journal article·2019-11

Fabrication of in-situ Ti-doped CuGaS2 thin films for intermediate band solar cell applications by sputtering with CuGaS2:Ti targets

Yaowei Wei, Daming Zhuang, Ming Zhao, Ning Zhang, Xinping Yu, Xinchen Li, Xunyan Lyu, Chen Wang, Lan Hu

Vacuum· Volume 169
Publisher page

Abstract

Abstract Intermediate band solar cells (IBSCs) have great potential for improving device efficiencies, which can be fabricated by doping appropriate elements into a matrix semiconductor with a high band-gap (Eg). CuGaS2 (CGS) is an absorber with high absorption coefficient and high Eg, which is suitable to be a matrix. And some transition metals are suitable doping elements. Here, in-situ Ti-doped CGS thin films were deposited by sputtering CuGaS2:Ti targets to prepare IBSCs. The targets were fabricated by hot-pressed sintering of ball-milled Cu2S, Ga2S3, and TiS2 mixed powders. In-situ Ti-doped precursor films were prepared by sputtering with these targets. After sulfurization, grains grew up and CGS phases were gained. The Ti atoms were successfully doped into the CGS lattices. The Eg of about 2.42 eV was consistent with CGS. The current density-voltage curve of the solar cell exhibited exponential characteristics. This approach has enormous promise for the preparation of IBSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Increasing the efficiency of ideal solar cells by photon induced transitions at intermediate levels10.1103/PhysRevLett.78.5014 ↗
2. The intermediate band solar cell: progress toward the realization of an attractive concept10.1002/adma.200902388 ↗
3. Effect of capping procedure on quantum dot morphology: implications on optical properties and efficiency of InAs/GaAs quantum dot solar cells10.1016/j.solmat.2018.01.028 ↗
4. Molecular beam epitaxial growth of ZnCdTeO epilayers for intermediate band solar cells10.1016/j.jcrysgro.2012.12.086 ↗
5. Preparation and characterization of the Si:Co layer for intermediate band solar cell applications10.1016/j.optmat.2018.01.018 ↗
6. The investigation of transition metal doped CuGaS2 for promising intermediate band materials10.1039/C4RA10007G ↗
7. Multi-intermediate-band character of Ti-substituted CuGaS2: implications for photovoltaic applications10.1103/PhysRevB.90.075154 ↗
8. Investigation of a novel intermediate band photovoltaic material with wide spectrum solar absorption based on Ti-substituted CuGaS210.1016/j.solener.2014.02.046 ↗
9. Characterization of CuGa1-xTixS2 thin films synthesized by a facile non vacuum method10.1016/j.matlet.2017.08.132 ↗
10. Cr incorporation in CuGaS2 chalcopyrite: a new intermediate-band photovoltaic material with wide-spectrum solar absorption10.1002/pssa.201228721 ↗
11. Observation of an intermediate band in Sn-doped chalcopyrites with wide-spectrum solar response10.1038/srep01286 ↗
12. Effects of Ti-doping on CuGaS2 thin films by co-sputtering and sulfurizing10.1016/j.matlet.2015.11.020 ↗
13. The effects of selenium content on Cu(InGa)Se2 thin film solar cells by sputtering from quaternary target with Se-free post annealing10.1016/j.vacuum.2016.12.041 ↗
14. Fabrication of wide band-gap CuGaSe2 solar cells for tandem device applications by sputtering from a ternary target and post selenization treatment10.1016/j.matlet.2018.07.095 ↗
15. Beyond 10% efficient CZTSSe thin-film solar cells fabricated by a two-step CdS deposition process10.1016/j.solmat.2018.02.002 ↗
16. Path towards high-efficient kesterite solar cells10.1016/j.jechem.2017.10.027 ↗
17. Influence of selenization temperatures on the microstructures and photoelectric properties of iron-ion doped Cu(In,Ga)Se2 thin-film solar cells10.1016/j.vacuum.2018.07.023 ↗
18. Sphere-like CuGaS2 nanoparticles synthesized by a simple biomolecule-assisted solvothermal route10.1016/j.apsusc.2011.07.016 ↗
19. Electrodeposition of Cu-Ga precursor layer from deep eutectic solvent for CuGaS2 solar energy thin film10.1149/2.050406jes ↗
20. Double pulse electrodeposition of Cu-Ga precursor layer for CuGaS2 solar energy thin film10.1149/2.056310jes ↗
21. Laser stimulated changes of the effective energy gap in chalcogenide CuInS2 photovoltaic films10.1016/j.mssp.2015.03.046 ↗