article·2003-06-21

Device characteristics of AlGaAs/InGaAs HEMTs fabricated by inductively coupled plasma etching

Jinhee Lee, Hyung‐Sup Yoon, Jae Yeob Shim, Hae-Chun Kim

Publisher page

Abstract

Abstract Passivated 0.15-μm pseudomorphic high electron mobility transistors are fabricated by combining a wide head T-shaped gate using a dose split method of electron beam lithography and a highly selective and uniform inductively coupled plasma (ICP) recess process. The good DC uniformity was obtained across 4-inch wafer and the uniformity of maximum extrinsic transconductance and threshold voltage are 1.3 and 2.9%, respectively. The obtained uniform device characteristics are attributed to the gate recess etch process with the uniformity less than 5% by the ICP gate recess process. The maximum extrinsic transconductance was 568 mS mm −1 . The cut-off frequency and maximum oscillation frequency were 90 and 160 GHz, respectively. The noise figure minimum measured at 28 GHz was 0.93 dB with associated gain of 10.03 dB. At 40 GHz, F min is 1.3 dB with G a of 8.33 dB.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · GaN-based semiconductor devices and materials · Semiconductor Quantum Structures and Devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.