Synthesis and properties of hydroxyapatite-containing porous titania coating on ultrafine-grained titanium by micro-arc oxidation
Source abstract
Abstract
Equal channel angular pressing results in ultrafine-grained (approximately 200-500 nm) Ti with superior mechanical properties without harmful alloying elements, which benefits medical implants. To further improve the bioactivity of Ti surfaces, Ca/P-containing porous titania coatings were prepared on ultrafine-grained and coarse-grained Ti by micro-arc oxidation (MAO). The phase identification, composition, morphology and microstructure of the coatings and the thermal stability of ultrafine-grained Ti during MAO were investigated subsequently. The amounts of Ca, P and the Ca/P ratio of the coatings formed on ultrafine-grained Ti were greater than those on coarse-grained Ti. Nanocrystalline hydroxyapatite and alpha-Ca(3)(PO(4))(2) phases appeared in the MAO coating formed on ultrafine-grained Ti for 20 min (E20). Incubated in a simulated body fluid, bone-like apatite was completely formed on the surface of E20 after 2 days, thus evidencing preferable bioactivity. Compared with initial ultrafine-grained Ti, the microhardness of the E20 substrate was reduced by 8% to 2.9 GPa, which is considerably more than that of coarse-grained Ti (approximately 1.5 GPa).
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Ductile titanium alloy with low Poisson’s ratio10.1103/PhysRevLett.98.216405 ↗
2. Application of bulk nanostructured materials in medicine10.1016/j.cap.2005.07.053 ↗
3. Processing of vanadium: a review10.1016/S0892-6875(03)00213-9 ↗
4. Fatigue strength of ultrafine-grained pure Ti after severe plastic deformation10.1016/j.scriptamat.2006.01.042 ↗
5. Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing10.1016/j.actamat.2004.06.017 ↗
6. Deformation mechanisms in nanocrystalline palladium at large strains10.1016/j.actamat.2009.03.049 ↗
7. Grain boundary statistics in nano-structured iron produced by high pressure torsion10.1016/j.msea.2004.08.071 ↗
8. Microstructural evolution over a large strain range in aluminium deformed by cyclic-extrusion–compression10.1016/S0921-5093(98)00988-5 ↗
9. Grain refinement and properties of pure Ti processed by warm ECAP and cold rolling10.1016/S0921-5093(02)00366-0 ↗
10. Microstructure development during equal-channel angular pressing of titanium10.1016/S1359-6454(02)00501-3 ↗
11. Enhanced strength and fatigue life of ultra-fine grain Fe–36Ni Invar alloy10.1016/S0921-5093(03)00082-0 ↗
12. Superplastic behaviour of ultrafine-grained Ti–6A1–4V alloys10.1016/S0921-5093(01)01384-3 ↗
13. Nanostructured titanium for biomedical applications10.1002/adem.200800026 ↗
14. Accelerated growth of preosteoblastic cells on ultrafine grained titanium
15. Enhanced osteoblast response to an equal channel angular pressing-processed pure titanium substrate with microrough surface topography10.1016/j.actbio.2009.04.038 ↗
16. Formation and transformation of amorphous calcium phosphates on titanium alloy surfaces during atmospheric plasma spraying and their subsequent in vitro performance10.1016/j.biomaterials.2005.06.029 ↗
17. Surface modification of titanium, titanium alloys and related materials for biomedical applications10.1016/j.mser.2004.11.001 ↗
18. Improvement of surface bioactivity on titanium by water and hydrogen plasma immersion ion implantation10.1016/j.biomaterials.2005.03.032 ↗
19. Fluor-hydroxyapatite sol–gel coating on titanium substrate for hard tissue implants10.1016/j.biomaterials.2003.09.104 ↗
20. Ferreira sol–gel derived fluoridated hydroxyapatite films10.1016/S0025-5408(02)00985-6 ↗
21. Ion beam sensitizing of titanium surfaces to hydroxyapatite formation10.1016/S0257-8972(00)00593-4 ↗
22. Carbonate apatite coating on titanium induced rapidly by precalcification10.1016/S0142-9612(01)00093-X ↗
23. Nucleation and growth of calcium phosphate on amine-, carboxyl- and hydroxyl-silane self-assembled monolayers10.1016/j.biomaterials.2005.06.017 ↗
24. Microarc oxidation coating formed on Ti6Al4V in Na2SiO3 system solution: microstructure, mechanical and tribological properties10.1016/j.surfcoat.2005.10.044 ↗
25. Improved biological performance of Ti implants due to surface modification by micro-arc oxidation10.1016/j.biomaterials.2003.09.048 ↗
26. Biomimetic apatite induction of P-containing titania formed by micro-arc oxidation before and after hydrothermal treatment10.1016/j.surfcoat.2007.08.003 ↗
27. Effects of solution pH and electrical parameters on hydroxyapatite coatings deposited by a plasma-assisted electrophoresis technique10.1002/1097-4636(20011215)57:4<612::AID-JBM1208>3.0.CO;2-H ↗
28. Apatite induction on Ca-containing titania formed by micro-arc oxidation10.1111/j.1551-2916.2005.00476.x ↗
29. Transmission electron microscopy of coatings formed by plasma electrolytic oxidation of titanium10.1016/j.actbio.2008.10.007 ↗
30. Anodic plasma-chemical treatment of CP titanium surfaces for biomedical applications10.1016/S0142-9612(03)00560-X ↗
31. Biomimetic apatite coating on micro-arc oxidized titania10.1016/j.biomaterials.2003.09.103 ↗
32. Formation mechanism of HA-based coatings by micro-arc oxidation10.1016/j.elecom.2008.01.026 ↗
33. Characteristic and in vitro bioactivity of a microarc-oxidized TiO2-based coating after chemical treatment10.1016/j.actbio.2007.03.001 ↗
34. Formation of hydroxyapatite within porous TiO2 layer by micro-arc oxidation coupled with electrophoretic deposition10.1016/j.actbio.2009.02.021 ↗
35. Nitriding iron at lower temperatures10.1126/science.1080216 ↗
36. How useful is SBF in predicting in vivo bone bioactivity?10.1016/j.biomaterials.2006.01.017 ↗
37. Apatite formation on TiO2 in simulated body fluid10.1016/S0022-0248(01)01782-1 ↗
38. X-ray photoelectron spectroscopy (XPS) studies of clean and hydrated TiO2 (rutile) surfaces10.1016/0009-2614(79)87231-0 ↗
39. Influence of a cellulosic ether carrier on the structure of biphasic calcium phosphate ceramic particles in an injectable composite material10.1016/S0142-9612(98)00222-1 ↗
40. Effects of topography and composition of titanium surface oxides on osteoblast responses10.1016/j.biomaterials.2003.11.011 ↗
41. Surface modification of titanium with phosphonic acid to improve bone bonding: characterization by XPS and ToF-SIMS10.1021/la010908i ↗
42. Preparation of bioactive titanium metal via anodic oxidation treatment10.1016/S0142-9612(03)00626-4 ↗
43. Hydroxylaptite growth on single-crystal rutile substrates10.1016/j.biomaterials.2008.04.034 ↗
44. Structure and in vitro bioactivity of titania-based films by micro-arc oxidation10.1016/S0257-8972(03)00016-1 ↗
45. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
46. Biological and medical significance of calcium phosphates10.1002/1521-3773(20020902)41:17<3130::AID-ANIE3130>3.0.CO;2-1 ↗
47. Biomedical applications of polymer-composite materials: a review10.1016/S0266-3538(00)00241-4 ↗
48. Biological materials: structure and mechanical properties10.1016/j.pmatsci.2007.05.002 ↗