Enhanced energy storage properties and good stability of novel (1–x)Na0.5Bi0.5TiO3–xCa(Mg1/3Nb2/3)O3 relaxor ferroelectric ceramics prepared by chemical modification
Source abstract
Abstract
The increase in energy consumption and its collateral damage on the environment has encouraged the development of environment-friendly ceramic materials with good energy storage properties. In this work, (1–x)Na0.5Bi0.5TiO3-xCa(Mg1/3Nb2/3)O3 ceramics were synthesized by the solid-state reaction method. The 0.88Na0.5Bi0.5TiO3-0.12Ca(Mg1/3Nb2/3)O3 ceramic exhibited a high recoverable energy storage density of 8.1 J/cm3 and energy storage efficiency of 82.4% at 550 kV/cm. The introduction of Ca(Mg1/3Nb2/3)O3 reduced the grain size and increased the band gap, thereby enhancing the breakdown field strength of the ceramic materials. The method also resulted in good temperature stability (20–140 °C), frequency stability (1–200 Hz), and fatigue stability over 106 cycles. In addition, an ultrahigh power density of 187 MW/cm3 and a fast charge-discharge rate (t0.9 = 57.2 ns) can be obtained simultaneously. Finite element method analysis revealed that the decrease of grain size was beneficial to the increase of breakdown field strength. Therefore, the 0.88Na0.5Bi0.5TiO3-0.12Ca(Mg1/3Nb2/3)O3 ceramics resulted in high energy storage properties with good stability and were promising environment-friendly materials for advanced pulsed power systems applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (89)
Show source-provided references
1. Perovskite lead free dielectrics for energy storage applications10.1016/j.pmatsci.2018.12.005 ↗
2. Multilayer lead-free ceramic capacitors with ultrahigh energy density and efficiency
3. Realizing high-performance capacitive energy storage in lead-free relaxor ferroelectrics via synergistic effect design10.1016/j.jeurceramsoc.2021.09.051 ↗
4. Realizing excellent energy storage properties in Na0.5Bi0.5TiO3-based lead-free relaxor ferroelectrics10.1016/j.jeurceramsoc.2021.12.028 ↗
5. Tailoring ferroelectric polarization and relaxation of BNT-based lead-free relaxors for superior energy storage properties
6. Homogeneous/Inhomogeneous-structured dielectrics and their energy-storage performances10.1002/adma.201601727 ↗
7. Tailoring high energy density with superior stability under low electric field in novel (Bi0.5Na0.5)TiO3-based relaxor ferroelectric ceramics10.1016/j.jeurceramsoc.2020.05.078 ↗
8. Simultaneously achieved temperature-insensitive high energy density and efficiency in domain engineered BaTiO3-Bi(Mg0.5Zr0.5)O3 lead-free relaxor ferroelectrics10.1016/j.nanoen.2018.07.055 ↗
9. Antiferroelectrics for energy storage applications: a review10.1002/admt.201800111 ↗
10. Significantly enhanced energy storage density and efficiency of BNT-based perovskite ceramics via A-site defect engineering10.1016/j.ensm.2020.05.026 ↗
11. Non-intuitive concomitant enhancement of dielectric permittivity, breakdown strength and energy density in percolative polymer nanocomposites by trace Ag nanodots10.1039/C9TA02257K ↗
12. A Hybrid material approach toward solution-processable dielectrics exhibiting enhanced breakdown strength and high energy density10.1002/adfm.201501070 ↗
13. High-temperature poly (phthalazinone ether ketone) thin films for dielectric energy storage10.1021/am100146u ↗
14. Novel strontium titanate-based lead-free ceramics for high-energy storage applications10.1021/acssuschemeng.7b02203 ↗
15. Grain size engineered lead-free ceramics with both large energy storage density and ultrahigh mechanical properties10.1016/j.nanoen.2019.02.003 ↗
16. Enhancement of energy storage performance in lead-free barium titanate-based relaxor ferroelectrics through a synergistic two-step strategy design10.1016/j.cej.2022.134678 ↗
17. Energy storage performance of Na0.5Bi0.5TiO3-SrTiO3 lead-free relaxors modified by AgNb0.85Ta0.15O310.1016/j.cej.2020.127151 ↗
18. Linear-like lead-free relaxor antiferroelectric (Bi0.5Na0.5)TiO3-NaNbO3 with giant energy-storage density/efficiency and super stability against temperature and frequency10.1039/C8TA12232F ↗
19. High energy-storage performance and dielectric properties of antiferroelectric (Pb0.97La0.02)(Zr0.5Sn0.5–xTix)O3 ceramic10.1016/j.jallcom.2015.09.167 ↗
20. Ultra-high energy storage performance under low electric fields in Na0.5Bi0.5TiO3-based relaxor ferroelectrics for pulse capacitor applications10.1016/j.ceramint.2019.08.238 ↗
21. Relaxor properties of Ba0.9Bi0.067(Ti1−xZrx)O3 ceramics10.1016/j.solidstatesciences.2005.04.009 ↗
22. Optimized dielectric energy storage performance in ZnO-modified Bi0.5Na0.5TiO3-Sr0.7Bi0.2□0.1TiO3 ceramics with composite structure and element segregation10.1016/j.cej.2023.141449 ↗
23. A high-tolerance BNT-based ceramic with excellent energy storage properties and fatigue/frequency/thermal stability10.1016/j.ceramint.2019.08.019 ↗
24. Enhanced temperature stable dielectric property and energy-storage performance of (1–x)(0.66Bi0.5Na0.5TiO3-0.34Sr0.7Bi0.2TiO3)-xK0.5Nd0.5TiO3 lead-free relaxor electroceramics10.1016/j.ceramint.2020.06.100 ↗
25. Enhanced energy-storage performance with excellent stability under low electric fields in BNT-ST relaxor ferroelectric ceramics10.1039/C8TC04447C ↗
26. Grain-orientation-engineered multilayer ceramic capacitors for energy storage applications10.1038/s41563-020-0704-x ↗
27. Atomic-resolution electron microscopy of nanoscale local structure in lead-based relaxor ferroelectrics10.1038/s41563-020-0794-5 ↗
28. Bi-modified SrTiO3-based ceramics for high-temperature energy storage applications10.1111/jace.16844 ↗
29. Dielectric and electrical energy storage properties of BiFeO3-BaTiO3-SrTiO3 ternary bulk ceramics10.1007/s10854-021-06618-7 ↗
30. Large electrocaloric response and high energy-storage properties over a broad temperature range in lead-free NBT-ST ceramics10.1016/j.jeurceramsoc.2015.10.019 ↗
31. High energy storage density realized in Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramics at ultralow sintering temperature10.1016/j.jeurceramsoc.2020.07.067 ↗
32. Realizing ultra-high energy storage density of lead-free 0.76Bi0.5Na0.5TiO3-0.24SrTiO3-Bi(Ni2/3Nb1/3)O3 ceramics under low electric fields10.1016/j.cej.2021.129337 ↗
33. Energy storage performance of Na0.5Bi0.5TiO3 based lead-free ferroelectric ceramics prepared via non-uniform phase structure modification and rolling process10.1016/j.cej.2021.130475 ↗
34. Decreasing polar-structure size: achieving superior energy storage properties and temperature stability in Na0.5Bi0.5TiO3-based ceramics for low electric field and high-temperature applications10.1016/j.jeurceramsoc.2021.05.036 ↗
35. Novel Ca doped Sr0.7Bi0.2TiO3 lead-free relaxor ferroelectrics with high energy density and efficiency10.1016/j.jeurceramsoc.2020.01.006 ↗
36. Perovskite Srx(Bi1–xNa0.97–xLi0.03)0.5TiO3 ceramics with polar nano regions for high power energy storage10.1016/j.nanoen.2018.06.016 ↗
37. Relaxor behaviour and phase transition of perovskite ferroelectrics-type complex oxides (1–x)Na0.5Bi0.5TiO3-xCaTiO3 system
38. Large energy density with excellent stability in fine-grained (Bi0.5Na0.5)TiO3-based lead-free ceramics10.1016/j.jeurceramsoc.2019.05.056 ↗
39. Lead-free (1–x)Bi0.5Na0.5TiO3-xCaSnO3 ceramics with high thermal stability10.1016/j.jallcom.2022.168096 ↗
40. Enhanced breakdown strength and energy storage density of lead-free Bi0.5Na0.5TiO3-based ceramic by reducing the oxygen vacancy concentration10.1016/j.cej.2021.128921 ↗
41. Lone-pair-induced covalency as the cause of temperature- and field-induced instabilities in bismuth sodium titanate10.1002/adfm.201102758 ↗
42. Ferroelectric-quasiferroelectric-ergodic relaxor transition and multifunctional electrical properties in Bi0.5Na0.5TiO3-based ceramics10.1111/jace.15308 ↗
43. Superior energy storage properties and excellent stability achieved in environment-friendly ferroelectrics via composition design strategy10.1016/j.nanoen.2020.105012 ↗
44. Enhanced energy storage density of Sr0.7BixTiO3 lead-free relaxor ceramics via A-site defect and grain size tuning10.1016/j.cej.2021.129808 ↗
45. Enhanced energy storage performance of Bi0.5Na0.5TiO3-based ceramics via grain tuning and relaxor construction10.1016/j.cej.2022.140924 ↗
46. The tetragonal phase of Na0.5Bi0.5TiO3 - a new variant of the perovskite structure10.1107/S0108768100001166 ↗
47. Investigation of the structure and phase transitions in the novel A-site substituted distorted perovskite compound Na0.5Bi0.5TiO310.1107/S0108768101020845 ↗
48. Domain structure-dielectric property relationship in lead-free (1–x)Bi1/2Na1/2TiO3-xBaTiO3 ceramics10.1063/1.3514093 ↗
49. Resistance to amorphisation in Ca1–xLa2x/3TiO3 perovskites-a bulk ion-irradiation study10.1016/j.actamat.2019.09.006 ↗
50. Microstructural investigations and electric field-induced strain of (1–x)(Bi0.5Na0.5)TiO3-xBaTiO3 lead-free ferroelectric ceramics10.1080/10584587.2013.849558 ↗
51. Phase evolution in (1–x)(Na0.5Bi0.5)TiO3-xSrTiO3 solid solutions: a study focusing on dielectric and ferroelectric characteristics10.1016/j.jmat.2020.05.005 ↗
52. On the phase identity and its thermal evolution of lead free (Bi1/2Na1/2)TiO3-6mol% BaTiO310.1063/1.3645054 ↗
53. Realizing high comprehensive energy storage performances of BNT-based ceramics for application in pulse power capacitors10.1016/j.jeurceramsoc.2020.11.049 ↗
54. Coexistence of three ferroelectric phases and enhanced piezoelectric properties in BaTiO3-CaHfO3 leadfree ceramics10.1016/j.jeurceramsoc.2017.09.023 ↗
55. Enhanced energy storage properties with excellent stability in BST-BLZS relaxor ceramics10.1016/j.ceramint.2022.03.233 ↗
56. Enhanced energy storage performances of (Sr0.7Bi0.2)TiO3 ceramics through highly polarized Ba ions10.1016/j.jallcom.2022.164672 ↗
57. Excellent energy storage and hardness performance of Sr0.7Bi0.2TiO3 ceramics fabricated by solution combustion-synthesized nanopowders10.1016/j.cej.2022.136330 ↗
58. Superior energy-storage capacitors with simultaneously giant energy density and efficiency using nanodomain engineered BiFeO3-BaTiO3-NaNbO3 lead-free bulk ferroelectrics
59. MnO2-modified lead-free NBT-based relaxor ferroelectric ceramics with improved energy storage performances10.1016/j.ceramint.2021.04.227 ↗
60. Critical electric field stabilizing structure of Al2O3/TiO2/Al2O3 thin film for achieving high energy density10.1016/j.ceramint.2023.02.096 ↗
61. Significant improvement in electrical characteristics and energy storage performance of NBT based ceramics10.1016/j.ceramint.2022.06.009 ↗
62. Na0.5Bi0.5)0.7Sr0.3TiO3 modified by Bi(Mg2/3Nb1/3)O3 ceramics with high energy-storage properties and an ultrafast discharge rate10.1039/C9TC06218A ↗
63. Significantly enhanced energy-storage properties of Bi0.47Na0.47Ba0.06TiO3-CaHfO3 ceramics by introducing Sr0.7Bi0.2TiO3 for pulse capacitor application10.1016/j.cej.2021.132165 ↗
64. The effect of rare-earth oxides on the energy storage performances in BaTiO3 based ceramics10.1016/j.ceramint.2022.02.299 ↗
65. Enhanced strain and electrostrictive properties in lead-free BNT-based ceramics via rare earth doping10.1016/j.jmat.2021.08.002 ↗
66. Enhancement of energy storage performance in NaNbO3 and Sm3+ modified BNT-based ceramics10.1016/j.ceramint.2022.08.056 ↗
67. Effect of introducing Sr2+/Hf4+ on phase structures, bandgaps, and energy storage performance in Bi0.47Na0.47Ba0.06TiO3-based ferroelectric ceramic10.1016/j.ceramint.2023.02.190 ↗
68. Highly-reliable dielectric capacitors with excellent comprehensive energy-storage properties using Bi0.5Na0.5TiO3-based relaxor ferroelectric ceramics10.1016/j.jeurceramsoc.2023.01.005 ↗
69. Enhanced energy storage performance of eco-friendly BNT-based relaxor ferroelectric ceramics via polarization mismatch-reestablishment and viscous polymer process10.1016/j.ceramint.2021.11.197 ↗
70. (1–x)Bi0.5Na0.47Li0.03TiO3-xNaNbO3 lead-free ceramics with superior energy storage performances and good temperature stability10.1016/j.ceramint.2022.05.118 ↗
71. Excellent energy-storage performance in Bi0.5Na0.5TiO3-based lead-free composite ceramics via introducing pyrochlore phase Sm2Ti2O710.1016/j.cej.2023.142992 ↗
72. Nanoscale grain sizes in BNT-based ceramics with superb energy storage performances via coating boron nitride nanosheets10.1016/j.cej.2022.140524 ↗
73. Achieving high energy storage performance by LaMg0.5Ti0.5O3 modification of multiphase engineered Bi0.5Na0.5TiO3-based ceramics10.1016/j.ceramint.2023.01.220 ↗
74. Enhanced energy storage efficiency with superior thermal stability under low electric field and large electric field driven strain in environment-friendly Bi0.5Na0.5TiO3 based ferroelectric modified with LiNbO310.1016/j.jallcom.2023.169181 ↗
75. Enhanced energy storage properties and dielectric stabilities in BNT-based ceramics via multiphase and dielectric peak broadening engineering10.1016/j.matchemphys.2022.126542 ↗
76. Simultaneously optimizing both energy storage density and efficiency in a novel lead-free relaxor antiferroelectrics10.1016/j.jeurceramsoc.2020.03.070 ↗
77. Outstanding energy-storage and charge-discharge performances in Na0.5Bi0.5TiO3 lead-free ceramics via linear additive of Ca0.85Bi0.1TiO310.1016/j.cej.2022.135065 ↗
78. Ultrahigh dielectric breakdown strength and excellent energy storage performance in lead-free barium titanate-based relaxor ferroelectric ceramics via a combined strategy of composition modification, viscous polymer processing, and liquid-phase sintering10.1016/j.cej.2020.125625 ↗
79. (1–x)[0.90NN- 0.10Bi(Mg2/3Nb1/3)O3]-x(Bi0.5Na0.5)0.7Sr0.3TiO3 ceramics with core-shell structures: a pathway for simultaneously achieving high polarization and breakdown strength10.1016/j.nanoen.2022.107577 ↗
80. Bi0.5Na0.5)TiO3-based relaxor ferroelectrics with medium permittivity featuring enhanced energy-storage density and excellent thermal stability10.1016/j.cej.2021.131989 ↗
81. Superior energy storage capability and stability in lead-free relaxors for dielectric capacitors utilizing nanoscale polarization heterogeneous regions10.1002/smll.202206662 ↗
82. Electroceramics for high-energy density capacitors: current status and future perspectives10.1021/acs.chemrev.0c01264 ↗
83. Large energy-storage density in transition-metal oxide modified NaNbO3-Bi(Mg0.5Ti0.5)O3 lead-free ceramics through regulating the antiferroelectric phase structure10.1039/D0TA02285C ↗
84. Recent progress in the nanoscale evaluation of piezoelectric and ferroelectric properties via scanning probe microscopy10.1002/advs.201901391 ↗
85. Relaxor antiferroelectric-like characteristic boosting enhanced energy storage performance in eco-friendly (Bi0.5Na0.5)TiO3-based ceramics10.1016/j.jeurceramsoc.2022.04.057 ↗
86. Ultrahigh energy storage density in (Bi0.5Na0.5)0.65Sr0.35TiO3-based lead-free relaxor ceramics with excellent temperature stability10.1016/j.nanoen.2022.107276 ↗
87. Nanoscale bubble domains with polar topologies in bulk ferroelectrics10.1038/s41467-021-23863-w ↗
88. Enhanced energy storage performance in Sr0.7La0.2Zr0.15Ti0.85O3-modified Bi0.5Na0.5TiO3 ceramics via constructing local phase coexistence
89. Realizing high comprehensive energy storage performance in lead-free bulk ceramics via designing an unmatched temperature range10.1039/C9TA11314B ↗