Non-treated low temperature indium tin oxide fabricated in oxygen-free environment to low-cost silicon-based solar technology
Source abstract
Abstract
80 nm nominal thick ITO thin films were deposited at room temperature and at low plasma irradiation conditions in an oxygen-free environment by magnetron sputtering. The assessment of the dependence of their structural and optoelectronic properties with the deposition parameters were determined to evaluate their potential in silicon-based solar technology. The results revealed high quality ITO thin films deposited at room temperature and at low direct-current power values up to 75 W. These films showed amorphous and polycrystalline nature, depending on the range of power used. The thin films performance was determined by the figure of merit, reaching the best material developed at room temperature and at 75 W. The successful use of ITO as an effective n-type doped film in a N???P heterojunction silicon-based protocell revealed its feasibility to make up the heterojunction showing its double role as antireflection coating and as substitute of conventional emitters in silicon solar technology. This would open new opportunities of technologically interesting materials fabricated at low manufacturing cost.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Thin-Film Transistor Technologies · ZnO doping and properties · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Sark · 2012 · 110.1007/978-3-642-22275-7 ↗
2. https://itrpv.vdma.org.
3. Global Market Outlook for Solar Power 2018 - 2022. https://www.solarpowereurope.org/.
4. https://www.pv-magazine.com/2019/10/26/the-weekend-read-a-lead-free-future-for-solar-pv/.
5. Carrier selective contacts for Silicon solar cells10.1063/1.4875904 ↗
6. Carrier selective, passivated contacts for high efficiency silicon solar cells based on transparent conductive oxides
7. High efficiency crystalline silicon solar cells: status and perspectives10.1039/C5EE03380B ↗
8. Anti-reflective coatings: a critical, in-depth review10.1039/c1ee01297e ↗
9. Jayaram · 2019
10. Transparent conducting oxides—an up-to-date overview10.3390/ma5040661 ↗
11. Optimization of aluminum-doped zinc oxide films deposited at low temperature by radio-frequency on flexible substrates for solar cell applications10.1016/j.solmat.2009.08.012 ↗
12. Structure, optical and electrical properties of indium tin oxide ultra thin films prepared by jet nebulizer spray pyrolysis technique10.1016/j.jascer.2016.01.001 ↗
13. Fabrication of highly transparent and conductive ITO thin films with a high figure of merit via solution processing10.1021/la4033282 ↗
14. Influence of dc sputtering parameters on surface morphology of indium tin oxide thin films10.1016/S0169-4332(03)00862-6 ↗
15. Stability of transparent conducting oxide films deposited by sputtering for solar cells applications
16. Surface morphology, structural and electrical properties of RF-Sputtered ITO thin films on Si substrates10.1007/s12034-018-1595-1 ↗
17. Rapid thermal annealing for high-quality ITO thin films deposited by radio-frequency magnetron sputtering10.3762/bjnano.10.149 ↗
18. Ahmed · 2019 · 13 · 102159
19. Comparison of low damage sputter deposition techniques to enable the application of very thin a-Si passivation films10.1063/1.5123836 ↗
20. A study of low temperature crystallization of amorphous thin film indium-tin-oxide10.1063/1.370695 ↗
21. Fernández · Mater. Sci. Semicond. Process. · 2018 · 90 · 25210.1016/j.mssp.2018.10.027 ↗
22. Perkins · 2011 · 3646
23. Cullity · 1978
24. WSXM: a software for scanning probe microscopy and a tool for nanotechnology10.1063/1.2432410 ↗
25. “Structural, morphological characteristics and optical properties of Y doped ZnO thin films by sol–gel spin coating method”10.1016/j.spmi.2015.05.005 ↗
26. New figure of merit for transparent conductors10.1063/1.323240 ↗
27. Amorphous to crystalline transition and optoelectronic properties of nanocrystalline indium tin oxide (ITO) films sputtered with high rf power at room temperature10.1016/j.jnoncrysol.2009.04.043 ↗
28. In situ crystallization of highly conducting and transparent ITO thin films deposited by RF magnetron sputtering10.1016/j.vacuum.2016.07.035 ↗
29. The effect of post annealing temperature on grain size of indium-tin-oxide for optical and electrical properties improvement10.1016/j.rinp.2019.102159 ↗
30. Tin(II) oxide: structure refinement and thermal expansion10.1107/S0567740880009934 ↗
31. Isomorphie und Polymorphie der Sesquioxyde. Die Lanthaniden-Kontraktion und ihre Konsequenzen
32. High quality ITO thin films grown by DC and RF sputtering without oxygen10.1088/0022-3727/43/5/055402 ↗
33. Influence of chemical composition on phase transformation and optoelectronic properties of Cu–Cr–O thin films by reactive magnetron sputtering10.1016/j.jmrt.2018.05.013 ↗
34. Role of sputtering power on the microstructural and electro‐optical properties of ITO thin films deposited using DC sputtering technique10.1002/tee.22494 ↗
35. The remarkable thermal stability of amorphous in-Zn-O transparent conductors10.1002/adfm.200700604 ↗
36. Alfonso · 2012
37. Kim · 2009 · 42
38. Bellingham · J. Phys.:Condes. Matter · 1990 · 2 · 6201
39. Structural, optical and electrical properties of ITO thin films10.1007/s11664-017-5915-9 ↗
40. Influence of sputtering power on the optical properties of ITO thin films
41. Effects of film thickness and sputtering power on properties of ITO thin films deposited by RF magnetron sputtering without oxygen10.1007/s10854-016-5223-9 ↗
42. Deposition by magnetron sputtering and characterization of indium tin oxide thin films10.1016/j.tsf.2006.11.113 ↗
43. Postdeposition annealing influence on sputtered indium tin oxide film characteristics10.1143/JJAP.33.302 ↗
44. Effect of oxygen partial pressure on the structural and optical properties of dc sputtered ITO thin films10.1016/j.jallcom.2009.06.103 ↗
45. Silicon heterojunction solar cells: recent technological development and practical aspects - from lab to industry10.1016/j.solmat.2018.07.018 ↗
46. Nanophase-separated polymer films as high-performance antireflection coatings10.1126/science.283.5401.520 ↗
47. Toward perfect antireflection coatings. 2. theory10.1364/AO.43.001286 ↗