InGaN LED fabricated on Eco-GaN template with a Ga2O3 sacrificial layer for chemical lift-off application
Source abstract
Abstract
Abstract In this study, a nitride light-emitting diode (LED) with an electroplated Cu substrate was detached from a GaN/sapphire (Eco-GaN) template by chemical lift-off (CLO) using a Ga 2 O 3 sacrificial layer. To etch the Ga 2 O 3 sacrificial layer, HF solution was used. In addition, a highly lateral etching rate of 70 μm/h was obtained as the etching treatment was performed. In comparison to the LED device before the CLO process, the vertical-type LED fabricated on the Cu substrate possessed a higher output power of 187 mW, at an injection current of 350 mA. From our evaluation, the output power of LED/Cu substrate had 46% enhancement as compared with that before the CLO process. It reveals that good optoelectronic performance of the LED device on Cu substrate is achieved through the CLO process. Additionally, the separated Eco-GaN template can be re-used, showing high potential in cost-effective LED fabrication.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: GaN-based semiconductor devices and materials · Ga2O3 and related materials · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Nitride-based micron-scale hexagonal pyramids array vertical light emitting diodes by N-polar wet etching10.1364/OE.21.003547 ↗
2. Improved performance of GaN-based vertical light emitting diodes with conducting and transparent single-walled carbon nanotube networks10.1364/OE.21.008062 ↗
3. High-efficiency vertical GaN slab light-emitting diodes using self-coherent directional emitters10.1364/OE.18.011025 ↗
4. Optical patterning of GaN films10.1063/1.117473 ↗
5. Study of the structural damage in the (0001) GaN epilayer processed by laser lift-off techniques10.1063/1.2783134 ↗
6. Effects of laser sources on damage mechanisms and reverse-bias leakages of laser lift-off GaN-based LEDs10.1149/1.3148251 ↗
7. Fabrication of thin-film InGaN light-emitting diode membranes by laser lift-off10.1063/1.124693 ↗
8. Effects of laser sources on the reverse-bias leakages of laser lift-off GaN-based light-emitting diodes10.1063/1.2749866 ↗
9. Leakage current improvement of nitride-based light emitting diodes using CrN buffer layer and its vertical type application by chemical lift-off process10.1063/1.3155422 ↗
10. The fabrication of vertical light-emitting diodes using chemical lift-off process10.1109/LPT.2007.912491 ↗
11. Hydride vapor phase epitaxy of GaN on the vicinal c-sapphire with a CrN interlayer10.1016/j.jcrysgro.2008.09.054 ↗
12. Growth of GaN by metal organic vapor phase epitaxy on ZnO-buffered c-sapphire substrates10.1016/j.jcrysgro.2007.11.137 ↗
13. Use of ZnO thin films as sacrificial templates for metal organic vapor phase epitaxy and chemical lift-off of GaN10.1063/1.2770655 ↗
14. Epitaxial growth and chemical lift-off of GaInN/GaN heterostructures on c- and r-sapphire substrates employing ZnO sacrificial templates10.1116/1.3443220 ↗
15. Transferring thin film GaN LED epi-structure to the Cu substrate by chemical lift-off technology10.1149/1.3582352 ↗
16. Epitaxial relationship between wurtzite GaN and β-Ga2O310.1063/1.2745645 ↗
17. Preparation, structure and electrical properties of epitaxial films of Ga2O3 on sapphire substrates10.1016/0040-6090(76)90322-9 ↗
18. Ga2O3 thin film growth on c-plane sapphire substrates by molecular beam epitaxy for deep-ultraviolet photodetectors10.1143/JJAP.46.7217 ↗
19. The roles of structural imperfections in InGaN-based blue light-emitting diodes and lasers10.1126/science.281.5379.956 ↗