Aluminum doped zinc oxide wide band-gap n-type optical window for μc-Si superstrate solar cell
Source abstract
Abstract
Abstract ZnO:Al thin films were deposited onto glass substrates by RF-magnetron sputtering system. The crystallographic orientation of the films, determined using an X-ray diffractometer (XRD), had a high c -axis orientated crystalline structure along (002) plane. The grains are densely packed as shown in the surface micrograph. The electrical parameters were carried out using Hall Effect measurements. The optical band-gap of the films was estimated based on the thickness and the optical transmittance data and is about 3.78 eV for 50 W RF-power. All parameters obtained were used to simulate a new solar cell structure based on p-type microcrystalline silicon as an absorber and n-ZnO:Al as an optical window. The excellent optical properties of this layer result in a high light trapping yielding to efficiencies about 19%. In order to improve efficiency, we have used a p + -μc-Si thin layer highly doped as a back surface field which minimizes significantly the impact of rear surface recombination velocity on voltage and current leading to a high efficiency of 22%. Optoelectronic parameters were determined using the current density-voltage ( J-V ) curve by means of an AMPS-1D device simulator.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Texture etched ZnO: Al coated glass substrates for silicon based thin film solar cells10.1016/S0040-6090(99)00085-1 ↗
2. Preparation and character of textured ZnO: Al thin films deposited on flexible substrates by RF magnetron sputtering10.1016/j.matlet.2011.01.019 ↗
3. Characterization of aluminium doped zinc oxide thin films deposited on polymeric substrates10.1016/S0042-207X(01)00319-0 ↗
4. Preparation of transparent conducting ZnO: Al films on polymer substrates by rf. magnetron sputtering10.1016/S0169-4332(99)00591-7 ↗
5. Growth of ZnO: Al films by RF sputtering at room temperature for solar cell applications10.1016/j.sse.2009.07.006 ↗
6. Polycrystalline silicon thin-film solar cells: status and perspectives10.1016/j.solmat.2013.05.043 ↗
7. Multicrystalline silicon solar cells exceeding 20% efficiency10.1002/pip.583 ↗
8. The role of antireflective coating in silicon solar cells, the influence on their electrical parameters
9. Enhancement of silicon solar cell efficiency by using back surface field in comparison of different antireflective coating10.1016/j.solener.2013.12.021 ↗
10. Optical improved structure of polycrystalline silicon-based thin-film solar cell10.1016/S0927-0248(01)00169-6 ↗
11. Atomic layer deposited ZnO: Al for nanostructured silicon heterojunction solar cells10.1016/j.solmat.2012.04.004 ↗
12. Structural, optical and electrical properties of (Zn,Al)O films over a wide range of compositions10.1063/1.2357638 ↗
13. Electrical and optical properties of aluminum-doped zinc oxide sputtered from an aerogel nanopowder target10.1088/0957-4484/18/44/445702 ↗
14. Fundamentals of zinc oxide as a semiconductor10.1088/0034-4885/72/12/126501 ↗
15. Fonash · 1997
16. Efficiency improvement of crystalline silicon solar cells with a back-surface field produced by boron and aluminum co-doping10.1016/j.scriptamat.2011.11.044 ↗
17. Analysis of local Al-doped back surface fields for high efficiency screen-printed solar cells10.1016/j.egypro.2011.06.143 ↗
18. 20.1% efficient silicon solar cell with aluminum back surface field10.1109/LED.2011.2157656 ↗
19. Transparent conducting ZnO: Al, in and Sn thin films deposited by the sol–gel method10.1016/S0040-6090(03)00014-2 ↗
20. Formation of transparent and ohmic ZnO: Al/MoSe 2 contacts for bifacial Cu(In,Ga)Se 2 solar cells and tandem structures10.1016/j.tsf.2004.11.001 ↗
21. Analysis of recombination losses in screen-printed aluminum-alloyed back surface fields of silicon solar cells by numerical device simulation10.1016/j.solmat.2013.05.051 ↗
22. Parametric simulation of the back-surface field effect in the silicon solar cell10.1016/j.solidstatesciences.2014.01.005 ↗