Tissue-mimicking gelatin scaffolds by alginate sacrificial templates for adipose tissue engineering
Source abstract
Abstract
When adipose tissue (AT) is impaired by trauma or disease, AT engineering could provide a shelf-ready structural and functional restoration as alternative to current clinical treatments, which mainly aim at aesthetic replacement. Yet, the lack of an efficient vascular network within the scaffolds represents a major limitation to their translation application in patients. Here, we propose the use of microstructured crosslinked gelatin hydrogels with an embedded prevascular channel as scaffolding materials for AT engineering. The scaffolds are fabricated using - simultaneously - alginate-based microbeads and 3D printed filaments as sacrificial material encapsulated in gelatin at the point of material fabrication and removed post-crosslinking. This method yields the formation of microstructures that resemble the micro-architecture of physiological human fat tissue and of microvessels that can facilitate vascularization through anastomosis with patients' own blood vessels. The cytocompatible method used to prepare the gelatin scaffolds showed structural stability over time while allowing for cell infiltration and protease-based remodeling/degradation. Scaffolds' mechanical properties were also designed to mimic the one of natural breast adipose tissue, a key parameter for AT regeneration. Scaffold's embedded channel (∅ = 300-400 µm) allowed for cell infiltration and enabled blood flow in vitro when an anastomosis with a rat blood artery was performed using surgical glue. In vitro tests with human mesenchymal stem cells (hMSC) showed colonization of the porous structure of the gelatin hydrogels, differentiation into adipocytes and accumulation of lipid droplets, as shown by Oil Red O staining. STATEMENT OF SIGNIFICANCE: The potential clinical use of scaffolds for adipose tissue (AT) regeneration is currently limited by an unmet simultaneous achievement of adequate structural/morphological properties together with a promoted scaffold vascularization. Sacrificial materials, currently used either to obtain a tissue-mimicking structure or hollow channels to promote scaffold' vascularization, are powerful versatile tools for the fabrication of scaffolds with desired features. However, an integrated approach by means of sacrificial templates aiming at simultaneously achieving an adequate AT-mimicking structure and hollow channels for vascularization is missing. Here, we prove the suitability of crosslinked gelatin scaffolds obtained by using sacrificial alginate microbeads and 3D printed strands to achieve proper features and hollow channels useful for scaffolds vascularization.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D Printing in Biomedical Research · Electrospun Nanofibers in Biomedical Applications · Tissue Engineering and Regenerative Medicine
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. The endocrine function of adipose tissue: An update10.1111/j.1365-2265.2006.02474.x ↗
2. Psychological distress in women with breast and gynecological cancer treated with radical surgery10.1002/pon.3439 ↗
3. Stem cells and adipose tissue engineering10.1016/j.biomaterials.2006.07.033 ↗
4. Soft tissue fillers for adipose tissue regeneration: from hydrogel development toward clinical applications10.1016/j.actbio.2017.09.026 ↗
5. Adipose tissue regeneration: a state of the art10.1155/2012/462543 ↗
6. Improvement of the survival of human autologous fat transplantation by using VEGF-transfected adipose-derived stem cells10.1097/PRS.0b013e3181babbb6 ↗
7. Silicone breast implant rupture: a review10.21037/gs.2016.09.12 ↗
8. Autologous flap breast reconstruction: surgical algorithm and patient selection10.1002/jso.24208 ↗
9. Diffusion and perfusion: the keys to fat grafting10.1097/GOX.0000000000000183 ↗
10. Engineering of volume-stable adipose tissues10.1016/j.biomaterials.2004.09.013 ↗
11. In vitro adipose tissue engineering using an electrospun nanofibrous scaffold10.1097/SAP.0b013e31816d9579 ↗
12. Adipose tissue engineering based on mesenchymal stem cells and basic fibroblast growth factor in vitro10.1089/ten.2005.11.1840 ↗
13. Rheological and recovery properties of poly(ethylene glycol) diacrylate hydrogels and human adipose tissue10.1002/jbm.a.30291 ↗
14. Enzymatically degradable poly(ethylene glycol) based hydrogels for adipose tissue engineering10.1016/j.biomaterials.2010.01.128 ↗
15. Biologically and mechanically driven design of an RGD-mimetic macroporous foam for adipose tissue engineering applications10.1016/j.biomaterials.2016.07.004 ↗
16. Biodegradable hyaluronic acid hydrogels to control release of dexamethasone through aqueous Diels-Alder chemistry for adipose tissue engineering10.1016/j.msec.2015.04.004 ↗
17. Structural and rheological characterization of hyaluronic acid-based scaffolds for adipose tissue engineering10.1016/j.biomaterials.2007.06.007 ↗
18. Collagen-hyaluronic acid scaffolds for adipose tissue engineering10.1016/j.actbio.2010.05.005 ↗
19. Preparation of a soft and interconnected macroporous hydroxypropyl cellulose methacrylate scaffold for adipose tissue engineering10.1039/c3tb00446e ↗
20. Engineering adipose-like tissue in vitro and in vivo utilizing human bone marrow and adipose-derived mesenchymal stem cells with silk fibroin 3D scaffolds10.1016/j.biomaterials.2007.08.017 ↗
21. Methacrylated gelatin and mature adipocytes are promising components for adipose tissue engineering10.1177/0885328215587450 ↗
22. Preparation and characterization of gelatin/hyaluronic acid cryogels for adipose tissue engineering: In vitro and in vivo studies10.1016/j.actbio.2013.06.046 ↗
23. MiR-301b∼miR-130b-PPARγ axis underlies the adipogenic capacity of mesenchymal stem cells with different tissue origins
24. adipose tissue engineering for soft tissue regeneration10.1089/ten.teb.2009.0544 ↗
25. Strategy for constructing vascularized adipose units in poly(l-glutamic acid) hydrogel porous scaffold through inducing in-situ formation of ASCs spheroids10.1016/j.actbio.2017.01.043 ↗
26. Ex vivo adipose tissue engineering by human marrow stromal cell seeded gelatin sponge10.1007/s10439-005-2510-7 ↗
27. The mechanical properties of human adipose tissues and their relationships to the structure and composition of the extracellular matrix10.1152/ajpendo.00111.2013 ↗
28. In vitro models of vasculogenesis and angiogenesis10.1038/labinvest.3780252 ↗
29. Vascularization is the key challenge in tissue engineering10.1016/j.addr.2011.03.004 ↗
30. Fabrication of endothelialized tube in collagen gel as starting point for self-developing capillary-like network to construct three-dimensional organs in vitro10.1002/bit.20903 ↗
31. Modulation of angiogenesis during adipose tissue development in murine models of obesity10.1210/en.2005-0532 ↗
32. Generation of multi-scale vascular network system within 3D hydrogel using 3D bio-printing technology10.1007/s12195-014-0340-0 ↗
33. Creating perfused functional vascular channels using 3D bio-printing technology10.1016/j.biomaterials.2014.05.083 ↗
34. Rapid casting of patterned vascular networks for perfusable engineered three-dimensional tissues10.1038/nmat3357 ↗
35. Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs10.1039/C4LC00030G ↗
36. Fabrication of biodegradable synthetic perfusable vascular networks via a combination of electrospinning and robocasting10.1039/C4BM00418C ↗
37. 3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs10.1002/adma.201305506 ↗
38. A versatile method for fabricating tissue engineering scaffolds with a three-dimensional channel for prevasculature networks10.1021/acsami.6b07725 ↗
39. Development of 3D microvascular networks within gelatin hydrogels using thermoresponsive sacrificial microfibers10.1002/adhm.201500792 ↗
40. M.C. Tanzi, S. Farè, I. Gerges, Crosslinked Gelatin Hydrogels, WO2012164032 A1, 2014.
41. Chemically crosslinked gelatin hydrogels as scaffolding materials for adipose tissue engineering
42. Crosslinked gelatin hydrogels as carriers for controlled heparin release10.1016/j.matlet.2018.06.047 ↗
43. Newly identified interfibrillar collagen crosslinking suppresses cell proliferation and remodelling10.1016/j.biomaterials.2015.03.018 ↗
44. 3D printing of methylcellulose-based hydrogels10.1016/j.bprint.2018.e00024 ↗
45. Current methods of adipogenic differentiation of mesenchymal stem cells10.1089/scd.2011.0040 ↗
46. Polyurethane foam scaffold as in vitro model for breast cancer bone metastasis10.1016/j.actbio.2017.09.017 ↗
47. Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
48. The size stability of alginate beads by different ionic crosslinkers10.1155/2017/9304592 ↗
49. Solute diffusion and interactions in cross-linked poly(ethylene glycol) hydrogels studied by Fluorescence
50. A micromechanical model for the Young’s modulus of adipose tissue10.1016/j.ijsolstr.2010.07.001 ↗
51. Subcutaneous adipose tissue classification10.4081/ejh.2010.e48 ↗
52. Photocrosslinkable gelatin hydrogel for epidermal tissue engineering10.1002/adhm.201500005 ↗
53. Adipogenic differentiation of human adult stem cells from bone marrow stroma (MSCs)10.1359/JBMR.0301220 ↗
54. Human adipose derived stem cells are superior to human osteoblasts (HOB) in bone tissue engineering on a collagen-fibroin-ELR blend
55. Versatile fabrication of vascularizable scaffolds for large tissue engineering in bioreactor10.1016/j.biomaterials.2014.12.031 ↗
56. Collagen- vs. Gelatine-based biomaterials and their biocompatibility: review and perspectives
57. Silk fibroin as edible coating for perishable food preservation10.1038/srep25263 ↗
58. Oxygen diffusivity of biologic and synthetic scaffold materials for tissue engineering10.1002/jbm.a.32328 ↗
59. Programmed cell delivery from biodegradable microcapsules for tissue repair10.1080/09205063.2015.1070706 ↗
60. Human preadipocytes seeded on freeze-dried collagen scaffolds investigated in vitro and in vivo10.1016/S0142-9612(00)00186-1 ↗
61. Implantation of preadipocyte-loaded hyaluronic acid-based scaffolds into nude mice to evaluate potential for soft tissue engineering10.1016/j.biomaterials.2005.04.065 ↗
62. Porous decellularized adipose tissue foams for soft tissue regeneration10.1016/j.biomaterials.2013.01.056 ↗
63. A micro/nanoscale surface mechanical study on morpho-functional changes in multilineage-differentiated human mesenchymal stem cells10.1002/mabi.200600271 ↗
64. Comparative study of seeding methods for three-dimensional polymeric scaffolds10.1002/1097-4636(20000915)51:4<642::AID-JBM12>3.0.CO;2-L ↗
65. Cold water fish gelatin methacryloyl hydrogel for tissue engineeringapplication hee10.1371/journal.pone.0163902 ↗
66. Assessment of the characteristics and biocompatibility of gelatin sponge scaffolds prepared by various crosslinking methods
67. Adipocyte produces matrix metalloproteinases 2 and 9 involvement in adipose differentiation10.2337/diabetes.50.9.2080 ↗
68. Engineering the vasculature with additive manufacturing10.1016/j.cobme.2017.05.008 ↗
69. Bioprinting for vascular and vascularized tissue biofabrication10.1016/j.actbio.2017.01.035 ↗
70. Engineering vascularized soft tissue flaps in an animal model using human adipose-derived stem cells and VEGF+PLGA/PEG microspheres on a collagen-chitosan scaffold with a flow-through vascular pedicle10.1016/j.biomaterials.2015.09.024 ↗
71. Fibroblast growth factor 1: a key regulator of human adipogenesis10.2337/diabetes.53.12.3097 ↗
72. The effect of FGF-1 loaded alginate microbeads on neovascularization and adipogenesis in a vascular pedicle model of adipose tissue engineering10.1016/j.biomaterials.2009.12.053 ↗
73. The creation of an in vitro adipose tissue that contains a vascular-adipocyte complex10.1016/j.biomaterials.2011.08.090 ↗
74. In vitro 3D model for human vascularized adipose tissue10.1089/ten.tea.2008.0469 ↗
75. Sustained regeneration of high-volume adipose tissue for breast reconstruction using computer aided design and biomanufacturing10.1016/j.biomaterials.2015.01.025 ↗
76. In Vivo anastomosis and perfusion of a three-dimensionally-printed construct containing microchannel networks10.1089/ten.tec.2015.0239 ↗
77. Evaluation of a miniaturized biologically vascularized scaffold in vitro and in vivo10.1038/s41598-018-22688-w ↗
78. 3D printing of thermoresponsive polyisocyanide (PIC) hydrogels as bioink and fugitive material for tissue engineering10.3390/polym10050555 ↗
79. Fabrication of microfluidic hydrogels using molded gelatin as a sacrificial element10.1039/b618409j ↗
80. Fabrication of an artificial 3-dimensional vascular network using sacrificial sugar structures10.1039/b819905a ↗
81. Engineering interconnected 3D vascular networks in hydrogels using molded sodium alginate lattice as the sacrificial template10.1039/C4LC00069B ↗
82. Citrate metabolism in blood transfusions and its relationship due to metabolic alkalosis and respiratory acidosis
83. Biomimetic design and fabrication of porous chitosan-gelatin liver scaffolds with hierarchical channel network10.1007/s10856-013-5061-8 ↗
84. Multi-casting approach for vascular networks in cellularized hydrogels multi-casting approach for vascular networks in cellularized hydrogels10.1098/rsif.2016.0768 ↗