journal article·2020-01

Nitrogen plasma treatment of a TiO2 layer for MIS ohmic contact on n-type Ge substrate

Jheng-Ci Yang, Hsin-Fu Huang, Jyun-Han Li, Yao-Jen Lee, Yeong-Her Wang

Vacuum· Volume 171
Publisher page

Abstract

Abstract This work investigates the characteristics of ohmic contacts on an n-type Ge by combining TiO2 with different metals. Metal-insulator-semiconductor (MIS) structures easily crystallize after post-metal annealing (PMA), with the subsequent characteristics dependent on the insulator thickness and process temperature. If 2 nm thick TiO2 is doped with nitrogen, there is no obvious difference in the current-voltage characteristics before/after PMA. The transmission electron microscope (TEM) analysis also verified that a lightly nitrogen-doped process is useful in suppressing the crystalline transition. In this study, the tungsten (W) contact showed the best thermal stability. Therefore, this technique could be effective in suppressing TiO2 crystallization with improved thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Semiconductor materials and interfaces · Advancements in Semiconductor Devices and Circuit Design

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. More moore scaling: opportunities and inflection points
2. Impact of multi-gate device architectures on digital and analog circuits and its implications on System-On-Chip technologies
3. Enabling Semiconductor Innovation and Growth-EUV lithography drives Moore’s law well into the next decade
4. Low resistance contacts to nanoscale semiconductor devices10.1149/07508.0513ecst ↗
5. Evidence for strong Fermi-level pinning due to metal-induced gap states at metal/germanium interface10.1063/1.2789701 ↗
6. Analysis of atomistic dopant variation and Fermi level depinning in nanoscale contacts10.1109/TED.2017.2720183 ↗
7. Fermi-level unpinning technique with excellent thermal stability for n-type germanium10.1021/acsami.7b10346 ↗
8. Interfacial band alignment and structural properties of nanoscale TiO2 thin films for integration with epitaxial crystallographic oriented germanium10.1063/1.4861137 ↗
9. A unified model for insulator selection to form ultra-low resistivity metal-insulator-semiconductor contacts to n-Si, n-Ge, and n-InGaAs10.1063/1.4739784 ↗
10. Fully aligned via integration for extendibility of interconnects to beyond the 7 nm node
11. Titanium oxide crystallization and interface defect passivation for high performance insulator-protected Schottky junction MIS photoanodes10.1021/acsami.6b03688 ↗
12. Fabrication of titanium oxide thin films by controlled growth with sequential surface chemical reactions10.1016/0040-6090(95)06555-5 ↗
13. Morphology and structure of TiO2 thin films grown by atomic layer deposition10.1016/0022-0248(94)00874-4 ↗
14. TiO2 film properties as a function of processing temperature10.1149/1.2404316 ↗
15. A correlation of Auger electron spectroscopy, x‐ray photoelectron spectroscopy, and Rutherford backscattering spectrometry measurements on sputter‐deposited titanium nitride thin films10.1116/1.574092 ↗
16. XPS study of thin films of titanium oxysulfides10.1016/0039-6028(91)90640-E ↗
17. Tuning Schottky barrier height in metal/n-type germanium by inserting an ultrathin yttrium oxide film10.1149/2.001204ssl ↗
18. Schottky barrier height extraction in Ohmic regime: Contacts on fully processed GeOI substrates10.1149/1.3121562 ↗
19. Apparent Schottky Barrier Height of MIS Ni/SiC diodes
20. Characterization of platinum germanide/Ge(100) Schottky barrier height for Ge channel Metal Source/Drain MOSFET10.1016/j.tsf.2005.06.119 ↗
21. A dopingless FET with metal-insulator-semiconductor contacts10.1109/LED.2016.2628414 ↗
22. Undoped and doped junctionless FETs: Source/drain contacts and immunity to random dopant fluctuation10.1109/LED.2017.2690993 ↗