niobate ceramics10.1038/s41467-024-46800-z ↗
7. Ultrahigh electrobending deformation in lead-free piezoelectric ceramics via defect concentration gradient design10.1002/adma.202404682 ↗
8. Progress in high-strain perovskite piezoelectric ceramics10.1016/j.mser.2018.08.001 ↗
9. Perovskite lead-free dielectrics for energy storage applications10.1016/j.pmatsci.2018.12.005 ↗
10. Lead-free piezoceramics: status and perspectives10.1557/mrs.2018.181 ↗
11. Transferring lead-free piezoelectric ceramics into application10.1016/j.jeurceramsoc.2014.12.013 ↗
12. High-performance lead-free piezoelectrics with local structural heterogeneity10.1039/C8EE02758G ↗
13. Lead-free piezoceramics10.1038/nature03028 ↗
14. Mn-atomic-layered antiphase boundary enhanced ferroelectricity in KNN-based lead-free films10.1038/s41467-025-61170-w ↗
15. Technology transfer of lead-free (K, Na)NbO3-based piezoelectric ceramics10.1016/j.mattod.2019.04.016 ↗
16. Ferroelectric materials toward next-generation electromechanical technologies10.1126/science.adn4926 ↗
17. Shifting the phase boundary: potassium sodium niobate derivates10.1557/mrs.2018.178 ↗
18. Potassium-sodium niobate lead-free piezoelectric ceramics: recent advances and perspectives10.1007/s10854-015-3084-2 ↗
19. Emerging new phase boundary in potassium sodium-niobate based ceramics10.1039/C9CS00432G ↗
20. Ultrahigh electric-field-induced strain in KNN-based piezoelectric ceramics sintered in reducing atmosphere10.1111/jace.18652 ↗
21. Effects of a phase engineering strategy on the strain properties in KNN-based ceramics10.1039/C8TC06159A ↗
22. Recent development in lead-free perovskite piezoelectric bulk materials10.1016/j.pmatsci.2018.06.002 ↗
23. Structural origin of excellent fatigue resistance in KNN-based ceramics with multiphase coexistence10.1016/j.jeurceramsoc.2023.09.033 ↗
24. The role of adding Bi0.5A0.5ZrO3 in affecting orthorhombic-tetragonal phase transition temperature and electrical properties in potassium sodium niobate ceramics10.1016/j.actamat.2020.07.053 ↗
25. Ultrahigh performance in lead-free piezoceramics utilizing a relaxor slush polar state with multiphase coexistence10.1021/jacs.9b07188 ↗
26. The structural origin of enhanced piezoelectric performance and stability in lead free ceramics10.1039/C6EE03597C ↗
27. Domain engineering in bulk ferroelectric ceramics via mesoscopic chemical inhomogeneity10.1002/advs.202200998 ↗
28. Practical high-performance lead-free piezoelectrics: structural flexibility beyond utilizing multiphase coexistence10.1093/nsr/nwz167 ↗
29. Domain-wall engineering and topological defects in ferroelectric and ferroelastic materials10.1038/s42254-020-0235-z ↗
30. The formation and effect of defect dipoles in lead-free piezoelectric ceramics: a review
31. Ultrahigh electro-strain in acceptor-doped KNN lead-free piezoelectric ceramics via defect engineering10.1016/j.actamat.2020.08.073 ↗
32. Designing electromechanical metamaterial with full nonzero piezoelectric coefficients10.1126/sciadv.aax1782 ↗
33. Compositionally graded KNN-based multilayer composite with excellent piezoelectric temperature stability10.1002/adma.202109175 ↗
34. Giant electric field-induced strain with high temperature-stability in textured KNN-based piezoceramics for actuator applications10.1002/adfm.202214643 ↗
35. Defect dipole asymmetry response induces electrobending deformation in thin piezoceramics10.1103/PhysRevLett.133.186802 ↗
36. Distinguishing electrotensile strain and electrobending strain10.26599/JAC.2025.9221048 ↗
37. Defect dipole stretching enables ultrahigh electrostrain10.1126/sciadv.adn2829 ↗
38. Defect dipole-induced fatigue strain recoverability in lead-free piezoelectric ceramics10.1002/adfm.202306416 ↗
39. High electrostrain in a lead-free piezoceramic from a chemopiezoelectric effect10.1038/s41563-024-02092-8 ↗
40. Deciphering the effect of defect dipoles on the polarization and electrostrain behavior in perovskite ferroelectrics10.1021/acs.nanolett.4c03042 ↗
41. Defect dipole gradient design in (K,Na)NbO3-based piezoelectric ceramics enabling controllable ultrahigh bending deformation10.1016/j.jmst.2025.04.008 ↗
42. KNN-based piezoelectric ceramic multilayer actuators with Ni internal electrodes10.1111/jace.18969 ↗
43. Base metal Co-fired multilayer piezoelectrics10.3390/act5010008 ↗
44. Base-metal electrode-multilayer ceramic capacitors: past, present and future perspectives10.1143/JJAP.42.1 ↗
45. Base metal Co-fired (Na,K)NbO3 structures with enhanced piezoelectric performance10.1007/s10832-014-9899-z ↗
46. Defect engineering on phase structure and temperature stability of KNN-based ceramics sintered in different atmospheres10.1111/jace.15462 ↗
47. Design of p-type NKN-based piezoelectric ceramics sintered in low oxygen partial pressure by defect engineering10.1111/jace.17034 ↗
48. Domain structure of potassium-sodium niobate ceramics before and after poling10.1111/jace.13373 ↗
49. Ultra-large electromechanical deformation in lead-free piezoceramics at reduced thickness10.1039/D3MH01657A ↗
50. Superior piezoelectric properties in potassium-sodium piobate lead-free ceramics10.1002/adma.201601859 ↗
51. A high temperature stable piezoelectric strain of KNN-based ceramics10.1039/C8TA07908K ↗
52. Improved piezoelectricity of lead-based PNN-PIN-PT ternary ceramics via polymorphic nanodomain modulation10.1016/j.jeurceramsoc.2023.04.055 ↗
53. Piezoelectric properties and temperature sensitivity for CaZrO3 doped KNN-based ceramics sintered in reducing atmosphere10.1016/j.jallcom.2019.05.182 ↗
54. Large piezoelectricity in ternary lead-free single crystals10.1002/aelm.201900949 ↗
55. High strain response in ternary Bi0.5Na0.5TiO3–BaTiO3–Bi(Mn0.5Ti0.5)O3 solid solutions10.1039/C6RA08240H ↗
56. Electric field-induced ultrahigh strain and large piezoelectric effect in Bi1/2Na1/2TiO3-based lead-free piezoceramics10.1016/j.jeurceramsoc.2015.09.043 ↗
57. Ultrahigh-performance [001]-oriented porous PZT-5H single crystal grown by the solid state crystal growth method10.1016/j.jeurceramsoc.2023.05.021 ↗
58. Complete matrix and physical properties of [001]-poled rhombohedral 0.26Pb(In1/2Nb1/2)O3-0.43Pb(Mg1/3Nb2/3)O3-0.31PbTiO3 relaxor ferroelectric single-crystal10.1016/j.ceramint.2025.02.385 ↗
59. Giant strains in non-textured (Bi1/2Na1/2)TiO3-based lead-free ceramics10.1002/adma.201503768 ↗
60. Ultrahigh piezoelectric performance benefiting from quasi-isotropic local polarization distribution in complex lead-based perovskite10.1016/j.nanoen.2022.107910 ↗
61. Broad temperature plateau for high piezoelectric coefficient by embedding PNRs in singe-phase KNN-based ceramics10.1002/adfm.202414348 ↗
62. High piezoelectric properties and excellent thermal stability in PNN-modified lead zirconate titanate piezoceramics10.1111/jace.20643 ↗
63. Exceptional piezoelectricity and high electromechanical coupling coefficients in Eu3+-doped PMN-PZ-PT textured ceramics via synergistic heterogeneity engineering10.1039/D5TA04453G ↗
64. Simultaneously improving piezoelectric properties and temperature stability of Na0.5K0.5NbO3 (KNN)-based ceramics sintered in reducing atmosphere10.1007/s40145-021-0475-0 ↗
65. Improving fatigue properties, temperature stability and piezoelectric properties of KNN-based ceramics via sintering in reducing atmosphere10.1016/j.jeurceramsoc.2021.03.007 ↗
66. High piezoelectricity and stable output in BaHfO3 and (Bi0.5Na0.5)ZrO3 modified (K0.5Na0.5)(Nb0.96Sb0.04)O3 textured ceramics10.1016/j.actamat.2020.08.058 ↗
67. Temperature-insensitive (K,Na)NbO3-based lead-free piezoactuator ceramics10.1002/adfm.201203754 ↗
68. Enhanced electric-field-induced strains in (K,Na)NbO3 piezoelectrics from heterogeneous structures10.1016/j.mattod.2021.02.002 ↗