article·2007-11-14

Ferroelectric In3+-added Bi4Ti3O12 films obtained by magnetron sputtering with two series of In3+- and Bi3+-varied targets

Dong–Hau Kuo, Kuo-Ping Chiang

Publisher page

Abstract

Abstract In 3+ -added Bi 4 Ti 3 O 12 films were deposited by the magnetron sputtering followed by annealing at 650 °C for crystallization. To obtain the ferroelectric performance, sputtering targets of the Bi 2 O 3 -In 2 O 3 -TiO 2 system for In 3+ -added Bi 4 Ti 3 O 12 films were systematically fabricated with varying In 3+ and Bi 3+ contents. The variations between the compositions of the targets and films were investigated. Analyses of structure, microstructure, composition, ferroelectricity, and electric properties were used to evaluate the In 3+ -added films. The films of In-0.1- and In-0.2-BInT (or Bi-0-BInT) obtained from the targets of Bi 2.45 In 0.45 Ti 2.9 O z and Bi 2.45 In 0.55 Ti 2.9 O z formed single phase after annealing. They had better remanent polarization of ∼ 7.0 μC/cm 2 accompanied by a coercive field of ∼ 210 kV/cm, a dielectric constant of 133 ∼ 142 at 1 MHz, and a lower leakage current density of ∼ 10 − 8 A/cm 2 at 75 kV/cm. The lower leakage current density was related to the drop of ion-jump conduction from the Ti 4+ ↔ Ti 3+ transition. Although the indium substitution mainly occupying on the B or Ti site enhanced ferroelectricity by lattice distortion, it created oxygen vacancy to deteriorate ferroelectricity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Multiferroics and related materials · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.