Multiscale three-dimensional scaffolds for soft tissue engineering via multimodal electrospinning
Source abstract
Abstract
A novel (scalable) electrospinning process was developed to fabricate bio-inspired multiscale three-dimensional scaffolds endowed with a controlled multimodal distribution of fiber diameters and geared towards soft tissue engineering. The resulting materials finely mingle nano- and microscale fibers together, rather than simply juxtaposing them, as is commonly found in the literature. A detailed proof of concept study was conducted on a simpler bimodal poly(epsilon-caprolactone) (PCL) scaffold with modes of fiber distribution at 600 nm and 3.3 microm. Three conventional unimodal scaffolds with mean diameters of 300 nm and 2.6 and 5.2 microm, respectively, were used as controls to evaluate the new materials. Characterization of the microstructure (i.e. porosity, fiber distribution and pore structure) and mechanical properties (i.e. stiffness, strength and failure mode) indicated that the multimodal scaffold had superior mechanical properties (Young's modulus approximately 40MPa and strength approximately 1MPa) in comparison with the controls, despite the large porosity ( approximately 90% on average). A biological assessment was conducted with bone marrow stromal cell type (mesenchymal stem cells, mTERT-MSCs). While the new material compared favorably with the controls with respect to cell viability (on the outer surface), it outperformed them in terms of cell colonization within the scaffold. The latter result, which could neither be practically achieved in the controls nor expected based on current models of pore size distribution, demonstrated the greater openness of the pore structure of the bimodal material, which remarkably did not come at the expense of its mechanical properties. Furthermore, nanofibers were seen to form a nanoweb bridging across neighboring microfibers, which boosted cell motility and survival. Lastly, standard adipogenic and osteogenic differentiation tests served to demonstrate that the new scaffold did not hinder the multilineage potential of stem cells.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Tissue Engineering and Regenerative Medicine · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Tissue engineering10.1126/science.8493529 ↗
2. Transplantation of chondrocytes utilising a polymer-cell construct to produce tissue engineered cartilage in the shape of a human ear10.1097/00006534-199708000-00001 ↗
3. Tissue-engineered bone regeneration10.1038/79449 ↗
4. Corneal reconstruction with tissue-engineered cell sheets composed of autologous oral mucosal epithelium10.1056/NEJMoa040455 ↗
5. Modulating diseased skin with tissue engineering: actinic purpura treated with Apligraf®
6. Exploring and engineering the cell surface interface10.1126/science.1106587 ↗
7. Tuning hierarchical architecture of 3D polymeric scaffolds for cardiac tissue engineering10.1080/17458080701713946 ↗
8. Matrix elasticity directs stem cell lineage specification10.1016/j.cell.2006.06.044 ↗
9. Criticality of the biological and physical stimuli array inducing resident cardiac stem cell determination10.1634/stemcells.2008-0061 ↗
10. Electrospinning of nanofibers10.1002/app.21481 ↗
11. Electrospinning: applications in drug delivery and tissue engineering10.1016/j.biomaterials.2008.01.011 ↗
12. Electrospinning of polymeric nanofibers for tissue engineering application: a review10.1089/ten.2006.12.1197 ↗
13. Electrospun nanofibrous scaffolds: production, characterization, and applications for tissue engineering and drug delivery10.1166/jbn.2005.032 ↗
14. A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering10.1016/S0142-9612(02)00635-X ↗
15. Electrospinning of nano/micro scale poly(l-lactic acid) aligned fibers and their potential in neural tissue engineering10.1016/j.biomaterials.2004.06.051 ↗
16. Nano- and microfiber combined scaffolds: a new architecture for bone tissue engineering10.1007/s10856-005-4713-8 ↗
17. Endothelial cell colonization and angiogenic potential of combined nano- and microfibrous scaffolds for bone tissue engineering10.1016/j.biomaterials.2008.07.033 ↗
18. Effects of fiber diameter on spreading, proliferation, and differentiation of osteoblastic cells on electrospun poly(lactic acid) substrates10.1016/j.biomaterials.2005.05.084 ↗
19. Electrospun poly(ε-caprolactone) microfiber and multilayer nanofiber/microfiber scaffolds: characterization of scaffolds and measurement of cellular infiltration10.1021/bm060680j ↗
20. Tailoring fiber diameter in electrospun poly(ε-caprolactone) scaffolds for optimal cellular infiltration in cardiovascular tissue engineering
21. Role of fiber diameter in adhesion and proliferation of NIH 3T3 fibroblast on electrospun polycaprolactone scaffolds10.1089/ten.2006.0205 ↗
22. Multilineage differentiation of human mesenchymal stem cells in a three-dimensional nanofibrous scaffold10.1016/j.biomaterials.2005.01.002 ↗
23. The influence of fiber diameter of electrospun substrates on neural stem cell differentiation and proliferation10.1016/j.biomaterials.2008.10.004 ↗
24. Engineered mu-bimodal poly(epsilon-caprolactone) porous scaffold for enhanced hMSC colonization and proliferation10.1016/j.actbio.2008.10.012 ↗
25. Effect of scaffold stiffness on myoblast differentiation10.1089/ten.tea.2008.0111 ↗
26. Thick soft tissue reconstruction on highly perfusive biodegradable scaffolds
27. Fabrication of poly(a-hydroxy acid) foam scaffolds using multiple solvent systems10.1002/jbm.1269 ↗
28. The design of scaffolds for use in tissue engineering. Part I. Traditional factors10.1089/107632701753337645 ↗
29. Statistical geometry of pores and statistics of porous nanofibrous assemblies10.1098/rsif.2005.0039 ↗
30. Modeling stochastic fibrous materials with Mathematica®10.1007/978-1-84800-991-2 ↗
31. Electrospinning versus knitting: two scaffolds for tissue engineering of the aortic valve10.1163/156856206774879153 ↗
32. Characterisation of a soft elastomer poly(glycerol sebacate) designed to match the mechanical properties of myocardial tissue10.1016/j.biomaterials.2007.09.010 ↗
33. Adult mesenchymal stem cells for tissue engineering versus regenerative medicine10.1002/jcp.21200 ↗
34. Multidifferentiation potential of mesenchymal stem cells in three-dimensional collagen gel cultures10.1002/jbm.a.30488 ↗
35. 3-D nanofibrous electrospun multilayered construct is an alternative ECM mimicking scaffold10.1007/s10856-007-3218-z ↗
36. Fiber diameter and texture of electrospun PEOT/PBT scaffolds influence human mesenchymal stem cell proliferation and morphology, and the release of incorporated compounds10.1016/j.biomaterials.2006.05.027 ↗
37. Design and analysis of tissue engineering scaffolds that mimic soft tissue mechanical anisotropy10.1016/j.biomaterials.2006.02.024 ↗
38. Interfacing Sca-1pos mesenchymal stem cells with biocompatible scaffolds with different chemical composition and geometry
39. Stem cells tissue engineering of vascularized cardiac muscle from human embryonic10.1161/01.RES.0000257776.05673.ff ↗
40. Cardiac muscle tissue engineering: toward an in vitro model for electrophysiological studies
41. An Alizarin red-based assay of mineralization by adherent cells in culture: comparison with cetylpyridinium chloride extraction10.1016/j.ab.2004.02.002 ↗
42. Localized compression and shear tests on nanotargets with a Berkovich tip and a novel multifunctional tip10.1557/jmr.2009.0099 ↗
43. Von Kossa staining alone is not sufficient to confirm that mineralization in vitro represents bone formation10.1007/s00223-002-1057-y ↗
44. Cultivation of human embryonic stem cells without the embryoid body step enhances osteogenesis in vitro10.1634/stemcells.2005-0383 ↗