article·2007-08-27

Flexible and lithography-compatible copper foil substrates for ferroelectric thin films

Brian Laughlin, Jon F. Ihlefeld, Patrick Daniels, Jon‐Paul Maria

Publisher page

Abstract

Abstract A process has been developed for preparing a low surface roughness copper foil by evaporation and subsequent peel-off of copper metal layers on glass slides. These 15 micron thick substrates exhibited roughness values between 1 and 2 nm root-mean-square (RMS) and 9 nm RMS over 25 μm2 and 100 μm2 analysis areas, respectively. The deposition and crystallization of barium strontium titanate layers were demonstrated on these smoother variant foils. The fully processed dielectric layers exhibited field tunability greater than 5:1, and could withstand fields in excess of 750 kV/cm. High field loss tangents below 0.007 were observed, making these materials excellent candidates for microwave devices. Finally, a process of lamination and contact lithography was used to demonstrate patterning of micron-scale features suitable for microwave circuit element designs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.