Influence of substrate temperature on the physical properties of thermally evaporated nanocrystalline bismuth sulfide thin films
Source abstract
Abstract
Abstract Nanocrystalline bismuth sulfide thin films were deposited on glass substrate by thermal evaporation technique using the solvothermally synthesized nanometer-sized bismuth sulfide powder as the source material. X-ray diffraction (XRD) analysis revealed that the films are polycrystalline in nature with orthorhombic structure. The crystallinity of the thin films improved with substrate temperature, and the estimated crystallite size are in the nanometer regime. Scanning electron microscope (SEM) analysis showed homogenous distribution of grains with well defined grain boundaries. The optical transmittance of the nanocrystalline bismuth sulfide thin films increases with the increase in substrate temperature, and the optical transition was found to be direct and allowed. The estimated optical band gap energy was found to decrease with the increase in substrate temperature. The electrical resistivity of the bismuth sulfide thin films is of the order of 10 −4 Ω-cm and exhibits semiconductor nature. Experimental results demonstrate that the structural, optical and electrical properties of bismuth sulfide thin films have strong dependence on the substrate temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · Advanced Semiconductor Detectors and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Synthesis of heteroarchitectures of PbS nanostructures well-erected on electrospun TiO2 nanofibers10.1016/j.jcis.2010.02.027 ↗
2. Structural and optical properties of chemically deposited thin films of quantum-sized bismuth(III) sulfide10.1016/j.matchemphys.2005.10.010 ↗
3. Rapid synthesis of Bi and Sb sulfides using electric discharge assisted mechanical milling10.1016/j.jallcom.2007.01.048 ↗
4. Preparation of Bi2S3 thin films with a nanoleaf structure by electrodeposition method10.1016/j.apsusc.2009.04.163 ↗
5. Effect of complexing agent on growth process and properties of nanostructured Bi2S3 thin films deposited by chemical bath deposition method10.1016/j.matchemphys.2010.02.021 ↗
6. Effect of concentration of complexing agent (tartaric acid) on spray-deposited Bi2S3 films10.1016/S0025-5408(00)00312-3 ↗
7. Preparation and characterization of Bi2S3 thin films using modified chemical bath deposition method10.1016/S0025-5408(01)00509-8 ↗
8. Synthesis of different morphologies of bismuth sulfide nanostructures via hydrothermal process in the presence of thioglycolic acid10.1016/j.jallcom.2009.08.152 ↗
9. Thickness dependent properties of chemically deposited Bi2S3 thin films10.1016/S0040-6090(96)09540-5 ↗
10. Kinetics of electrical conductivity enhancement in bismuth sulphide thin films. Part II: optoelectronic properties (film) and phase transformations (powder) under oxygen annealing10.1016/S0022-3697(96)00073-X ↗
11. Electrical and optical properties of Bi2S3 thin films deposited by successive ionic layer adsorption and reaction (SILAR) method10.1016/j.matchemphys.2008.01.043 ↗
12. Modifications of structural, optical and electrical properties of nanocrystalline bismuth sulphide by using swift heavy ions10.1016/j.cap.2008.03.005 ↗
13. Influence of substrate temperature on the structural, optical and electrical properties of zinc selenide (ZnSe) thin films10.1088/0022-3727/39/22/007 ↗
14. Effect of substrate temperature on the structural and electrical properties of CIGS films based on the one-stage co-evaporation process10.1088/0268-1242/25/5/055007 ↗
15. Optical and electrical properties of Bi2S3 films deposited by spray pyrolysis10.1016/j.tsf.2005.09.186 ↗
16. Inclusion of polyaniline in electrodeposited bismuth sulphide thin films: synthesis and characterization10.1016/j.cap.2009.01.003 ↗
17. Comparison of the properties of bismuth sulfide thin films prepared by thermal evaporation and chemical bath deposition10.1006/jssc.1997.7670 ↗
18. Uniform Bi2S3 nanowires: structure, growth, and field-effect transistors10.1016/j.matlet.2009.06.010 ↗
19. The influence of substrate temperature on the morphology, optical and electrical properties of thermal-evaporated ZnTe thin films10.1016/j.apsusc.2009.09.023 ↗
20. Physical properties of flash evaporated In2O3 films prepared at different substrate temperatures10.1016/j.matlet.2007.01.109 ↗
21. Substrate and annealing temperature effects on the optical and electrical properties of Ge20Te80 films10.1016/S0042-207X(03)00108-8 ↗
22. Influence of substrate temperature on the properties of vacuum evaporated InSb films10.1002/crat.200410385 ↗
23. A simple solution growth technique for PbSe thin films10.1016/S0167-577X(98)00127-X ↗
24. Influence of substrate temperature on physical properties of sprayed Zn0.85Mn0.15O films10.1016/j.cap.2008.06.016 ↗
25. Studies on chemically deposited nanocrystalline Bi2S3 thin films10.1016/S0025-5408(00)00244-0 ↗
26. Influence of preparation parameters on physical properties of Bi2S3 films prepared by the spray pyrolysis method10.1016/S0921-4526(01)00272-1 ↗
27. Influence of thickness and growth temperature on the optical and electrical properties of ZnO thin films10.1016/j.tsf.2008.11.143 ↗
28. Preparation and characterization of electrodeposited Bi2S3 thin films prepared from non-aqueous media10.1016/S0254-0584(99)00259-X ↗
29. A template-free route to prepare Bi2S3 nanostructures10.1016/j.physb.2009.11.088 ↗
30. Surfactant-assisted solvothermal synthesis of Bi2S3 nanorods10.1016/j.jcrysgro.2007.03.062 ↗
31. Effect of thickness on the electrical and optical properties of Sb doped SnO2 (ATO) thin films10.1007/s10832-004-5093-z ↗
32. Effects of substrate temperature on electrical and structural properties of copper thin films10.1016/j.mejo.2006.01.011 ↗
33. Physical, optical and electrical properties of copper selenide (CuSe) thin films deposited by solution growth technique at room temperature10.1016/j.jallcom.2007.03.068 ↗
34. Spray pyrolysed bismuth oxide thin films and their characterization10.1016/j.materresbull.2006.01.024 ↗