journal article·2018-04-18Open access

Time-Dependent p–i–n Structure and Emission Zone in Sandwich-Type Light-Emitting Electrochemical Cells

Sandra Jenatsch, Markus Regnat, Roland Hany, Matthias Diethelm, Frank Nüesch, Beat Ruhstaller

ACS Photonics· Volume 5· Issue 4

Abstract

Light-emitting electrochemical cells (LECs) are one of the simplest electroluminescent devices and consist of a single emissive organic/salt layer sandwiched between two electrodes. The unique attribute of an operated LEC is the development of a p-doped/intrinsic/n-doped (p–i–n) structure in the active layer in which the doped regions allow for facile transport of electronic charges to the intrinsic region, where charge recombination and light emission occur. However, due to the complex and simultaneous motion of ionic and electronic charges, the examination of the p–i–n structure and the zone where the light is emitted (EZ) is challenging during operation. By analyzing incident photon-to-current conversion efficiency and angular emission measurements with optical simulations, and correlating the results with capacitance measurements, we are able to obtain a clear picture of the p–i–n situation and the EZ within the active layer of a sandwich-type LEC during operation. It is found that the p-doped zone grows to the center of the active layer while the EZ stays closer to the metal electrode and is unchanged over time. Furthermore, optical simulations reveal that the determined EZ limits the external quantum efficiency of the LEC by outcoupling efficiencies of less than 10%.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Organic Light-Emitting Diodes Research · Organic Electronics and Photovoltaics · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Fluxim AG, Technoparkstrasse 2, 8406 Winterthur, Switzerland

Institute of Computational Physics, Zurich University of Applied Sciences ZHAW, Technikumstrasse 9, 8401 Winterthur, Switzerland

Institut des Matériaux, Ecole Polytechnique Fédérale de Lausanne, EPFL, Station 12, CH-1015 Lausanne, Switzerland

Laboratory for Functional Polymers, Empa, Swiss Federal Institute for Materials Science and Technology, 8600 Dübendorf, Switzerland

Funding

Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung · Swiss Commission for Technology and Innovation

References (51)

Show source-provided references
1. 10.1126/science.269.5227.108610.1126/science.269.5227.1086 ↗
2. 10.1016/j.mattod.2014.04.02910.1016/j.mattod.2014.04.029 ↗
3. 10.1007/s41061-016-0040-410.1007/s41061-016-0040-4 ↗
4. 10.1039/C4DT01675K10.1039/C4DT01675K ↗
5. 10.1021/cm502290510.1021/cm5022905 ↗
6. 10.1021/acs.chemmater.5b0484710.1021/acs.chemmater.5b04847 ↗
7. 10.1039/C4SC03942D10.1039/C4SC03942D ↗
8. 10.1002/chem.20130045710.1002/chem.201300457 ↗
9. 10.1002/adma.20110404710.1002/adma.201104047 ↗
10. 10.1002/adfm.20090047910.1002/adfm.200900479 ↗
11. 10.1063/1.161894810.1063/1.1618948 ↗
12. 10.1021/ja711329410.1021/ja7113294 ↗
13. 10.1038/nmat247810.1038/nmat2478 ↗
14. 10.1002/adfm.20100236010.1002/adfm.201002360 ↗
15. 10.1002/adfm.20120268910.1002/adfm.201202689 ↗
16. 10.1016/j.orgel.2011.12.01010.1016/j.orgel.2011.12.010 ↗
17. 10.1021/nn100331510.1021/nn1003315 ↗
18. 10.1039/c2cp40739f10.1039/c2cp40739f ↗
19. 10.1016/j.orgel.2013.06.01510.1016/j.orgel.2013.06.015 ↗
20. 10.1116/1.172232710.1116/1.1722327 ↗
21. 10.1016/j.orgel.2014.08.03110.1016/j.orgel.2014.08.031 ↗
22. 10.1016/j.orgel.2013.04.05210.1016/j.orgel.2013.04.052 ↗
23. 10.1063/1.214916210.1063/1.2149162 ↗
24. 10.1002/adfm.20120088010.1002/adfm.201200880 ↗
25. 10.1364/OE.18.00A24610.1364/OE.18.00A246 ↗
26. 10.1016/j.orgel.2012.05.05310.1016/j.orgel.2012.05.053 ↗
27. 10.1038/nphoton.2010.3210.1038/nphoton.2010.32 ↗
28. 10.1063/1.365644310.1063/1.3656443 ↗
29. 10.1002/adfm.20100258710.1002/adfm.201002587 ↗
30. 10.1002/adfm.20110268710.1002/adfm.201102687 ↗
31. 10.1021/acsami.5b1205510.1021/acsami.5b12055 ↗
32. Thin-film simulation software: Setfos; Fluxim AG, www.fluxim.com.
33. 10.1016/j.cplett.2005.09.05210.1016/j.cplett.2005.09.052 ↗
34. All-in-one measurement platform: Paios; Fluxim AG, www.fluxim.com.
35. 10.1021/ja407515w10.1021/ja407515w ↗
36. 10.1149/2.0201601jss10.1149/2.0201601jss ↗
37. 10.1016/j.orgel.2017.05.03810.1016/j.orgel.2017.05.038 ↗
38. 10.1021/acs.jpcc.7b0141210.1021/acs.jpcc.7b01412 ↗
39. Wang L. · Adv. Funct. Mater. · 2018 · 170572410.1002/adfm.201705724 ↗
40. 10.1002/adfm.20070082410.1002/adfm.200700824 ↗
41. 10.1103/PhysRevB.89.20520610.1103/PhysRevB.89.205206 ↗
42. 10.1063/1.11987510.1063/1.119875 ↗
43. 10.1002/adfm.20070082410.1002/adfm.200700824 ↗
44. 10.1021/ja074760m10.1021/ja074760m ↗
45. 10.1016/j.orgel.2010.03.00210.1016/j.orgel.2010.03.002 ↗
46. 10.1063/1.242287710.1063/1.2422877 ↗
47. Setfos version 4.5, user manual; Fluxim AG.
48. 10.1039/c1jm13245h10.1039/c1jm13245h ↗
49. 10.1039/c1jm10507h10.1039/c1jm10507h ↗
50. 10.1021/j100121a00910.1021/j100121a009 ↗
51. 10.1088/1468-6996/16/3/03500310.1088/1468-6996/16/3/035003 ↗