Interaction of the O atom with the InSe monolayer: A first-principles study
Source abstract
Abstract
Abstract The interaction of the O impurity atom with the InSe monolayer has been investigated by using first-principles calculations. O atoms energetically highly tend to be located at the inner of the material between the In-In bond. The energy barrier (0.53 eV) for the O diffusion from the topmost atomic layer to the material inner is much smaller than that (1.12 eV) for the diffusion across the topmost atomic layer. These suggest that the O atom on the topmost atomic layer can rapidly diffuse into the material inner far below room temperature. However, the rapid diffusion of the O atom in the material inner may need an elevated temperature, due to its higher diffusion energy barrier of 0.99 eV. For the electronic structure, O impurity single atoms are most likely to only induce a slight change in the bandgap, and moderate changes in the band dispersion and the carrier effective masses of the valence and conduction bands. Further, a higher concentration of O impurities in the inner of InSe has been studied. Our studies are helpful for understanding of the oxidation, enviromental stability, and electronic properties of InSe two-dimensional semiconductors at the atomic level, due to the O impurity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 2D Materials and Applications · Chalcogenide Semiconductor Thin Films · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Two-dimensional semiconductors for transistors10.1038/natrevmats.2016.52 ↗
2. 2D materials and van der Waals heterostructures10.1126/science.aac9439 ↗
3. Tuning the bandgap of exfoliated InSe nanosheets by quantum confinement10.1002/adma.201302616 ↗
4. Quantum confined acceptors and donors in InSe nanosheets10.1063/1.4903738 ↗
5. Gate modulation of threshold voltage instability in multilayer InSe field effect transistors10.1021/acsami.5b08635 ↗
6. Solution-processed two-dimensional ultrathin InSe nanosheets10.1021/acs.chemmater.5b04646 ↗
7. Photogeneration and mobility of charge carriers in atomically thin colloidal InSe nanosheets probed by ultrafast terahertz spectroscopy10.1021/acs.jpclett.6b01835 ↗
8. Intrinsic electron mobility exceeding 103 cm2/(V s) in multilayer InSe FETs10.1021/acs.nanolett.5b00493 ↗
9. Back gated multilayer InSe transistors with enhanced Carrier mobilities via the suppression of Carrier scattering from a dielectric interface10.1002/adma.201402427 ↗
10. High electron mobility, quantum Hall effect and anomalous optical response in atomically thin InSe10.1038/nnano.2016.242 ↗
11. High-mobility InSe transistors: the role of surface oxides10.1021/acsnano.7b03531 ↗
12. Evolution of the electronic band structure and efficient photo-detection in atomic layers of InSe10.1021/nn405036u ↗
13. High performance and bendable few-layered InSe photodetectors with broad spectral response10.1021/nl500817g ↗
14. Wafer-scale synthesis of high-quality semiconducting two-dimensional layered InSe with broadband photoresponse10.1021/acsnano.7b01168 ↗
15. Nanotexturing to enhance photoluminescent response of atomically thin indium selenide with highly tunable band gap10.1021/acs.nanolett.6b00689 ↗
16. Ultrahigh photo-responsivity and detectivity in multilayer InSe nanosheets phototransistors with broadband response10.1039/C5TC01208B ↗
17. Electrons and phonons in single layers of hexagonal indium chalcogenides from ab initio calculations10.1103/PhysRevB.89.205416 ↗
18. Two-dimensional indium selenides compounds: an ab initio study10.1021/acs.jpclett.5b01356 ↗
19. Ab initio study of Carrier mobility of few-layer InSe
20. n- and p-type dopants in the InSe monolayer via substitutional doping10.1007/s10853-017-0957-1 ↗
21. Aging of transition metal dichalcogenide monolayers10.1021/acsnano.5b07677 ↗
22. Scanning tunneling microscopy and spectroscopy of air exposure effects on molecular beam epitaxy grown WSe2 monolayers and bilayers10.1021/acsnano.5b07698 ↗
23. Air sensitivity of MoS2, MoSe2, MoTe2, HfS2, and HfSe210.1063/1.4963290 ↗
24. Intrinsic air stability mechanisms of two-dimensional transition metal dichalcogenide surfaces: basal versus edge oxidation
25. In situ thermal oxidation kinetics in few layer MoS2
26. The role of H2O and O2 molecules and phosphorus vacancies in the structure instability of phosphorene
27. Light-induced ambient degradation of few-layer black phosphorus: mechanism and protection10.1002/ange.201605168 ↗
28. Surface coordination of black phosphorus for robust air and water stability10.1002/anie.201512038 ↗
29. Interaction of black phosphorus with oxygen and water10.1021/acs.chemmater.6b03592 ↗
30. Environmental instability of few-layer black phosphorus
31. Black phosphorus field-effect transistors10.1038/nnano.2014.35 ↗
32. Degradation of phosphorene in air: understanding at atomic level10.1088/2053-1583/3/2/025011 ↗
33. Wang · 2017 · vol. 7 · 1
34. Surface oxidation energetics and kinetics on MoS2 monolayer10.1063/1.4916536 ↗
35. Remote plasma oxidation and atomic layer etching of MoS210.1021/acsami.6b04719 ↗
36. Oxidation resistance of monolayer group-iv monochalcogenides10.1021/acsami.6b16786 ↗
37. Atomistic insight into the oxidation of monolayer transition metal dichalcogenides: from structures to electronic properties10.1039/C4RA17320A ↗
38. Air passivation of chalcogen vacancies in two-dimensional semiconductors10.1002/anie.201508828 ↗
39. Phosphorene oxide: stability and electronic properties of a novel two-dimensional material10.1039/C4NR05384B ↗
40. Phosphorene oxides: bandgap engineering of phosphorene by oxidation10.1103/PhysRevB.91.085407 ↗
41. Bandgap engineering of phosphorene by laser oxidation toward functional 2D materials10.1021/acsnano.5b04623 ↗
42. Tuning the band gap in silicene by oxidation10.1021/nn504451t ↗
43. Effects of oxygen adsorption on the surface state of epitaxial silicene on Ag(111)10.1038/srep07543 ↗
44. Effects of oxygen contamination on monolayer GeSe: a computational study10.1103/PhysRevB.94.035440 ↗
45. Engineering p – n junctions and bandgap tuning of InSe nanolayers by controlled oxidation
46. Charge transfer and functionalization of monolayer InSe by physisorption of small molecules for gas sensing10.1021/acs.jpcc.7b02286 ↗
47. First-principles study of the small molecule adsorption on the InSe monolayer10.1016/j.apsusc.2017.07.198 ↗
48. Oxidation mechanism and protection strategy of ultrathin indium selenide: insight from theory10.1021/acs.jpclett.7b02059 ↗
49. Defects and oxidation of group-III monochalcogenide monolayers
50. Defects and oxidation resilience in InSe10.1103/PhysRevB.96.054112 ↗
51. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
52. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
53. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
54. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
55. Quasi-free-standing features of stanene/stanane on InSe and GaTe nanosheets: a computational study10.1021/acs.jpcc.5b08946 ↗
56. A climbing image nudged elastic band method for finding saddle points and minimum energy paths10.1063/1.1329672 ↗
57. Special points for Brillouin-zone integrations10.1103/PhysRevB.13.5188 ↗
58. Synthesis, properties and applications of 2D layered MIIIXVI (M = Ga, In; X = S, Se, Te) materials10.1039/C6NR05976G ↗
59. Defects in phosphorene10.1021/acs.jpcc.5b06077 ↗
60. Oxygen defects in phosphorene10.1103/PhysRevLett.114.046801 ↗
61. Covalent interlinking of an aldehyde and an amine on a Au(111) surface in ultrahigh vacuum10.1002/ange.200702859 ↗
62. Formation and structure of inhibitive molecular film of imidazole on iron surface10.1016/j.corsci.2012.11.015 ↗