Ferroelectric properties of the organic films of poly(vinylidene fluoride-trifluoroethylene blended with inorganic Pb(Zr, Ti)O3
Source abstract
Abstract
Abstract Precursor films based on poly(vinylidene fluoride-trifluoroethylene) P(VDF-TrFE) and P(VDF-TrFE) blended with Pb(Zr,Ti)O 3 were spin-coated on Si-substrates and subsequently annealed at 170 °C. X-ray diffraction studies showed that the amorphous precursor films crystallize to the γ-phase P(VDF-TrFE) without involving the formation of other polymorphs when the P(VDF-TrFE) is blended with Pb(Zr,Ti)O 3 , resulting in phase mixtures composed of a crystalline γ-phase P(VDF-TrFE) and an amorphous Pb(Zr,Ti)O 3 . A larger memory window width and higher accumulation capacitance, as well as a lower leakage current density are induced by the blended Pb(Zr,Ti)O 3 within the low operating voltage ranges from − 3.0 to 3.0 V and from − 2.0 to 2.0 V for 20 wt% and 40 wt% Pb(Zr,Ti)O 3 blending, respectively. These improvements not only in the hysteretic capacitance–voltage characteristics but also in the leakage current density–electric field are directly correlated with the phase mixtures, their volume fraction, dipole moments, and formation of interface layer between the blended film and Si substrate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Advanced Sensor and Energy Harvesting Materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.