Effects of metal oxide as an anode interlayer for organic photovoltaics
Source abstract
Abstract
Abstract In this study, polymer:fullerene bulk-heterojunction hybrid solar cells with the structure indium tin oxide (ITO)/nickel oxide (NiO)/poly (3-hexylthiophene) (P3HT):[6, 6]-phenyl C61-butyric(PCBM):titania (TiO2):platinum (Pt) nanoparticles (NPs)/Ca/Al were fabricated. The effects of a p-type NiO thin layer deposited by thermal evaporation between the active layer P3HT:PCBM:TiO 2 :Pt and ITO on cell performance were examined. The results show that the NiO interfacial layer between the ITO and active layer can increase the efficiency and stability of the prepared hybrid solar cells. The optimum cell performance by ITO/NiO(5 nm)/P3HT:PCBM:TiO 2 (15 wt.%):Pt (0.03 wt.%)/Ca/Al (best cell structure) is an open-circuit voltage (Voc) = 0.61 V, short circuit current density (Jsc) = 6.22 mA/cm 2 , fill factor (FF) = 54.8%, and η = 2.1%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.