Analysis of thermal diffusion effects observed in a capacitively coupled plasma deposition reactor with non-isothermal walls
Source abstract
Abstract
In the semiconductor industry, non-isothermal wall conditions are often adopted to optimize process results for plasma enhanced chemical vapor deposition (PECVD). When heavier (or larger) species are mixed with lighter (or smaller) species in the presence of non-isothermal wall conditions, thermal diffusion phenomena are often observed. Thermal diffusion generates a concentration of the heavier (or larger) species in colder regions, while the lighter (or smaller) species are transported towards the hotter regions. Consequently, both averaged values and spatial profiles of film deposition rates can be noticeably changed by thermal diffusion. When uniformity of the deposition rate profile is required to be less than 5%, an accurate numerical model needs to involve complex multi-component transport. In this study selected input parameters, such as the mole fraction of a source gas, gas velocity magnitude, susceptor temperature, and gas pressure are varied to carefully investigate thermal diffusion effects on the spatial density distributions of ions and radicals. As a case study for PECVD, SiH4/He capacitively coupled plasma is selected to deposit a hydrogenated amorphous silicon film. It is found that a sufficient increase of the susceptor temperature is best for obtaining a uniform deposition rate profile in the test bed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Thin-Film Transistor Technologies · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Physical and electrical properties of memory quality PECVD silicon oxynitride10.1149/1.2086640 ↗
2. Time-dependent dielectric breakdown studies of PECVD H:SiCN and H:SiC thin films for copper metallization10.1149/1.1806397 ↗
3. A voltage uniformity study in large-area reactors for RF plasma deposition10.1088/0963-0252/6/2/010 ↗
4. Structure of PECVD Si:H films for solar cell applications10.1016/S0927-0248(02)00274-X ↗
5. Lieberman · 2005
6. Computer modelling of the plasma chemistry and plasma-based growth mechanisms for nanostructured materials10.1088/0022-3727/44/17/174030 ↗
7. Reactor modeling for radio frequency plasma deposition of SiNxHy: comparison between two reactor designs10.1116/1.580083 ↗
8. Influence of the reactor design in the case of silicon nitride PECVD10.1016/S0009-2509(97)84656-8 ↗
9. Incorporating the gas flow in a numerical model of rf discharges in methane10.1063/1.1782951 ↗
10. Silicon epitaxial growth by plasma enhanced chemical vapor deposition from SiH4/H2 at 165–350°C10.1016/0022-0248(95)80011-5 ↗
11. Two-dimensional modelling of SiH4-H2 radio-frequency discharges for a-Si:H deposition10.1088/0963-0252/7/3/013 ↗
12. Low-temperature synthesis of graphene on Cu using plasma-assisted thermal chemical vapor deposition10.1186/1556-276X-8-285 ↗
13. Stress control of plasma enhanced chemical vapor deposited silicon oxide film from tetraethoxysilane10.1088/0960-1317/24/2/027001 ↗
14. Preparation and analysis of amorphous carbon films deposited from (C6H12)/Ar/He chemistry for application as the dry etch hard mask in the semiconductor manufacturing process10.1016/j.tsf.2011.01.405 ↗
15. Comparative study on the properties of amorphous carbon layers deposited from 1-hexene and propylene for dry etch hard mask application in semiconductor device manufacturing10.1016/j.tsf.2011.04.077 ↗
16. Effect of deposition temperature and thermal annealing on the dry etch rate of a-C:H films for the dry etch hard process of semiconductor devices10.1016/j.tsf.2012.03.009 ↗
17. Bird · 2007
18. Thermal diffusion effects in chemical vapor deposition reactors10.1149/1.2115441 ↗
19. A mathematical model for LPCVD in a single wafer reactor10.1149/1.2096465 ↗
20. Transport phenomena in tungsten LPCVD in a single‐wafer reactor10.1149/1.2085620 ↗
21. Thermal diffusion in metal‐organic chemical vapor deposition10.1149/1.2096131 ↗
22. Effect of electrode spacing on the density distributions of electrons, ions, and metastable and radical molecules in SiH4/NH3/N2/He capacitively coupled plasmas10.1063/1.4927531 ↗
23. 2D fluid model analysis for the effect of 3D gas flow on a capacitively coupled plasma deposition reactor
24. Numerical analysis of the effect of electrode spacing on deposition rate profiles in a capacitively coupled plasma reactor
25. Uniformity control of the deposition rate profile of a-Si:H film by gas velocity and temperature distributions in a capacitively coupled plasma reactor10.1063/1.5001384 ↗
26. Cross-sections, rate constants and transport coefficients in silane plasma chemistry10.1002/ctpp.2150360102 ↗
27. A global model study of silane/hydrogen discharges10.1088/0963-0252/22/5/055009 ↗
28. Simulation of the gas-phase processes in remote-plasma-activated chemical-vapor deposition of silicon dielectrics using rare gas-silane-ammonia mixtures10.1063/1.350821 ↗
29. Control of higher-silane generation by dilution gases in SiH4 plasmas10.1088/1361-6595/aba7ee ↗