Ferroelectric lanthanum-substituted Bi4Ti3O12 thin films fabricated on p-type Si(100) substrates by a sol–gel method
Source abstract
Abstract
Abstract Bi3.25La0.75Ti3O12 (BLT) thin films have been successfully fabricated on p-type Si(100) substrates by a sol–gel spin-coating method. The microstructures and surface morphologies of the BLT thin films on p-type Si(100) substrates annealed at 700 °C for 30 min in oxygen atmosphere were examined by an X-ray diffractometer and a scanning electron microscope, respectively. The BLT/p-type Si(100) capacitors annealed at 700 °C for 30 min exhibit good capacitance–voltage (C–V) characteristics and large memory window of approximately 6 V with a sweep voltage of ±16 V. From the frequency dependency of C–V characteristics of the BLT/p-type Si(100) capacitors, the fixed charge density (Nfc) at the interface of BLT/p-type Si(100) was calculated as approximately 1.24×1012/cm2. The humps and valleys observed in C–V curves were interpreted by introducing the electron charge injection and barrier-lowering effect at the interface of BLT/p-type Si(100). Based on the voltage and the frequency dependent C–V measurements, the memory windows of BLT/p-type Si(100) capacitor are significantly influenced by the electron charge injection and polarization reverse.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.