article·2016-03-19

p-Type highly conductive and transparent NdF3-doped tin oxide films prepared by dip coating

Quang-Phu Tran, Jau-Shiung Fang, An-Ya Lo, Tsung‐Shune Chin

Publisher page

Abstract

Abstract Transparent p-type conducting oxide (TCO) films with high conductivity and transparency are in great need to couple with n-type TCO for various electro-optical devices. The purpose of the current study is to explore p-type TCO films with low electrical resistivity and high optical transmittance. We prepared NdF 3 -added SnO 2 (NFTO) thin films, with 0 to 5 mol% NdF 3 , on a glass substrate by sol–gel dip-coating and post-annealed at 475 °C. Structural, optical and electrical properties of the resultant NFTO films were investigated. X-ray diffraction patterns indicate tetragonal rutile SnO 2 structure with a preferred (110) orientation for all studied films. The absence of impurity peaks indicates that Nd and F atoms may completely dissolve in SnO 2 lattice. All films showed excellent transmittance of 84.7 to 90.6% at a wavelength of 550 nm. Optical band gap of the NFTO films reduces from 3.94 eV for un-doped film to a minimum of 3.75 eV for the film with 4 mol% NdF 3 . We confirmed p-type conduction of NFTO films using both Hall-effect and Seebeck coefficient measurements. The film with 2 mol% NdF 3 shows the lowest electrical resistivity, 8.2 × 10 − 3 Ω cm, the highest hole-concentration, 8.96 × 10 19 cm − 3 and a Hall mobility of 9.74 cm 2 V − 1 s − 1 . The developed p-type NdF 3 added SnO 2 TCO films can couple with n-type SnO 2 TCO for homo-junctions, which will lead to wide applications in optoelectronics.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Copper-based nanomaterials and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.