article·2010-12-09

Large area ashing process using an atmospheric pressure plasma

Seungryul Yoo, Taihyeop Lho, Dong Chan Seok, Yong Cheol Hong, Bong Ju Lee

Publisher page

Abstract

Abstract We present an atmospheric pressure plasma processing for ashing photo-resist (PR) layer in the flat panel display and semiconductor manufacturing. Removal of KrF PR, i-line PR, and negative color filter PR layers on a 6th-generation large area (1640 × 30 mm 2 ) substrate was investigated by making use of a dielectric barrier discharge (DBD) plasma device, which is with a large number of gas-flowing holes. The nitrogen DBD plasma was generated with a mixture of compressed dry air (CDA) and SF 6 . To prevent thermal shrinkage of the PR layer, samples were maintained at a temperature less than 100 °C. Uniformity and reproducibility experiments have been carried out in terms of treatment time. Eventually, we obtained an ashing rate of about 600 nm/min for negative color filter PR, and 450 nm/min for KrF and i-line PR at a CDA concentration of 1%, a SF 6 concentration of 0.5%, a carrier N 2 gas flow rate of 1500 liters per minute (lpm) and at an applied power of 8 kW. Amorphous-Si layer loss which strongly depends on the fluorine radicals was at an acceptable level of 5 nm/min in the given conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Plasma Applications and Diagnostics · Plasma Diagnostics and Applications · Surface Modification and Superhydrophobicity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.