Heavy-ion irradiation assisted modification of p-type transparent CuAlO2 films: Electrical, optical and thermoelectric properties
Source abstract
Abstract
Abstract Heavy-ion (HI) irradiation is a unique approach to induce defects in semiconductor films. The ion irradiation leaves continuous columnar tracks to create various defects and reduce film density, modulating the thermoelectric properties of semiconductor films. As a p-type transparent oxide semiconductor (TOS), the as-synthesized CuAlO2 films were irradiated with different doses of Fe10+ ions at room temperature using the 320 kV High Voltage Platform, and then post-annealed to improve the microstructure and thermoelectric properties. The irradiated CuAlO2 films, with 15 × 1013 ions cm−2, can achieve an electrical conductivity of 0.14 S cm−1, which is about 200 times larger than the unirradiated counterparts. The Seebeck coefficient reaches up to 189.80 and 208.58 μV K−1 at room temperature and 600 K, respectively. Therefore, a high power factor (PF) of 9.15 μW m−1K−2 is rendered by the irradiated CuAlO2 films, whereas the unirradiated films are not detected in the given measurement range. The improved thermoelectric performance is mainly due to the increased copper vacancies in irradiated films without significantly reducing the crystallinity. The current work presents a promising strategy to improve the thermoelectric performance of semiconductor films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Copper-based nanomaterials and applications · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Influence of carrier density and energy barrier scattering on a high Seebeck coefficient and power factor in transparent thermoelectric copper iodide10.1021/acsaem.0c01724 ↗
2. Copper zinc oxide: investigation into a p-type mixed metal oxide system10.1016/j.vacuum.2016.09.026 ↗
3. Epitaxial growth and characterization of high quality In2O3 films on a-plane sapphire substrates by MOCVD10.1016/j.vacuum.2019.05.035 ↗
4. Optical, electrical, and structural properties of Fe-doped CuAlO2 thin films10.1142/S1793604718501060 ↗
5. Structural and opto-electrical properties of Cu–Al–O thin films prepared by magnetron sputtering method10.1016/j.vacuum.2013.05.019 ↗
6. The photoconductivity properties of transparent Ni doped CuAlO2 films10.1016/j.matlet.2013.01.013 ↗
7. Effects of vacancies and p-doping on the optoelectronic properties of Cu- and Ag-based transparent conducting oxides10.1063/1.5088711 ↗
8. Effect of calcination temperature on structure and thermoelectric properties of CuAlO2 powders10.1007/s10853-017-1602-8 ↗
9. Swift heavy ion irradiation reduces porous silicon thermal conductivity10.1016/j.nimb.2014.06.032 ↗
10. Charge trapping effect in HfO2-based high-k gate dielectric stacks after heavy ion irradiation: the role of oxygen vacancy10.1016/j.nimb.2019.09.009 ↗
11. Role of carrier concentration in swift heavy ion irradiation induced surface modifications10.1016/j.susc.2017.06.006 ↗
12. Ion beam modification of two-dimensional materials: characterization, properties, and applications10.1063/1.4977087 ↗
13. Influence of temperature on surface morphology and photoelectric performance of CuAlO2 thin films10.1016/S1872-2040(18)61119-3 ↗
14. Fast Seebeck coefficient measurement based on dynamic method10.1063/1.4876595 ↗
15. Boosting the adhesivity of π-conjugated polymers by embedding platinum acetylides towards high-performance thermoelectric composites10.3390/polym11040593 ↗
16. Effect of swift heavy 86Kr30+ ions irradiation on optical and electrical properties of p-type transparent Ni-doped CuAlO2 films10.1007/s10854-019-02734-7 ↗
17. Defect-induced photoluminescence from gallium-doped zinc oxide thin films: influence of doping and energetic ion irradiation10.1039/C9CP02148E ↗
18. Pressure and temperature dependence of the lattice dynamics of CuAlO2 investigated by Raman scattering experiments andab initiocalculations10.1103/PhysRevB.74.184301 ↗
19. Controlling radiation damage10.1126/science.1188088 ↗
20. Photovoltaic conversion enhancement of a carbon quantum dots/p-type CuAlO2/n-Type ZnO photoelectric device10.1021/acsami.5b00868 ↗
21. Synergetic improvement strategy on thermoelectric performance of CuAlO2 compacts10.1016/j.ceramint.2018.12.004 ↗
22. Annealing effect on the structural, optical, and electrical properties of CuAlO2 films deposited by magnetron sputtering10.1007/s10853-008-3229-2 ↗
23. Commercially pure titanium and Ti6Al4V: XPS comparison between different commercial Ti dental implants and foils prepared by various oxidation procedures10.1116/1.1247834 ↗
24. Point defect-induced magnetic properties in CuAlO2 films without magnetic impurities10.1007/s00339-016-9727-1 ↗
25. Temperature dependence of Cu–Al spinel formation and its catalytic performance in methanol steam reforming10.1039/C7CY01236E ↗
26. On the film density using high power impulse magnetron sputtering10.1016/j.surfcoat.2010.07.041 ↗
27. Shallow acceptor state in Mg-doped CuAlO2 and its effect on electrical and optical properties: an experimental and first-principles study10.1021/acsami.7b01354 ↗
28. High stability near-broken gap junction for multijunction photovoltaics10.1116/1.5054401 ↗
29. Effect of swift heavy ion (SHI) irradiation on transparent conducting oxide electrodes for dye-sensitized solar cell applications10.1016/j.nimb.2015.04.031 ↗
30. Transition from mobility-activated small polaron to carrier density-activated conduction of sol-gel-derived highly-oriented CuAlO2 thin film and enhanced thermoelectric properties10.1016/j.ceramint.2017.12.163 ↗
31. Investigation of structural, optical and electrical transport properties of yttrium doped La0.7Ca0.3MnO3 perovskites10.1007/s13391-020-00216-1 ↗
32. Engineering of nested Fermi surface and transparent conducting p-type Delafossite CuAlO2: possible lattice instability or transparent superconductivity?10.1016/S0038-1098(02)00875-X ↗
33. Ultrasensitive and selective CuAlO2 sensor toward H2S based on surface sulfuration-desulfuration reaction10.1016/j.snb.2020.128027 ↗
34. Enhancement of thermoelectric efficiency in PbTe by distortion of the electronic density of states10.1126/science.1159725 ↗
35. Ideal band shape in the potential thermoelectric material CuAlO2: comparison to NaxCoO210.1103/PhysRevB.88.075141 ↗
36. The application of combined conductivity and Seebeck effet plots for the analysis of semiconductor properties
37. Effects of aluminum on the properties of p-type Cu–Al–O transparent oxide semiconductor prepared by reactive co-sputtering10.1016/S0040-6090(03)01175-1 ↗
38. Magnetoresistance of CuCrO2-based delafossite films10.1088/1742-6596/200/5/052021 ↗
39. Thermoelectric and transport properties of delafossite CuCrO2:Mg thin films prepared by RF magnetron sputtering10.3390/nano7070157 ↗
40. Electronic properties of 3R-CuAlO2 under pressure: three theoretical approaches10.1103/PhysRevB.81.045203 ↗
41. CuAlO2 thermoelectric compacts by SPS and thermoelectric performance improvement by orientation control10.1016/j.ceramint.2017.06.073 ↗