Multi-scale mechanical and morphological characterisation of sintered porous magnesium-based scaffolds for bone regeneration in critical-sized defects
Source abstract
Abstract
Magnesium (Mg) and its alloys are very promising degradable, osteoconductive and osteopromotive materials to be used as regenerative treatment for critical-sized bone defects. Under load-bearing conditions, Mg alloys must display sufficient morphological and mechanical resemblance to the native bone they are meant to replace to provide adequate support and enable initial bone bridging. In this study, unique highly open-porous Mg-based scaffolds were mechanically and morphologically characterised at different scales. In situ X-ray computed tomography (XCT) mechanics, digital volume correlation (DVC), electron microscopy and nanoindentation were combined to assess the influence of material properties on the apparent (macro) mechanics of the scaffold. The results showed that Mg exhibited a higher connected structure (38.4mm-3 and 6.2mm-3 for Mg and trabecular bone (Tb), respectively) and smaller spacing (245µm and 629µm for Mg and Tb, respectively) while keeping an overall appropriate porosity of 55% in the range of trabecular bone (30-80%). This fully connected and highly porous structure promoted lower local strain compared to the trabecular bone structure at material level (i.e. -22067 ± 8409µε and -40120 ± 18364µε at 6% compression for Mg and trabecular bone, respectively) and highly ductile mechanical behaviour at apparent level preventing premature scaffold failure. Furthermore, the Mg scaffolds exceeded the physiological strain of bone tissue generated in daily activities such as walking or running (500-2000µε) by one order of magnitude. The yield stress was also found to be close to trabecular bone (2.06MPa and 6.67MPa for Mg and Tb, respectively). Based on this evidence, the study highlights the overall biomechanical suitability of an innovative Mg-based scaffold design to be used as a treatment for bone critical-sized defects. STATEMENT OF SIGNIFICANCE: Bone regeneration remains a challenging field of research where different materials and solutions are investigated. Among the variety of treatments, biodegradable magnesium-based implants represent a very promising possibility. The novelty of this study is based on the characterisation of innovative magnesium-based implants whose structure and manufacturing have been optimised to enable the preservation of mechanical integrity and resemble bone microarchitecture. It is also based on a multi-scale approach by coupling high-resolution X-ray computed tomography (XCT), with in situ mechanics, digital volume correlation (DVC) as well as nano-indentation and electron-based microscopy imaging to define how degradable porous Mg-based implants fulfil morphological and mechanical requirements to be used as critical bone defects regeneration treatment.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (91)
Show source-provided references
1. Bone injury and fracture healing biology
2. Bone grafts and biomaterials substitutes for bone defect repair: A review
3. Bone regeneration in critical-sized bone defects treated with additively manufactured porous metallic biomaterials: The effects of inelastic mechanical properties10.3390/ma13081992 ↗
4. In Vitro and in Vivo Study of 3D-Printed Porous Tantalum Scaffolds for Repairing Bone Defects10.1021/acsbiomaterials.8b01094 ↗
5. Review of bone graft and bone substitutes with an emphasis on fracture surgeries10.1186/s40824-019-0157-y ↗
6. Current status on clinical applications of magnesium-based orthopaedic implants : A review from clinical translational perspective10.1016/j.biomaterials.2016.10.017 ↗
7. Critical size bone defect healing using collagen-calcium phosphate bone graft materials10.1371/journal.pone.0168883 ↗
8. Bioactive glasses: Where are we and where are we going?10.3390/jfb9010025 ↗
9. Composite hydrogels for bone regeneration10.3390/ma9040267 ↗
10. Design of biocomposite materials for bone tissue regeneration10.1016/j.msec.2015.07.016 ↗
11. Reprint of: The history of biodegradable magnesium implants: A review10.1016/j.actbio.2015.07.017 ↗
12. Biodegradable Magnesium-Based Alloys for Bone Repair Applications : Prospects and
13. Magnesium basics10.1093/ndtplus/sfr163 ↗
14. Chemistry and biochemistry of magnesium10.1016/S0098-2997(02)00087-0 ↗
15. Indications of implant removal: A study of 83 cases
16. Bioabsorbable magnesium screw versus conventional titanium screw fixation for medial malleolar fractures10.1186/s10195-020-00547-7 ↗
17. Cytotoxicity and proinflammatory effects of titanium and zirconia particles10.1186/s40729-019-0178-2 ↗
18. In vitro and in vivo evaluation of biodegradable, open-porous scaffolds made of sintered magnesium W4 short fibres10.1016/j.actbio.2013.03.035 ↗
19. In vivo corrosion of four magnesium alloys and the associated bone response10.1016/j.biomaterials.2004.09.049 ↗
20. Biodegradable magnesium scaffolds: Part I: Appropriate inflammatory response10.1002/jbm.a.31170 ↗
21. Biodegradable magnesium scaffolds: Part II: Peri-implant bone remodeling10.1002/jbm.a.31293 ↗
22. Biodegradable Magnesium Alloys Promote Angio-Osteogenesis to Enhance Bone Repair10.1002/advs.202000800 ↗
23. Stress-shielding induced bone remodeling in cementless shoulder resurfacing arthroplasty: A finite element analysis and in vivo results10.1016/j.jbiomech.2014.08.029 ↗
24. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
25. Biodegradable metals10.1016/j.mser.2014.01.001 ↗
26. Fatigue and quasi-static mechanical behavior of bio-degradable porous biomaterials based on magnesium alloys10.1002/jbm.a.36380 ↗
27. Biodegradable magnesium alloy (WE43) in bone-fixation plate and screw10.1002/jbm.b.34582 ↗
28. Compressive behaviour of bovine cancellous bone and bone analogous materials, microCT characterisation and FE analysis10.1016/j.jmbbm.2011.05.015 ↗
29. A new approach to the fabrication of porous magnesium with well-controlled 3D pore structure for orthopedic applications10.1016/j.msec.2014.07.033 ↗
30. Full-Field Strain Analysis of Bone-Biomaterial Systems Produced by the Implantation of Osteoregenerative Biomaterials in an Ovine Model10.1021/acsbiomaterials.8b01044 ↗
31. The application of digital volume correlation (DVC) to study the microstructural behaviour of trabecular bone during compression10.1016/j.jmbbm.2013.09.014 ↗
32. Elastic Full-Field Strain Analysis and Microdamage Progression in the Vertebral Body from Digital Volume Correlation10.1111/str.12202 ↗
33. Application of the digital volume correlation technique for the measurement of displacement and strain fields in bone: A literature review10.1016/j.jbiomech.2014.01.001 ↗
34. Full-field strain of regenerated bone tissue in a femoral fracture model
35. Full-Field Strain Uncertainties and Residuals at the Cartilage-Bone Interface in Unstained Tissues Using Propagation-Based Phase-Contrast XCT and Digital Volume Correlation10.3390/ma13112579 ↗
36. Computation of full-field displacements in a scaffold implant using digital volume correlation and finite element analysis10.1016/j.medengphy.2013.02.001 ↗
37. Microdamage assessment of bone-cement interfaces under monotonic and cyclic compression10.1016/j.jbiomech.2014.09.012 ↗
38. Applications of X-ray computed tomography for the evaluation of biomaterial-mediated bone regeneration in critical-sized defects10.1111/jmi.12844 ↗
39. Biodegradable magnesium-hydroxyapatite metal matrix composites10.1016/j.biomaterials.2006.12.027 ↗
40. Seven day insertion rest in whole body vibration improves multi-level bone quality in tail suspension rats
41. Elastic properties of microstructural components of human bone tissue as measured by nanoindentation10.1002/(SICI)1097-4636(199904)45:1<48::AID-JBM7>3.0.CO;2-5 ↗
42. Nanoindentation analysis of the micromechanical anisotropy in mouse cortical bone10.1098/rsos.160971 ↗
43. Investigation of degraded bone substitutes made of magnesium alloy using scanning electron microscope and nanoindentation10.1016/j.jmbbm.2020.103825 ↗
44. Degradation behaviour of LAE442-based plate-screw-systems in an in vitro bone model10.1016/j.msec.2015.01.019 ↗
45. Processing and mechanical behavior of lamellar structured degradable magnesium-hydroxyapatite implants10.1016/j.jmbbm.2014.08.016 ↗
46. Influence of hard plate hot forging temperature on the microstructure, texture and mechanical properties in a lean Mg–Zn–Al alloy10.1016/j.jallcom.2019.06.026 ↗
47. Biodegradation-affected fatigue behavior of additively manufactured porous magnesium
48. Mechanical Properties of Lightweight Porous Magnesium Processed Through Powder Metallurgy10.1007/s11837-018-2772-9 ↗
49. Preparation and mechanical property of a novel 3D porous magnesium scaffold for bone tissue engineering10.1016/j.msec.2014.05.044 ↗
50. Sintering of aluminium and magnesium alloy fiber structures
51. Highly porous magnesium alloy structures and their properties regarding degradable implant application10.1002/adem.201300130 ↗
52. The many adaptations of bone10.1016/S0021-9290(03)00124-6 ↗
53. Systematic and random errors in compression testing of trabecular bone10.1002/jor.1100150115 ↗
54. Exploratory full-field strain analysis of regenerated bone tissue from osteoinductive biomaterials10.3390/ma13010168 ↗
55. Precision of Digital Volume Correlation Approaches for Strain Analysis in Bone Imaged with Micro-Computed Tomography at Different Dimensional Levels
56. Trabecular bone exhibits fully linear elastic behavior and yields at low strains10.1016/0021-9290(94)90053-1 ↗
57. A non-local algorithm for image denoising
58. A Threshold Selection Method from Gray-Level Histograms10.1109/TSMC.1979.4310076 ↗
59. Optimization of digital volume correlation computation in SR-microCT images of trabecular bone and bone-biomaterial systems10.1111/jmi.12745 ↗
60. Specimen diameter and “side artifacts” in cancellous bone evaluated using end-constrained elastic tension10.1016/j.bone.2010.03.024 ↗
61. Guidelines for assessment of bone microstructure in rodents using micro-computed tomography10.1002/jbmr.141 ↗
62. Fiji: An open-source platform for biological-image analysis10.1038/nmeth.2019 ↗
63. BoneJ: Free and extensible bone image analysis in ImageJ10.1016/j.bone.2010.08.023 ↗
64. Local displacement and strain uncertainties in different bone types by digital volume correlation of synchrotron microtomograms10.1016/j.jbiomech.2017.04.007 ↗
65. Strain uncertainties from two digital volume correlation approaches in prophylactically augmented vertebrae: Local analysis on bone and cement-bone microstructures10.1016/j.jmbbm.2016.12.006 ↗
66. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments experiments10.1557/JMR.1992.1564 ↗
67. Poisson's ratio values for rocks10.1016/j.ijrmms.2006.04.011 ↗
68. Biomechanics of cellular solids10.1016/j.jbiomech.2004.09.027 ↗
69. Yield strain behavior of trabecular bone10.1016/S0021-9290(98)00057-8 ↗
70. Comparison of the elastic and yield properties of human femoral trabecular and cortical bone tissue10.1016/S0021-9290(03)00257-4 ↗
71. Magnesium scaffolds with two novel biomimetic designs and MgF2 coating for bone tissue engineering10.1016/j.surfcoat.2020.125929 ↗
72. The mechanical behaviour of cancellous bone10.1016/0021-9290(85)90287-8 ↗
73. Mechanoregulation of bone remodeling and healing as inspiration for self-repair in materials10.3390/biomimetics4030046 ↗
74. Effects of in vivo mechanical loading on large bone defect regeneration10.1002/jor.22042 ↗
75. What do we currently know from in vivo bone strain measurements in humans?
76. Three-dimensional microarchitecture of adolescent cancellous bone10.1016/j.bone.2012.07.018 ↗
77. Mechanical loading causes detectable changes in morphometric measures of trabecular structure in human cancellous bone10.1115/1.4024136 ↗
78. Determination of vertebral and femoral trabecular morphology and stiffness using a flat-panel C-arm-based CT approach10.1016/j.bone.2011.10.020 ↗
79. Biomechanics of Trabecular Bone10.1146/annurev.bioeng.3.1.307 ↗
80. Porosity of 3D biomaterial scaffolds and osteogenesis10.1016/j.biomaterials.2005.02.002 ↗
81. Osteoconduction at porous hydroxyapatite with various pore configurations10.1016/S0142-9612(00)00030-2 ↗
82. Quantification of uncertainties on the critical buckling load of columns under axial compression with uncertain random materials10.3390/ma12111828 ↗
83. Experimental and numerical evaluation of the mechanical behavior of strongly anisotropic light-weight metallic fiber structures under static and dynamic compressive loading10.3390/ma9050398 ↗
84. Characterization and investigation of the deformation behavior of porous magnesium scaffolds with entangled architectured pore channels10.1016/j.jmbbm.2016.07.008 ↗
85. Dependence of mechanical compressive strength on local variations in microarchitecture in cancellous bone of proximal human femur10.1016/j.jbiomech.2007.08.003 ↗
86. 3D real-time micromechanical compressive behaviour of bone-cement interface: Experimental and finite element studies10.1016/j.jbiomech.2011.10.011 ↗
87. The effect of sintering temperature to the microstructure and properties of AZ91 magnesium alloy by powder metallurgy10.4028/www.scientific.net/AMM.377.250 ↗
88. Dynamic degradation of porous magnesium under a simulated environment of human cancellous bone10.1016/j.corsci.2016.08.017 ↗
89. Mechanical degradation model of porous magnesium scaffolds under dynamic immersion
90. Additively manufactured biodegradable porous magnesium10.1016/j.actbio.2017.12.008 ↗
91. Biomedical coatings on magnesium alloys - A review10.1016/j.actbio.2012.04.012 ↗