journal article·2017-06

Ba x Sr 1−x TiO 3 sensing membrane in electrolyte-insulator-semiconductor structure with rapid thermal annealing in N 2 ambient

Chyuan-Haur Kao, Wang Ting Chiu, Yi Cian Chen, Luo Yang, Shin Chieh Tsai, Ting Wei Chang, Ching-Tsan Tsai, Chan-Yu Lin, Hsiang Chen

Vacuum· Volume 140
Publisher page

Abstract

Abstract Ion-sensitive field - effect transistor (ISFET) biosensors were fabricated with a pH-sensitive Ba x Sr 1−x TiO 3 membrane on silicon substrates in an Electrolyte-Insulator-Semiconductor (EIS) structure. To investigate the effects of annealing in N 2 ambient, multiple material analyses including XRD and AFM were performed. Results indicate that the annealing treatment might deteriorate the crystallization. Therefore, the sensing behaviours in terms of sensitivity, linearity, hysteresis effects, and drift rates might be worsened. In this research, Ba x Sr 1−x TiO 3 membranes in an EIS structure with a high sensitivity and linearity were made. However, owing to its special and complicated structures, high-temperature thermal annealing was not suitable for the Ba x Sr 1−x TiO 3 membrane to further boost its sensing capability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Analytical Chemistry and Sensors · Gas Sensing Nanomaterials and Sensors · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Development of an ion-sensitive solid-state device for neurophysiological measurements10.1109/TBME.1970.4502688 ↗
2. Effects of postannealing on the bulk and interfacial characteristics of ZrO2 gate dielectrics prepared on Si by metalorganic chemical vapor deposition10.1116/1.1811627 ↗
3. Effect of nitrogen additives on thermal decomposition of cotton10.1016/j.jaap.2008.12.004 ↗
4. Increase in oxide hole trap density associated with nitrogen incorporation at the SiO2/SiC interface10.1063/1.2940736 ↗
5. Effects of post-deposition annealing ambient on Y2O3 gate deposited on silicon by RF magnetron sputtering10.1016/j.jallcom.2012.02.122 ↗
6. Effects of annealing gas (N2, N2O, O2) on the characteristics of ZrSixOy/ZrO2 high-k gate oxide in MOS devices10.1016/j.tsf.2005.12.287 ↗
7. Effects of Ir electrodes on barium strontium titanate thin-film capacitors for high-density memory application10.1109/16.808068 ↗
8. High-permittivity perovskite thin films for dynamic random-access memories10.1557/S0883769400035910 ↗
9. Dielectric film for biosensor application10.1016/j.snb.2005.11.065 ↗
10. The effect of annealing on the structure and dielectric properties of BaxSr1−xTiO3 ferroelectric thin films10.1063/1.118106 ↗
11. BaxSr1−xTiO3 thin films by a chemical process10.1016/0040-6090(94)90293-3 ↗
12. Preparation and characterisation of compositionally graded BaxSr1−xTiO3 thin films10.1007/s003390101046 ↗
13. A physical model for threshold voltage instability in Si3N4-gate H+-sensitive FET's (pH ISFET's)10.1109/16.678525 ↗
14. A generalized theory of an electrolyte-insulator-semiconductor field-effect transistor10.1109/T-ED.1986.22429 ↗
15. Operation of chemically sensitive field-effect sensors as a function of the insulator-electrolyte interface10.1109/T-ED.1983.21284 ↗
16. A novel description of ISFET sensitivity with the buffer capacity and double-layer capacitance as key parameters10.1016/0925-4005(95)85043-0 ↗