Insights into heat treatments of biodegradable Mg-Y-Nd-Zr alloys in clinical settings: Unveiling roles of β' and β1 nanophases and latent in vivo hydrogen evolution
Source abstract
Abstract
Heat treatment serves as a viable strategy to effectively mitigate the intense corrosion of biodegradable WE43 alloys. However, limited comprehension of the passivation mechanisms underlying heat treatment and the dilemma to quantitatively examine the evolution of hydrogen gas in vivo introduce uncertainties in designing heat treatments for developing clinically applicable WE43. This work aims to advance this knowledge by applying cutting-edge atom probe tomography to provide atomic-scale insights into the passivation roles of rare earth (RE)-rich β 1 (Mg 3 (Y, Nd)) and β' (Mg 12 NdY) nanophases induced by T6 heat treatment at 250 °C, and employing machine learning-based image analysis techniques to quantitatively unveil WE43’s in vivo gas evolution during a 12-week implantation. It was found that nanosized β 1 and β' phases can effectively improve WE43′s corrosion resistance by inducing an accelerated passivation effect on the surface and confining the distribution of hydrogen ions in the matrix. Female rats presented slightly higher corrosion rates than male rats in weeks 1 and 4 but lower hydrogen gas volumes in vivo , while male rats possessed a superior ability to metabolise hydrogen gas in vivo . Notably, a latent gas evolution against the corrosion rates was found which peaked at week 4 and subsided at week 12 despite the gradually decreased corrosion rates from week 1 to 12. This study offers insights for engineering heat treatments to develop clinically applicable WE43 with acceptable corrosion rates and in vivo gas generation at various implantation stages. The study aimed to reveal the role of β 1 and β' nanophases on the good corrosion resistance of WE43. The influence of these nanophases on WE43′s corrosion performance has not been totally understood. Similarly, the understanding of hydrogen gas evolution as it relates to the magnesium implant's corrosion rate lacks clarity. Atom probe tomography (APT) indicates β 1 and β' nanophases trap hydrogen, removing H 2 from the lattice and disabling its catalytic role in Mg oxidation. Machine learning-aided analyses of computed tomography (CT) scan images indicate latent gas evolution, contradicting the monotonic in vivo H 2 evolution that is widely accepted.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Hydrogen Storage and Materials · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. Global, regional, and national burden of bone fractures in 204 countries and territories, 1990-2019: a systematic analysis from the Global Burden of Disease Study 201910.1016/S2666-7568(21)00172-0 ↗
2. UDo Health, H. Services, Bone health and osteoporosis: a report of the Surgeon General, Rockville, MD: US Department of health and human Services, office of the surgeon General 87 (2004).
3. A systematic review of the use of titanium versus stainless steel implants for fracture fixation10.1097/OI9.0000000000000138 ↗
4. Biodegradable shape memory alloys: progress and prospects10.1016/j.biomaterials.2021.121215 ↗
5. , Biodegradable metals10.1016/j.mser.2014.01.001 ↗
6. Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces
7. Addressing the slow corrosion rate of biodegradable Fe-Mn: current approaches and future trends10.1016/j.cossms.2020.100822 ↗
8. Exploring the influence of biologically relevant ions on the corrosion behavior of biodegradable zinc in physiological fluids10.1021/acsbiomaterials.2c00901 ↗
9. The influence of alloying and fabrication techniques on the mechanical properties, biodegradability and biocompatibility of zinc: a comprehensive review10.1016/j.actbio.2019.01.035 ↗
10. Progress of biodegradable metals10.1016/j.pnsc.2014.08.014 ↗
11. Investigating Mg biocorrosion in vitro: lessons learned and recommendations
12. Biodegradable Mg alloys for orthopedic implants – a review10.1016/j.jma.2021.06.024 ↗
13. Microstructural analysis of the improved creep resistance of a die-cast magnesium–aluminium–rare earth alloy by strontium additions10.1016/j.scriptamat.2008.09.013 ↗
14. The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys10.1007/s11661-004-0099-3 ↗
15. Novel magnesium alloys developed for biomedical application: a review10.1016/j.jmst.2013.02.005 ↗
16. 1 - Metallic biomaterials: state of the art and new challenges
17. Biodegradable magnesium alloy WE43 porous scaffolds fabricated by laser powder bed fusion for orthopedic applications: process optimization, in vitro and in vivo investigation
18. An in vitro and in vivo characterization of fine WE43B magnesium wire with varied thermomechanical processing conditions
19. In vivo corrosion of four magnesium alloys and the associated bone response10.1016/j.biomaterials.2004.09.049 ↗
20. Improving corrosion resistance of additively manufactured WE43 magnesium alloy by high temperature oxidation for biodegradable applications
21. Magnesium-based compression screws: a novelty in the clinical use of implants10.1007/s11837-015-1773-1 ↗
22. In Vivo Evaluation of Mg–5%Zn–2%Nd Alloy as an Innovative Biodegradable Implant Material10.1007/s10439-019-02355-5 ↗
23. Effect of Microstructure on Corrosion Behavior of WE43 Magnesium Alloy in As Cast and Heat-Treated Conditions10.3390/met10111552 ↗
24. Microstructure, mechanical, corrosion, and ignition properties of WE43 alloy prepared by different processes
25. Linking the microstructure of a heat-treated WE43 Mg alloy with its corrosion behavior10.1016/j.corsci.2015.09.005 ↗
26. The influence of strain rate and annealing heat treatments on the corrosion and mechanical properties of WE43 and Zn7Ag biodegradable wires for application in soft tissue reconstructions
27. Influence of heat treatment on microstructure, mechanical and corrosion behavior of WE43 alloy fabricated by laser-beam powder bed fusion
28. In vivo study on biodegradable magnesium alloys: bone healing around WE43 screws10.1177/0885328217743321 ↗
29. WE43 and WE43-T5 Mg alloys screws tested in-vitro cellular adhesion and differentiation assay and in-vivo histomorphologic analysis in an ovine model10.1177/0885328220956788 ↗
30. In Vivo Analysis of a Biodegradable Magnesium Alloy Implant in an Animal Model Using Near-Infrared Spectroscopy10.3390/s23063063 ↗
31. In vitro and in vivo evaluation of novel biodegradable Mg-Ag-Y alloys for use as resorbable bone fixation implant10.1002/jbm.a.36397 ↗
32. The effect of hydrogen gas evolution of magnesium implant on the postimplantation mortality of rats10.1016/j.jot.2015.08.003 ↗
33. In Vivo Corrosion Behavior of Biodegradable Magnesium Alloy by MAF Treatment
34. Control of biodegradation of biocompatable magnesium alloys10.1016/j.corsci.2007.01.001 ↗
35. Mechanical Properties, Biodegradation, and Biocompatibility of Ultrafine Grained Magnesium Alloy WE4310.3390/ma12213627 ↗
36. In vivo assessment of the host reactions to the biodegradation of the two novel magnesium alloys ZEK100 and AX30 in an animal model10.1186/1475-925X-11-14 ↗
37. Machine learning driven instance segmentation providing new porosity insights into wire arc directed energy deposited Ti-22V-4Al
38. Influence of aggressive ions on the degradation behavior of biomedical magnesium alloy in physiological environment10.1016/j.actbio.2008.05.014 ↗
39. Effect of pH on the in vitro corrosion rate of magnesium degradable implant material10.1016/j.msec.2010.04.003 ↗
40. A. International
41. A. International
42. Atom probe tomography10.1038/s43586-021-00047-w ↗
43. The influence of two common sterilization techniques on the corrosion of Mg and its alloys for biomedical applications
44. ISO 11137-1:2006 Sterilization of health care products — Radiation Part 1: requirements for development, validation and routine control of a sterilization process for medical devices Amendment 1
45. Rates of in vivo (arterial) and in vitro biocorrosion for pure magnesium10.1002/jbm.a.35179 ↗
46. Assessing the degradation performance of ultrahigh-purity magnesium in vitro and in vivo10.1016/j.corsci.2014.09.008 ↗
47. Long-term in vivo degradation behavior and near-implant distribution of resorbed elements for magnesium alloys WZ21 and ZX5010.1016/j.actbio.2016.06.025 ↗
48. Magnesium alloys for temporary implants in osteosynthesis: in vivo studies of their degradation and interaction with bone10.1016/j.actbio.2011.11.008 ↗
49. ISO, Evaluation of Medical Devices Part 6: tests for local effects after implantation, ISO 10993-6, International Organization for Standardization, Geneva 2007.
50. 2004
51. 2008
52. The in vivo and in vitro corrosion of high-purity magnesium and magnesium alloys WZ21 and AZ9110.1016/j.corsci.2013.06.019 ↗
53. High-strength low-alloy (HSLA) Mg–Zn–Ca alloys with excellent biodegradation performance10.1007/s11837-014-0875-5 ↗
54. The influence of biodegradable magnesium implants on the growth plate
55. In vivo degradation performance of micro-arc-oxidized magnesium implants: a micro-CT study in rats10.1016/j.actbio.2012.09.017 ↗
56. Microstructure and mechanical properties of WE43 magnesium alloy fabricated by direct-chill casting10.1016/j.msea.2016.11.009 ↗
57. Microstructures and mechanical properties of the age hardened Mg–4.2Y–2.5Nd–1Gd–0.6Zr (WE43) microalloyed with Zn10.1016/j.jma.2014.01.010 ↗
58. Influence of fine-grain and solid-solution strengthening on mechanical properties and in vitro degradation of WE43 alloy10.1088/1748-6041/9/1/015014 ↗
59. Effects of microstructure on the torsional properties of biodegradable WE43 Mg alloy10.1016/j.jmst.2020.04.003 ↗
60. Hardening precipitation in a Mg–4Y–3RE alloy10.1016/S1359-6454(03)00391-4 ↗
61. Characterisation of strengthening precipitate phases in a Mg–Y–Nd alloy10.1016/S1359-6454(00)00013-6 ↗
62. H. Karimzadeh, Microstructure and mechanical properties of some magnesium alloys containing yttrium and heavy rare earths, (1985).
63. Precipitation and hardening in magnesium alloys10.1007/s11661-012-1217-2 ↗
64. Chemistry and morphology of β′ precipitates in an aged Mg-Nd-Y-Zr alloy10.1080/09500839.2014.995737 ↗
65. 14 - Corrosion of metallic biomaterials
66. Texture effect on corrosion behavior of AZ31 Mg alloy in simulated physiological environment10.1016/j.matlet.2011.11.032 ↗
67. Controlling factors in localised corrosion morphologies observed for magnesium immersed in chloride containing electrolyte10.1039/C4FD00268G ↗
68. The anodic dissolution of magnesium in chloride and sulphate solutions10.1016/S0010-938X(97)00090-5 ↗
69. Biodegradable behaviors of AZ31 magnesium alloy in simulated body fluid10.1016/j.msec.2008.08.026 ↗
70. AC impedance spectroscopy study of the corrosion behavior of an AZ91 magnesium alloy in 0.1M sodium sulfate solution10.1016/j.electacta.2006.10.007 ↗
71. Effect of Y on the bio-corrosion behavior of extruded Mg–Zn–Mn alloy in Hank's solution10.1016/j.msec.2009.09.014 ↗
72. Phosphate–permanganate conversion coatings on the AZ81 magnesium alloy: SEM, EIS and XPS studies10.1016/j.surfcoat.2011.06.035 ↗
73. Analysis of the electrochemical reaction behavior of alloy AZ91 by EIS technique in H3PO4/KOH buffered K2SO4 solutions10.1016/j.corsci.2006.10.016 ↗
74. Electrochemical Impedance Spectroscopy Evaluation of the Corrosion Behavior of Die Cast and Thixocast AXJ530 Magnesium Alloy in Chloride Solution10.1002/adem.200600199 ↗
75. A first-principles surface reaction kinetic model for hydrogen evolution under cathodic and anodic conditions on magnesium10.1149/2.1171609jes ↗
76. The effect of hydrogen on the early stages of oxidation of a magnesium alloy10.1016/j.corsci.2019.108391 ↗
77. Immune response in biocompatibility10.1016/0142-9612(92)90010-L ↗
78. Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys10.1016/j.matchemphys.2019.122350 ↗
79. Foreign body reaction to biomaterials10.1016/j.smim.2007.11.004 ↗
80. The pH dependence of magnesium dissolution and hydrogen evolution during anodic polarization10.1149/2.0621507jes ↗
81. Corrosion behavior in magnesium-based alloys for biomedical applications10.3390/ma15072613 ↗
82. Histomorphology and vascular lesions in dorsal rat skin used as injection sites for a subcutaneous toxicity study10.1177/0192623309357953 ↗
83. Mechanical Properties, Biodegradation, and Biocompatibility of Ultrafine Grained Magnesium Alloy WE4310.3390/ma12213627 ↗
84. Gas formation and biological effects of biodegradable magnesium in a preclinical and clinical observation10.1080/14686996.2018.1451717 ↗