journal article·2020-10

A diketopyrrolopyrrole conjugated polymer based on 4,4ʹ-difluoro-2,2ʹ-bithiophene for organic thin-film transistors and organic photovoltaics

Yinghui He, Badrou Reda Aïch, Jianping Lu, Salima Alem, Stephen Lang, Raluca Movileanu, Jean-Marc Baribeau, Ye Tao

Thin Solid Films· Volume 711
Publisher page

Abstract

Abstract The synthesis of 4,4ʹ-difluoro-2,2ʹ-bithiophene is reported and an alternating donor-acceptor copolymer of this moiety and diketopyrrolopyrrole has been prepared. This polymer has a lower highest occupied molecular orbital than its non-fluorinated analogue polymer. Organic thin film transistors based on this polymer showed p-type charge transport behavior and a hole mobility of 0.21 cm2 V−1 s−1 in bottom-gate bottom-contact devices. Organic solar cells using this polymer as donor and [6,6]-Phenyl-C71-butyric acid methyl ester as acceptor achieved a power conversion efficiency of 3.4% with a high fill factor of 69%. Our morphology analysis showed that there was a lack of long-range ordered structure in the neat polymer thin film, which could cause the inferior device performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. 10.8% Efficiency Polymer Solar Cells Based on PTB7-Th and PC 71 BM via Binary Solvent Additives Treatment10.1002/adfm.201602181 ↗
2. A Thienoisoindigo-Naphthalene Polymer with Ultrahigh Mobility of 14.4 cm 2 /V·s That Substantially Exceeds Benchmark Values for Amorphous Silicon Semiconductors10.1021/ja504537v ↗
3. Progress in Understanding Degradation Mechanisms and Improving Stability in Organic Photovoltaics10.1002/adma.201603940 ↗
4. Strong Electron-Deficient Polymers Lead to High Electron Mobility in Air and Their Morphology-Dependent Transport Behaviors10.1002/adma.201600541 ↗
5. A new n-type polymer based on N, N’-dialkoxynaphthalenediimide (NDIO) for organic thin-film transistors and all-polymer solar cells10.1039/C7TC05145J ↗
6. Designing π-conjugated polymers for organic electronics10.1016/j.progpolymsci.2013.09.005 ↗
7. Strong acceptors in donor–acceptor polymers for high performance thin film transistors10.1039/c2ee23505f ↗
8. Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency10.1002/adma.201908205 ↗
9. Influence of alkyl chain branching positions on the hole mobilities of polymer thin-film transistors10.1002/adma.201202689 ↗
10. A BDOPV-Based Donor-Acceptor Polymer for High-Performance n-Type and Oxygen-Doped Ambipolar Field-Effect Transistors10.1002/adma.201302278 ↗
11. Influence of side chain length and bifurcation point on the crystalline structure and charge transport of diketopyrrolopyrrole-quaterthiophene copolymers (PDQTs)10.1039/C3TC32219J ↗
12. Isoindigo-based polymer solar cells with high open circuit voltages up to 1.01 V10.1016/j.orgel.2016.04.016 ↗
13. Semiconducting Properties and Geometry-Directed Self-Assembly of Heptacyclic Anthradithiophene Diimide-Based Polymers10.1021/acs.chemmater.8b05353 ↗
14. Over 11% Efficiency in Tandem Polymer Solar Cells Featured by a Low-Band-Gap Polymer with Fine-Tuned Properties10.1002/adma.201600373 ↗
15. Regular terpolymers with fluorinated bithiophene units for high-performing photovoltaic cells10.1039/C6PY00901H ↗
16. Implication of Fluorine Atom on Electronic Properties, Ordering Structures, and Photovoltaic Performance in Naphthobisthiadiazole-Based Semiconducting Polymers10.1021/jacs.6b05418 ↗
17. Wide bandgap copolymers with vertical benzodithiophene dicarboxylate for high-performance polymer solar cells with an efficiency up to 7.49%10.1039/C6TA07364F ↗
18. Diketopyrrolopyrrole-Based Conjugated Polymers Synthesized via Direct Arylation Polycondensation for High Mobility Pure n-Channel Organic Field-Effect Transistors10.1002/adfm.201801097 ↗
19. Side Chain Selection for Designing Highly Efficient Photovoltaic Polymers with 2D-Conjugated Structure10.1021/ma500829r ↗
20. Sequential Deposition of Organic Films with Eco-Compatible Solvents Improves Performance and Enables Over 12%-Efficiency Nonfullerene Solar Cells10.1002/adma.201808153 ↗
21. Highly Efficient Photovoltaic Polymers Based on Benzodithiophene and Quinoxaline with Deeper HOMO Levels10.1021/acs.macromol.5b00829 ↗
22. High Mobility Ambipolar Diketopyrrolopyrrole-Based Conjugated Polymer Synthesized Via Direct Arylation Polycondensation10.1002/adma.201502896 ↗
23. An aromatic amine-containing polymer as an additive to ambipolar polymer semiconductor realizing unipolar n-type charge transport10.1016/j.orgel.2017.07.016 ↗
24. Influence of Backbone Fluorination in Regioregular Poly(3-alkyl-4-fluoro)thiophenes10.1021/jacs.5b02785 ↗
25. Chromophore Fluorination Enhances Crystallization and Stability of Soluble Anthradithiophene Semiconductors, J10.1021/ja073235k ↗
26. Record High Electron Mobility of 6.3 cm 2 V −1 s −1 Achieved for Polymer Semiconductors Using a New Building Block10.1002/adma.201305981 ↗
27. Investigation of Structure–Property Relationships in Diketopyrrolopyrrole-Based Polymer Semiconductors via Side-Chain Engineering10.1021/cm504545e ↗
28. Efficient chemical structure and device engineering for achieving difluorinated 2,2ʹ-bithiophene-based small molecular organic solar cells with 9.0% efficiency10.1039/C8TA02699H ↗
29. Diketopyrrolopyrrole Polymers for Organic Solar Cells10.1021/acs.accounts.5b00334 ↗
30. Effect of the Fibrillar Microstructure on the Efficiency of High Molecular Weight Diketopyrrolopyrrole-Based Polymer Solar Cells10.1002/adma.201304360 ↗
31. High-Molecular-Weight Regular Alternating Diketopyrrolopyrrole-based Terpolymers for Efficient Organic Solar Cells10.1002/ange.201302319 ↗
32. Universal correlation between fibril width and quantum efficiency in diketopyrrolopyrrole-based polymer solar cells10.1021/ja4101003 ↗
33. Organic photovoltaics with thick active layers (~800 nm) using a high mobility polymer donor10.1016/j.solmat.2013.02.033 ↗
34. Efficient small bandgap polymer solar cells with high fill factors for 300 nm thick films10.1002/adma.201300017 ↗
35. Small-Bandgap Polymer Solar Cells with Unprecedented Short-Circuit Current Density and High Fill Factor10.1002/adma.201501132 ↗
36. Tetrathienoacene Copolymers As High Mobility, Soluble Organic Semiconductors10.1021/ja804872x ↗
37. Fluorinated Thiophene Units Improve Photovoltaic Device Performance of Donor–Acceptor Copolymers10.1021/acs.chemmater.7b01683 ↗
38. High mobility isoindigo-based π-extended conjugated polymers bearing di(thienyl)ethylene in thin-film transistors10.1039/c3py00735a ↗
39. Annealing-free high-mobility diketopyrrolopyrrole-quaterthiophene copolymer for solution-processed organic thin film transistors10.1021/ja1085996 ↗
40. A Nonchlorinated Solvent-Processable Fluorinated Planar Conjugated Polymer for Flexible Field-Effect Transistors10.1021/acsami.7b08071 ↗
41. Charge mobility enhancement for diketopyrrolopyrrole-based conjugated polymers by partial replacement of branching alkyl chains with linear ones10.1039/C7QM00307B ↗
42. Novel stable (3E,7E)-3,7-bis(2-oxoindolin-3-ylidene)benzo[1,2-b:4,5-bʹ]difuran-2,6(3H,7H)-dione based donor–acceptor polymer semiconductors for n-type organic thin film transistors10.1039/c3cc40531a ↗
43. Single-Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency10.1002/adma.201404535 ↗
44. Effect of Fluorination on Molecular Orientation of Conjugated Polymers in High Performance Field-Effect Transistors10.1021/acs.macromol.6b01446 ↗
45. Bulk-heterojunction solar cells with enriched polymer contents10.1016/j.orgel.2016.10.030 ↗
46. Recent Developments in the Optimization of the Bulk Heterojunction Morphology of Polymer: Fullerene Solar Cells10.3390/ma11122560 ↗
47. Optimizing Polymer Solar Cells Using Non-Halogenated Solvent Blends10.3390/polym11030544 ↗
48. Efficient polymer solar cells based on a low bandgap semi-crystalline DPP polymer-PCBM blends10.1002/adma.201200902 ↗
49. Design Rules for Donors in Bulk-Heterojunction Solar Cells—Towards 10 % Energy-Conversion Efficiency10.1002/adma.200501717 ↗
50. Fullerene Derivative-Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low-Bandgap Polymer (PTB7-Th) for High Performance10.1002/adma.201301476 ↗
51. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
52. Fast charge separation in a non-fullerene organic solar cell with a small driving force10.1038/nenergy.2016.89 ↗