article·2005-03-01

The performance of Zr as barrier layer for Pt bottom electrodes in Pb(Zr,Ti)O3 thin film capacitors

Cezarina Cela Mardare, Ednan Joanni, Andrei Ionut Mardare, Carlos Sá, Pedro B. Tavares

Publisher page

Abstract

The performance of Zr as adhesion/barrier layer for Pt bottom electrodes with the Pt deposited at different temperatures and its effect on the properties of Pb(Zr0.52, Ti0.48)O3 (PZT) thin films deposited by radio-frequency magnetron sputtering and crystallized either in the furnace or by rapid thermal annealing was investigated. Platinum deposition temperatures and annealing method affected only slightly the (100) PZT orientation. The surface morphology of the films was strongly influenced by the Pt deposition temperature: when Pt was made at low temperatures, its grain size was small and the surface of the PZT made over it was smooth, whereas for Pt high deposition temperatures, the grain size was bigger and the PZT surface was rough. The best ferroelectric properties (Pr=22 μC/cm2 for Ec=110 kV/cm and Pr=24 μC/cm2 for Ec=95 kV/cm) and the lowest leakage currents (7.2×10−8 A/cm2 and 8.2×10−8 A/cm2 for a 125 kV/cm field) were obtained for the PZT films crystallized in the furnace with Pt deposited at room temperature and 500 °C, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.