journal article·2025-03Open access

Ultra-thin atomic layer deposited HfO2: Tailoring dielectric thickness for low-operating voltage thin-film transistors

Minyu Chen, Huimin Chen, Eduardo Solano, Danile Hermida Merino, Wenqiang Hua, Xingwei Ding, Bin Wei, Yingjie Liao, Bing Wu

Vacuum· Volume 233

Abstract

To achieve low-power consumption and high performance in TFTs, it is crucial to reduce the thickness of the dielectric gate layer while maintaining a defect-free structure and high dielectric properties. This study explores the effects of varying HfO 2 layer thickness on TFT performance. X-ray photoelectron spectroscopy analysis indicates a decrease in oxygen defects as the film thickness increases. The morphological and topological properties of the films were characterized using grazing incidence small and wide-angle X-ray scattering and atomic force microscopy. Impedance spectroscopy was utilized to analyze the dielectric properties, showing that the 10 nm HfO 2 film exhibited a low leakage current density of 13 nA cm −2 at 1 V and a permittivity of 5.98. The fabricated ZnO TFT with a 10 nm HfO 2 gate dielectric layer operated at an ultra-low voltage of -1.59 V, achieving a high current on/off ratio exceeding 10 6 . These findings highlight the importance of controlling dielectric layer thickness for the development of high-performance TFTs and their potential for low-power microelectronic applications. • HfO 2 films with the thicknesses ranging from 1 to 30 nm by using ALD technology • The growth direction of HfO 2 nucleation is not fixed and • The spacing of HfO 2 grains is about 2.5 nm. • The optimised HfO 2 -based TFT achieved an excellent thermal stability.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Ferroelectric and Negative Capacitance Devices · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Three-dimensional ordered ZnO/Cu2O nanoheterojunctions for efficient metal-oxide solar cells10.1021/am507836v ↗
2. Oxide semiconductor thin-film transistors: a review of recent advances10.1002/adma.201103228 ↗
3. Approaches to label-free flexible DNA biosensors using low-temperature solution-processed InZnO thin-film transistors10.1016/j.bios.2013.11.076 ↗
4. Impact of deposition and annealing temperature on material and electrical characteristics of ALD HfO210.1149/1.1784821 ↗
5. One-volt IGZO thin-film transistors with ultra-thin, solution-processed AlxOy gate dielectric10.1109/LED.2018.2798061 ↗
6. High-kappa gate dielectrics: current status and materials properties considerations10.1063/1.1361065 ↗
7. Probing the dielectric properties of ultrathin Al/Al2O3/Al trilayers fabricated using in situ sputtering and atomic layer deposition10.1021/acsami.7b16506 ↗
8. Role of ultrathin Al2O3 layer in organic/inorganic hybrid gate dielectrics for flexibility improvement of InGaZnO thin film transistors10.1016/j.orgel.2014.04.003 ↗
9. High-performance 1-V ZnO thin-film transistors with ultrathin, ALD-processed ZrO2 gate dielectric10.1109/TED.2019.2924135 ↗
10. Performance regeneration of InGaZnO transistors with ultra-thin channels10.1063/1.4914296 ↗
11. High-κ gate dielectrics:: current status and materials properties considerations10.1063/1.1361065 ↗
12. The electronic structure at the atomic scale of ultrathin gate oxides10.1038/21602 ↗
13. Water-induced scandium oxide dielectric for low-operating voltage n- and p-type metal-oxide thin-film transistors10.1002/adfm.201502612 ↗
14. The role of solution-processed high-κ gate dielectrics in electrical performance of oxide thin-film transistors10.1039/c4tc00334a ↗
15. Development of hafnium based high-k materials-A review10.1016/j.mser.2010.12.001 ↗
16. High-mobility ZnO thin film transistors based on solution-processed hafnium oxide gate dielectrics10.1002/adfm.201402684 ↗
17. Review and perspective on ferroelectric HfO2-based thin films for memory applications10.1557/mrc.2018.175 ↗
18. Nanotubular metal-insulator-metal capacitor arrays for energy storage10.1038/nnano.2009.37 ↗
19. Atomic layer deposition: an overview10.1021/cr900056b ↗
20. Atomic layer deposition of Al-doped ZnO/Al2O3 double layers on vertically aligned carbon nanofiber arrays10.1021/am5006805 ↗
21. Atomic layer deposited high-kappa films and their role in metal-insulator-metal capacitors for Si RF/analog integrated circuit applications10.1002/cvde.200506393 ↗
22. Surface-directed spinodal decomposition in hafnium silicate thin films10.1103/PhysRevB.80.041403 ↗
23. Grazing-incidence small angle x-ray scattering studies of phase separation in hafnium silicate films10.1063/1.1617369 ↗
24. Biocompatible polypeptide-based interpenetrating network (IPN) hydrogels with enhanced mechanical properties10.1039/D0TB01422B ↗
25. SAXS analysis of the thermal relaxation of anisotropic morphologies in oriented nafion membranes10.1021/ma052359j ↗
26. Thermoresponsiveness across the physiologically accessible range: effect of surfactant, cross-linker, and initiator content on size, structure, and transition temperature of poly(N-isopropylmethacrylamide) microgels
27. XPS analysis of nanostructured materials and biological surfaces10.1016/j.elspec.2009.09.003 ↗
28. XPS analysis of oleylamine/oleic acid capped Fe3O4 nanoparticles as a function of temperature10.1016/j.apsusc.2014.02.006 ↗
29. Facile approach for synthesizing high-performance MnO/C electrodes from rice husk10.1021/acsomega.9b03026 ↗
30. Deactivation of TiO2 photocatalytic films loaded on aluminium: XPS and AFM analyses10.1016/j.apsusc.2005.09.023 ↗
31. Impact of morphology on O2 permeability in silicone hydrogel membranes: new insights into domain percolation from experiments and simulations10.1016/j.memsci.2020.118970 ↗
32. Spectroscopic analyses of nanometer scale heterogeneity in PEG-based polyacrylate gel
33. Fine property-tuning through Ca content control in a facile synthesis of glasses-based self-setting injectable hydrogel10.1016/j.matdes.2021.110166 ↗
34. Effect of H-bonding on network junction and macroscopic elastomer properties in photocured polyacrylate films10.1039/D1QM01535D ↗
35. The effect of hydrogen bonding on diffusion and permeability in UV-cured Polyacrylate-based networks for controlled release10.1016/j.jconrel.2020.07.039 ↗
36. Structural characterization of polycrystalline thin films by X-ray diffraction techniques10.1007/s10854-020-04998-w ↗
37. In situ synchrotron based x-ray fluorescence and scattering measurements during atomic layer deposition: initial growth of HfO2 on Si and Ge substrates10.1063/1.3598433 ↗
38. Low-temperature deposition of stoichiometric HfO2 on silicon: analysis and quantification of the HfO2/Si interface from electrical and XPS measurements10.1016/j.apsusc.2010.06.012 ↗
39. Formation mechanism and photoelectric properties of Al2O3 film based on atomic layer deposition10.1016/j.apsusc.2021.151419 ↗
40. Toward an increased reliability of chemical bonding assignment in insulating samples by x-ray photoelectron spectroscopy10.1126/sciadv.adi3192 ↗
41. Role of oxygen vacancy in HfO2∕SiO2∕Si(100) interfaces10.1063/1.2201050 ↗
42. Analysis of weakly bonded oxygen in HfO2/SiO2/Si stacks by using HRBS and ARXPS10.1007/s10854-009-9941-0 ↗
43. Physical properties and electrical characteristics of H2O-based and O3-based HfO2 films deposited by ALD10.1016/j.microrel.2012.01.010 ↗
44. Ion-triggered hydrogels self-assembled from statistical copolypeptides10.1021/acsmacrolett.1c00774 ↗
45. Carbohydrate-based block copolymer thin films: ultrafast nano-organization with 7 nm resolution using microwave energy10.1002/adma.201701645 ↗
46. SAXS of self-assembled oriented lamellar nanocomposite films: an advanced method of evaluation10.1107/S0021889804011288 ↗
47. Following in situ the deposition of gold electrodes on low band gap polymer films10.1021/acsami.9b17590 ↗