Characterization of Cu-doped Cd1−xZnxTe thin films sputtered from multiple targets
Source abstract
Abstract
Cd1−xZnxTe (CZT) has a band gap tailored continuously from 1.45 to 2.26 eV and is therefore a potential candidate for the top cell in tandem solar cell applications. In this paper, Cd0.6Zn0.4Te: Cu thin films were fabricated by RF magnetron sputtering from three targets (ZnTe, CdTe and Cu). X-ray diffraction patterns show that the as-deposited films were the cubic phase with a preferred (111) orientation. The strain formed in the Cu-doped Cd0.6Zn0.4Te thin films increased with increasing Cu concentration. All the films had a band gap of around 1.72 eV, but an apparent decrease of transmittance occurred in heavily doped ones.5.70 at% doped Cd0.6Zn0.4Te: Cu films presented only less than 10% transmittance. The conductivity of Cd0.6Zn0.4Te: Cu films at room temperature increased with Cu concentration in the range of 10−4∼100 S cm−1. The temperature dependence of dark conductivity for Cu-doped samples did not follow the Arrhenius behavior and a deviation appeared on the warming curve. The activation energy of the dark conductivity for doped and undoped CZT films was calculated between 0.15 and 0.80 eV. Finally, CdS/CZT junctions were prepared. These devices were found to indicate the photovoltaic effects. And the device performance was analyzed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Advanced Semiconductor Detectors and Materials · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Green · 2006
2. Third generation multi-layer tandem solar cells for achieving high conversion efficiencies10.1016/j.solmat.2004.08.008 ↗
3. Critical issues in the design of polycrystalline, thin-film tandem solar cells10.1002/pip.491 ↗
4. Surface morphology and depth profile study of Cd1−xZnxTe alloy nanostructures10.1016/j.jallcom.2012.08.028 ↗
5. II–VI compounds as the top absorbers in tandem solar cell structures10.1016/j.mseb.2004.05.054 ↗
6. Investigation of non-aqueous electrodeposited CdS/Cd1−xZnxTe heterojunction solar cells10.1016/j.solmat.2003.08.011 ↗
7. Type conversion of polycrystalline CdZnTe thick films by multiple compensation10.1016/j.nima.2007.10.025 ↗
8. Epitaxial growth and nitrogen radical doping of CdZnTe10.1149/1.1392500 ↗
9. Optical characterization of vacuum evaporated CdZnTe thin films deposited by a multilayer method10.1016/j.vacuum.2007.04.003 ↗
10. Structure of CdZnTe films on glass10.1088/0022-3727/41/6/065402 ↗
11. Cd1−xZnxTe thin films and junctions10.1016/j.tsf.2004.11.069 ↗
12. Gessert TA, Duda A, Asher SE, Narayanswamy C, Rose D. In: Proc. 28th IEEE PVSEC (IEEE, Picataway, N.J. 2000), pp. 654–57.
13. Wu X, Keane JC, Dhere RG, Dehart C, Sheldon DS, Duda A, et al, In: Proc. 17th European PVSEC (Munich, 2001), pp. 995–00.
14. Preparation, and structural, optical and electrical properties of the Cd1−xSxTe system10.1007/BF00349059 ↗
15. Preparation of p-type CdS thin films and in situ dark conductivity in vacuum deposited CdS: Cu films10.1016/j.apsusc.2010.08.110 ↗
16. X-ray line broadening from filed aluminium and wolfram10.1016/0001-6160(53)90006-6 ↗
17. Fahrenbruch · 1983
18. The electrical properties of polycrystalline silicon films10.1063/1.321593 ↗
19. Effect of annealing with CdCl2/ZnCl2 on properties of Cd1−xZnxTe polycrystalline thin films10.3788/LOP50.053102 ↗