Structural and optical studies of ZnS nanocrystal films prepared by sulfosalicylic acid (C7H6O6S)-assisted galvanostatic deposition with subsequent annealing
Source abstract
Abstract
Abstract Zinc sulfide (ZnS) semiconductor nanocrystal films have been prepared on indium tin oxide coated glass substrates by sulfosalicylic acid (C 7 H 6 O 6 S)-assisted galvanostatic deposition with subsequent annealing. The deposition was performed at 10 mA cm − 2 in acidic electrolytes containing 15–30 mM Zn(CH 3 COO) 2 , 20 mM Na 2 S 2 O 3 , 200 mM LiCl, 0.375 mM Na 2 SO 3 , and 0 or 0.2 mM C 7 H 6 O 6 S. Results show that the presence of C 7 H 6 O 6 S can suppress the precipitation of Zn and S impurity phases during the ZnS deposition process. As the [C 7 H 6 O 6 S] = 0.2 mM and [Zn 2 + ] = 20 mM, the deposited ZnS film exhibits only hexagonal structure with an ideal Zn/S atomic ratio of 1.03 and a close-packed granular morphology. But its band gap about 2.86 eV is narrower than the common value of ZnS, probably due to the existence of some spurious acetate species and defect states. By annealing the film at 400 °C for 60 min, its band gap increased up to 3.70 eV, despite that its crystalline phase transformed into cubic structure which usually shows the narrower band gap than hexagonal ZnS. The significant band gap widening could be ascribed to the degradation of spurious acetate species and the reduction of various possible defect states in the annealing process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quantum Dots Synthesis And Properties · ZnO doping and properties · Copper-based nanomaterials and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.