journal article·2025-11Open access

Effective long-term storage and repeatable mechanoluminescence of piezoelectrics LiNbO3:1%Pr3+, 0.5%Zn2+

Xiaoyu Yao, Lin Li, Wei Liu, Wenqi Wei, Minhong Jiang, Xiaojiang Mu, Jingtai Zhao, Guanghui Rao

Journal of Materiomics· Volume 11· Issue 6

Abstract

In this study, we investigated a novel multifunctional piezoelectric phosphor LiNbO 3 :1%Pr 3+ , 0.5%Zn 2+ , which exhibited outstanding mechanoluminescence (ML) characteristics due to the strategic incorporation of Zn 2+ . A dual-regulation mechanism is proposed by adjusting the charge transfer band (CTB) energy level position and optimizing the defect distribution, thus realizing high-brightness, long-term storage, and highly repeatable red emission in ML. The addition of Zn 2+ can lower the CTB energy level of the phosphor, which leads to the easier transfer of 3 P 0 electrons of Pr 3+ to the 1 D 2 energy level through the CTB band, thus enhancing the ML red emission. The introduction of a small amount of Zn 2+ effectively couple the trap structure with the piezoelectric properties of the material, significantly enhancing ML properties. Notably, the material exhibits excellent ML repeatability and long-term storage, maintaining a strong ML response even after 30 d. Density functional theory calculations of the phosphor confirmed that the doping of Zn 2+ in LiNbO 3 :1%Pr 3+ optimized the trap concentration and distribution, thereby improving the ML performance. This multifunctional material holds great potential for use in electromechanical and optoelectronic devices, contributing to the development of smart devices with broader applications. • Introduction of trace Zn 2+ ions effectively regulates the trap distribution in LiNbO 3 . • Lowering the CTB energy level enables easier transfer of Pr 3+ 3 P 0 electrons to 1 D 2 via CTB, boosting the ML red emission. • LNP:1%Pr 3+ ,0.5%Zn shows long-term ML storage, maintaining visible emission after 30 d in darkness without re-excitation. • LNP:1%Pr 3+ , 0.5%Zn maintains strong mechanoluminescence after 50 loading cycles without UV or sunlight re-excitation. • LNP: 1%Pr 3+ , 0.5%Zn shows high ML repeatability as intensity fully recovers after multiple UV or sunlight cycles.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Acoustic Wave Resonator Technologies · Luminescence Properties of Advanced Materials · Luminescence and Fluorescent Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Intense NIR mechanoluminescence from Al3+-regulated MgGa2O4: Cr3+10.1016/j.cej.2024.152155 ↗
2. Mechanoluminescence rebrightening the prospects of stress sensing: a review10.1002/adma.202005925 ↗
3. Effect of interface modification on mechanoluminescence-inorganic perovskite impact sensors10.3390/s23010236 ↗
4. Mechanoluminescence from an ion-irradiated single crystal of lithium niobium oxide10.1021/acs.jpclett.2c01182 ↗
5. Ultra-long-delay sustainable and short-term-friction stable mechanoluminescence in Mn2+-activated NaCa2GeO4F with centrosymmetric structure10.1016/j.cej.2020.126798 ↗
6. Shallow defects and variable photoluminescence decay times up to 280 μs in triple-cation perovskites10.1038/s41563-023-01771-2 ↗
7. Origin and control of blinking in quantum dots10.1038/nnano.2016.140 ↗
8. Thermoluminescence study of Eu3+ doped Na2Sr2Al2PO4Cl9 phosphor via doping of singly, doubly and triply ionized ions10.1016/j.ceramint.2019.08.242 ↗
9. Thermoluminescence study and evaluation of trapping parameters CaTiO3: RE (RE=Eu3+, Dy3+) phosphor for TLD applications10.1016/j.molstruc.2020.129129 ↗
10. Temperature/electric field induced photoluminescence-modulation effect in dysprosium-doped barium titanate ferroelectric ceramics10.1016/j.jmat.2023.11.016 ↗
11. Tuning electroluminescence performance in Pr-doped piezoelectric bulk ceramics and composites10.1016/j.jmat.2020.10.005 ↗
12. Anomalously bright single-molecule upconversion electroluminescence10.1038/s41467-024-45450-5 ↗
13. Magnetic-induced luminescence from flexible composite laminates by coupling magnetic field to piezophotonic effect10.1002/adma.201502015 ↗
14. Contact-separation-induced self-recoverable mechanoluminescence of CaF2:Tb3+/PDMS elastomer10.1038/s41467-024-46432-3 ↗
15. Contact electrification induced mechanoluminescence10.1016/j.nanoen.2022.106920 ↗
16. Artificial skin to sense mechanical stress by visible light emission10.1063/1.123510 ↗
17. Direct view of stress distribution in solid by mechanoluminescence10.1063/1.123865 ↗
18. Luminescence properties of Eu2+, Dy3+-doped Sr2MgSi2O7, and Ca2MgSi2O7 phosphors by solid-state reaction method10.1007/s11164-014-1767-6 ↗
19. Blue light emission from stress-activated CaYAl3O7:Eu10.1149/1.2890856 ↗
20. near-infrared mechanoluminescence from Cr3+-doped spinel nanoparticles for potential oral diseases detection10.1002/smll.202402352 ↗
21. Strong elastico-mechanoluminescence in diphase (Ba, Ca)TiO3: Pr3+ with self-assembled sandwich architectures10.1149/1.3496667 ↗
22. Controlling elastico-mechanoluminescence in diphase (Ba,Ca)TiO3 :Pr3+ by co-doping different rare earth ions10.1039/C4RA05894A ↗
23. Elastico-mechanoluminescence properties of Pr3+-doped BaTiO3–CaTiO3 diphase ceramics with water resistance behavior10.1016/j.ceramint.2011.05.102 ↗
24. Lithium niobate single crystals and powders reviewed—Part II10.3390/cryst10110990 ↗
25. Multilevel Static–Dynamic anticounterfeiting based on stimuli-responsive luminescence in a niobate structure10.1021/acsami.9b03562 ↗
26. LiNbO3:Pr3+: A multipiezo material with simultaneous piezoelectricity and sensitive piezoluminescence10.1002/adma.201606914 ↗
27. Pr3+-Doped Lithium niobate and sodium niobate with persistent luminescence and mechano-luminescence properties10.3390/app14072947 ↗
28. Effective repeatable mechanoluminescence in heterostructured Li1−xNaxNbO3 :Pr3+10.1002/smll.202103441 ↗
29. Intense mechanoluminescence, thermoluminescence and photoluminescence in Pr3+ doped K0.02Na0.98NbO3 ferroelectric phosphor10.1016/j.jlumin.2022.118866 ↗
30. Intense piezoluminescence in LiTaO3 phosphors doped with Pr3+ ions10.1016/j.ceramint.2019.01.173 ↗
31. Defect structure of zinc-doped LiNbO3 crystals in a wide range of dopant concentrations10.1134/S0020168519070173 ↗
32. Structure and optical properties of LiNbO3:ZnO (3.43–5.84 mol%) crystals10.1134/S002016851705017X ↗
33. Effect of Zn doping on the photoluminescence properties of LiNbO3 single crystals10.1016/j.optmat.2016.10.059 ↗
34. Cr3+ spectroscopy study in ZnO-codoped and Zn-in-diffused congruent LiNbO3:Cr crystals10.1007/s00340-008-3268-z ↗
35. Intrinsic energy conversions for photon-generation in piezo-phototronic materials: A case study on alkaline niobates10.1016/j.nanoen.2018.02.041 ↗
36. Optimization of persistent luminescence via dopant concentration in LiNbO310.1016/j.jlumin.2022.118753 ↗
37. Largely enhanced mechanoluminescence properties in Pr3+/Gd3+ co-doped LiNbO3 phosphors10.1016/j.ceramint.2018.05.193 ↗
38. Improving the thermal stability of Pr3+-based niobate phosphor by adjusting the energy level of intervalence charge transfer band
39. Emission quenching induced by intervalence charge transfer in Pr3+-or Tb3+-doped YNbO4 and CaNb2O610.1088/0953-8984/19/38/386230 ↗
40. Enhanced red emissions and higher quenching temperature based on the intervalence charge transfer in Pr3+ doped LiNbO3 with Mg2+ incorporation10.1364/OME.9.001062 ↗
41. Alkaline-earth-metal-ions blending enhanced self-activated and Bi3+-activated mechanoluminescence from Ca1–xBaxZnOS10.1002/adfm.202207881 ↗
42. Crystalline perfection, Raman, UV-VIS-NIR and prism coupler investigations on Cz-grown pure and Zn-doped LiNbO3 single crystals10.1039/c2ce06710b ↗
43. Trap depth engineering in MgGa2O4: Bi3+ for muticolor dynamic anti-counterfeiting, encryption and optical temperature sensing applications10.1016/j.cej.2022.135389 ↗
44. Continuous-wave photoluminescence excitation spectra of multiple narrow-stepped quantum wells: evidence for saturation of interface traps10.1063/1.107000 ↗