article·2007-01-18

Influence of process steps on the performance of microcrystalline silicon thin film transistors

Maher Oudwan, Y. Djeridane, Alexey Abramov, Bernard Aventurier, Pere Roca i Cabarrocas, François Templier

Publisher page

Abstract

Abstract Bottom gate microcrystalline silicon thin film transistors (μc-Si TFT) have been realized with two types of films: μc-Si(1) and μc-Si(2) with crystalline fraction of 80% and close to 100% respectively. On these TFTs we applied two types of passivation (SiN x and resist). μc-Si TFTs with resist as a passivation layer present a low leakage current of about 2.10 − 12 A for V G = − 10 and V D = 0.1V an ON to OFF current ratio of 10 6 , a threshold voltage of 7 V, a linear mobility of 0.1 cm 2 /V s, and a sub-threshold voltage of 0.9 V/dec. Microcrystalline silicon TFTs with SiN x as a passivation present a new phenomenon: a parasitic current for negative gate voltage (− 15 V) causes a bump and changes the shape of the sub-threshold region. This excess current can be explained by and oxygen contamination at the back interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Silicon Nanostructures and Photoluminescence · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.