journal article·2013-06

A Ni-free ZrCuFeAlAg bulk metallic glass with potential for biomedical applications

Yan Liu, Yi-Mei Wang, Hui-Fang Pang, Qiu Zhao, Lin Liu

Acta Biomaterialia· Volume 9· Issue 6
Publisher page

Abstract

The mechanical properties and biocompatibility of an Ni-free Zr-based bulk metallic glass (BMG) Zr60.14Cu22.31Fe4.85Al9.7Ag3 were investigated in detail to evaluate its potential as a biomaterial. The BMG was found to have a low Young's modulus of 82±1.9GPa, a high strength of 1720±28MPa and a high fracture toughness of 94±19MPam(1/2), as well as good fatigue strength over 400MPa. The corrosion behavior of the alloy was investigated in simulated body fluid (SBF) by electrochemical measurements, which indicates that the Zr-based BMG has a better corrosion resistance than pure Zr and Ti6Al4V. X-ray photoelectron spectroscopy analysis revealed that the passive film formed on the BMG surface is enriched in Al- and Zr-oxides, which could account for the good corrosion resistance of the BMG. On the other hand, metal ion release of the BMG in SBF was determined by inductively coupled plasma mass spectrometry after the BMG was immersed in SBF at 37°C for 30days, showing a ppb (ngml(-1)) level of metal ion release. The in vitro test via cell culture indicates that the BMG exhibits a cytotoxicity of Grade 0-1, which is as good as Ti6Al4V alloy. Cell adhesion morphological analysis shows that the cells were flattened and well spread out on the surfaces of the BMG, showing that the BMG had good biocompatibility. The combination of good mechanical properties and biocompatibility demonstrates that the Ni-free Zr-based BMG studied in this work is a good candidate for a new type of load-bearing biomedical material.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Titanium alloys in total joint replacement – a materials science perspective10.1016/S0142-9612(97)00146-4 ↗
2. The 9 and 10year results of the low friction arthroplasty of the hip
3. Malchau H, Herberts P. Prognosis of total hip replacement. Revision and re-revision rate in THR: a revision-risk study of 148,359 primary operations. In: Presented at the 65th annual meeting of the American academy of orthopaedic surgeons, New Orleans: National Hip Arthroplasty Registry; 1998. p. 19–23.
4. Symposium on surface replacement arthroplasty of the hip anatomic considerations10.1016/S0030-5898(20)30228-5 ↗
5. Role of loads and prosthesis material properties on the mechanics of the proximal femur after total hip arthroplasty10.1002/jor.1100100314 ↗
6. Stress analysis of the proximo-medial femur after total hip replacement10.1016/0141-5425(90)90020-N ↗
7. The relationship between stress shielding and bone resorption around total hip stems and the effects of flexible materials10.1097/00003086-199201000-00014 ↗
8. Determinants of stress shielding: design vs. materials vs. interface10.1097/00003086-199201000-00020 ↗
9. Comparison of metal release from various metallic biomaterials in vitro10.1016/j.biomaterials.2004.02.005 ↗
10. Implications of metallic corrosion in total knee arthroplasty10.1097/00003086-199110000-00004 ↗
11. A method for production and characterisation of metal wear particles10.1002/jor.1100110612 ↗
12. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
13. Bulk glass-forming metallic alloys: science and technology10.1557/S0883769400053252 ↗
14. Bulk metallic glasses
15. Corrosion and related mechanical properties of bulk metallic glasses10.1557/jmr.2007.0051 ↗
16. Amorphous metals for hard-tissue prosthesis10.1007/s11837-010-0038-2 ↗
17. Bulk metallic glasses for biomedical applications10.1007/s11837-009-0128-1 ↗
18. Effect of chloride ion on the anodic polarization behavior of the Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution10.1016/S0010-938X(00)00022-6 ↗
19. Effect of pH on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in a phosphate-buffered solution10.1016/S0010-938X(00)00056-1 ↗
20. Effect of surface finishing and dissolved oxygen on the polarization behavior of Zr65Al7.5Ni10Cu17.5 amorphous alloy in phosphate buffered solution10.1016/S0010-938X(00)00043-3 ↗
21. Horton JA, Parsell DE. Biomedical potential of a zirconium-based bulk metallic glass. Material research society symposium proceedings, 2002; http://dx.doi.org/10.1557/PROC-754-CC1.5.10.1557/PROC-754-CC1.5 ↗
22. Fretting fatigue properties of Zr-based bulk amorphous alloy in phosphate buffered saline solution10.2320/jinstmet.69.481 ↗
23. Effect of silver, copper, mercury, and nickel ions on cellular proliferation during extended, low-dose exposures10.1002/1097-4636(200011)52:2<360::AID-JBM16>3.0.CO;2-B ↗
24. Evaluation of the carcinogenic risks to humans associated with surgical implants and other foreign bodies – a report of an IARC monographs programme meeting10.1016/S0959-8049(99)00312-3 ↗
25. Bulk metallic glass formation in Zr–Cu–Fe–Al alloys10.1063/1.1948513 ↗
26. Cytotoxicity of Zr based bulk metallic glasses10.1016/j.intermet.2005.11.003 ↗
27. MgZnCa glasses without clinically observable hydrogen evolution for biodegradable implants10.1038/nmat2542 ↗
28. In vivo performance and structural relaxation of biodegradable bone implants made from MgZnCa bulk metallic glasses10.1002/adem.201180200 ↗
29. Qiu CL, Liu L, Sun M, Zhang SM. The effect of Nb addition on mechanical properties, corrosion behavior, and metal ion release of ZrAlCuNi bulk metallic glasses in artificial body fluid. J Biomed Mater Res 2005;75A:950–956.10.1002/jbm.a.30502 ↗
30. A novel Ni-free Zr-based bulk metallic glass with enhanced plasticity and good biocompatibility10.1016/j.scriptamat.2006.06.018 ↗
31. Enhanced glass forming ability and plasticity of a Ni-free Zr-based bulk metallic glass10.1016/j.jallcom.2009.08.030 ↗
32. Deformation behavior, corrosion resistance, and cytotoxicity of Ni-free Zr-based bulk metallic glasses10.1002/jbm.a.31425 ↗
33. Biocompatibility of Ni-free Zr-based bulk metallic glasses10.1016/j.intermet.2008.07.022 ↗
34. Surface modification and biocompatibility of Ni-free Zr-based bulk metallic glass10.1016/j.scriptamat.2007.09.040 ↗
35. Bio-activation of Ni-free Zr-based bulk metallic glass by surface modification10.1016/j.intermet.2010.02.039 ↗
36. Tribological characterisation of Zr based bulk metallic glass in simulated physiological medium10.1080/14786435.2011.589867 ↗
37. Tada · 1973
38. Fracture toughness and notched toughness of bulk amorphous alloy: Zr–Ti–Ni–Cu–Be10.1016/S1359-6462(98)00102-X ↗
39. Deformation and fracture toughness of a bulk amorphous Zr–Ti–Ni–Cu–Be alloy10.1016/S0966-9795(99)00137-5 ↗
40. Lewandowski JJ. Effects of annealing and changes in stress state on fracture toughness of bulk metallic glass. Mater Trans 2001;42(4):633–637.10.2320/matertrans.42.633 ↗
41. Tough Fe-based bulk metallic glasses10.1063/1.2890489 ↗
42. Compressive plasticity and toughness of a Ti-based bulk metallic glass10.1016/j.actamat.2009.11.013 ↗
43. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
44. American Society for Testing and Materials. ASTM-G31-72 standard practice for laboratory immersion corrosion testing of metals. In: Annual book of ASTM standards, Philadelphia, PA: ASTM; 2004.
45. ISO-10993e5: biological evaluation of medical devices E. Part 5. Tests for cytotoxicity: In vitro methods, Arlington, VA: ANSI/AAMI; 1999.
46. Test environments and mechanical properties of zr-base bulk amorphous alloys10.1007/s11661-998-0004-6 ↗
47. A damage-tolerant glass10.1038/nmat2930 ↗
48. Fracture toughness of Zr55Al10Ni5Cu30 bulk metallic glass by 3-point bend testing10.2320/matertrans.46.1725 ↗
49. Fracture toughness study of new Zr-based Be-bearing bulk metallic glasses10.1016/j.scriptamat.2008.09.001 ↗
50. Notch toughness of Cu-based bulk metallic glasses10.1016/j.scriptamat.2009.03.024 ↗
51. Mechanical properties of biomedical titanium alloys10.1016/S0921-5093(97)00806-X ↗
52. Brown Jr WF. Aerospace structural metals handbook. In: CINDAS/USAF CRDA handbooks operation, West Lafayette: Purdue University; 2001.
53. Georgette FS, Davidson JA. The effect of HIPing on the fatigue and tensile strength of a cast, porous-coated Co–Cr–Mo alloy. J Biomed Mater Res 1986;20(8):1229–1248.10.1002/jbm.820200812 ↗
54. Fatigue of a Zr–Ti–Cu–Ni–Be bulk amorphous metal: stress/life and crack-growth behavior10.1016/S1359-6462(97)00522-8 ↗
55. Effects of loading modes on the fatigue behavior of Zr-based bulk-metallic glasses10.1016/j.jallcom.2008.07.228 ↗
56. Effects of free volume changes and residual stresses on the fatigue and fracture behavior of a Zr–Ti–Ni–Cu–Be bulk metallic glass10.1016/j.actamat.2007.10.007 ↗
57. Fatigue and fracture behavior of (Zr58Ni13.6Cu18Al10.4)99Nb1 bulk-amorphous alloy10.1016/j.intermet.2006.01.044 ↗
58. Four-point-bending-fatigue behavior of the Zr-based Vitreloy 105 bulk metallic glass10.1016/j.msea.2007.05.066 ↗
59. Stress-life fatigue behavior and fracture-surface morphology of a Cu-based bulk-metallic glass10.1557/jmr.2007.0052 ↗
60. Coarse slip model of fatigue10.1016/0001-6160(69)90099-6 ↗
61. Newman Jr JC, Raju IS. Stress intensity factor equations for cracks in three-dimensional finite bodies subjected to tension and bending loads. NASA Technical Memorandum, 1983, 85793.10.1520/STP37074S ↗
62. ASTM-G102-89. Standard practice for calculation for corrosion rates and related information from electrochemical measurements. In: Annual book of ASTM standards, Philadephia, PA: American Society for Testing and Materials; 1999.
63. http://www.nist.gov/srd/index.cfm.
64. XPS determination and the compositions of alloy surface and surface oxides on mechanically polished iron–chromium alloys10.1016/0010-938X(77)90067-1 ↗
65. Cytotoxicity evaluation of 43 metal salts using murine fibroblasts and osteoblastic cells10.1002/(SICI)1097-4636(199802)39:2<331::AID-JBM22>3.0.CO;2-E ↗
66. Fatigue of biomaterials: hard tissues10.1016/j.ijfatigue.2009.08.007 ↗
67. Fatigue coaxing experiments on a Zr-based bulk-metallic glass10.1016/j.scriptamat.2009.12.016 ↗
68. Microbiologically influenced corrosion of 304 stainless steel by aerobic Pseudomonas NCIMB 2021 bacteria: AFM and XPS study10.1016/j.corsci.2006.07.003 ↗
69. Bio-corrosion study on zirconium-based bulk-metallic glasses10.1016/j.intermet.2008.07.020 ↗
70. Cytotoxicity of copper ions released from metal – variation with the exposure period and concentration gradients10.1385/BTER:102:1-3:129 ↗
71. The response of macrophages to a Cu–Al–Ni shape memory alloy10.1177/0885328209354613 ↗
72. Relationship between microstructure, cytotoxicity and corrosion properties of a Cu–Al–Ni shape memory alloy10.1016/j.actbio.2009.06.027 ↗
73. Copper induces apoptosis in BA/F3beta cells: Bax, reactive oxygen species, and NFkappaB are involved10.1002/1097-4652(200008)184:2<161::AID-JCP3>3.0.CO;2-N ↗
74. Oxidative mechanisms in the toxicity of metal ions10.1016/0891-5849(94)00159-H ↗
75. In vitro and in vivo evaluation of the surface bioactivity of a calcium phosphate coated magnesium alloy10.1016/j.biomaterials.2008.12.001 ↗