article·2013-04-06

The effects of UV radiation on SiC(O)N/SiOC(− H) thin films grown on Si substrates using plasma-enhanced atomic layer deposition

R. Navamathavan, Chang Young Kim, Heon Ju Lee, Younghun Yu, Chi Kyu Choi

Publisher page

Abstract

Abstract Multilayer Cu/SiC(O)N/dense SiOC(− H)/porous SiOC(− H)/ p -Si(100) thin-film stacks were fabricated. A 200-nm-thick porous SiOC(− H) film was deposited on an Si substrate using plasma-enhanced chemical vapor deposition. Subsequently, a 60-nm-thick dense SiOC(− H) film followed by a 20-nm-thick SiC(O)N film was deposited using plasma-enhanced atomic layer deposition. These multilayer films were then irradiated with ultraviolet (UV) light at 400 °C for various times in the range 5 to 20 min to improve their structural, mechanical, and electrical properties. The effects of the UV radiation on the interfacial bonding configurations and the mechanical properties of the interface between the SiC(O)N etch stop layer and the porous low- k SiOC(− H) film were investigated. The elemental concentrations of Si, C, N, and O were determined at the SiC(O)N/SiOC(− H) interfaces using Auger electron spectroscopy depth-profile analysis, and the electrical properties of the Cu/SiC(O)N/SiOC(− H)/Si metal-insulator-semiconductor structures were investigated using capacitance–voltage and current–voltage profiling. Based on our experimental results, UV exposure for 5 to 10 min is optimal for improving the characteristics of Cu/SiC(O)N/SiOC(− H)/Si multilayered films.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.